Essex · England
Remedial Sealant in Roxwell
Removing failed, mouldy or leaking sealant and putting it right in Roxwell, with a one-year guarantee on every job. Ask us for a quote.
- A shower that leaks however often it’s resealed
- Smears and lumps from a botched reseal
- Beads that never stuck properly
Bathrooms and kitchens in Roxwell
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you live in an older home near Church of St Michael and All Angels, walls and floors in older homes can move, and sealant and grout show it first. For landlords with property near Chelmsford station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Roxwell is about 4 miles west of Chelmsford, in Essex. We carry out remedial sealant for homes and businesses in Roxwell and the surrounding area. We cover 644 towns and villages across Essex.
Our applicators cover all of CM1 for remedial sealant and the streets around it. Remedial sealant is available to properties on The Street, Church Green and St Michael's Drive and the roads around them. Other places close to Roxwell include Boyton Cross (1 mile north-east), Newney Green (1 mile south), Chalk End (2 miles north-west), Shellow Bowells (2 miles west) and Radley Green (2 miles south-west). Within a short drive, we also cover Chelmsford (4 miles east), Basildon (13 miles south), Braintree (12 miles north-east), Harlow (12 miles west), Brentwood (9 miles south) and Maldon (13 miles east).
Around Roxwell
Typical jobs here are in homes near The Chequers Inn and the streets around them. Roxwell’s nearest station is Chelmsford station, about 3.8 miles east of the centre. Nearby you’ll also find Willingale Doe (2.8 miles west) and Peter Edwards Museum And Library (3.9 miles east). Green spaces nearby include Newland Grove.
How we handle remedial sealant in Roxwell
Not every leak is a sealant leak. A cracked tray, a failed shower valve or a leaking waste can look just the same. If that is what we find, we will tell you rather than reseal something that won’t fix it. If you have products that weren’t meant for the joint and wide, uneven beads that look worse than the old ones, we can put it right, on leaking tray & enclosure joints, shrunken worktop sealant and mouldy bath & shower sealant alike.
Being in a small place like Roxwell makes no difference to the job itself: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
You’re covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.
- Where
- Roxwell (CM1)
- Region
- Essex
- Cover
- A year, on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Why act early in Roxwell
Repeat failures have a cause. Taking time to find the cause, whether it’s movement, a leak or the wrong product, is what stops it happening again. Around Roxwell, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
Why us?
- Every job guaranteed for a year
- Domestic, commercial and hotel work
- 20+ years of sealant experience
- Rated 4.9 stars on Google
Take a look at our cost guide or what customers say.
Places near Roxwell
Also in Roxwell
When something else is needed
We will not take on work that won’t last, so these are the limits:
- Sealant in an older building that needs testing for asbestos first
- Cracks in the fitting rather than the joint
- Leaks from a shower valve, waste or pipework (a plumber’s job)
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly.
What we seal
- Mouldy bath & shower sealant
- Expansion joints
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Failed movement joints
What affects the cost of remedial sealant
We do not publish a price list, because no two jobs are the same. The quote depends on:
- How many rooms, windows or areas are involved
- The old material and how stubborn it is
- Mould in or behind the old joints
- Which sealant suits the joint
The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first and give you a clear price before any work starts.
What to tell us for a quote
When you call or email, it’s useful to know:
- Where the property is
- Whether it has been sealed before
- The type of property
- Photos by email, if that is easy
Every job is quoted individually. Simply ring 0345 464 0079 or email us and describe the job and send photos if you have them.
Roxwell questions
Do you work for landlords with property near Chelmsford station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Do you cover smaller places like Roxwell?
Yes, Roxwell is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
What do you need from me for a quote?
Only a few details: the address or postcode, what’s wrong and any access issues. Then ring 0345 464 0079 or send us an email.
Do I need to be at home?
It depends on the job. Inside work needs someone to give us access, and for outside work we will agree access with you when we book.
Can you do several jobs on one visit?
Of course. Doing several areas at once is usually more efficient.
Which products do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
My shower still leaks after a reseal. Can you sort it?
Yes. We will take all the sealant out, look for why it failed and reseal it properly.
Where do you work from?
We are based in Crawley, and we cover South East England, London and all of Scotland.
What we do, step by step
Before we leave, we go over the finished joints with you. The visit itself normally takes a few hours for most joints, depending on how much old sealant has to come out, depending on how much there is to do. Somewhere as small as Roxwell, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Preparing for the visit
- For business premises, tell us about site rules or sign-in
- Move anything stored near the joints
- Keep children and pets away from the work area
Ask for a quote
If you’re in Roxwell and need remedial sealant, phone 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Advice
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
We also work for property managers and facilities teams in Roxwell and across Essex. Several sites can go on one quote.
What the job involves on each surface
Windows & doors
Frames resealed over the top end up with hard, layered mastic. All of it is cut out and the frame and wall cleaned before backing and resealing.
Worktops & kitchens
If a worktop moves when you lean on it, the sealant will keep splitting. It needs fixing down first, which we’ll point out.
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.