West Sussex · England
Remedial Sealant in Pound Hill
Problem with your failed sealant joints in Pound Hill? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Decorators’ caulk around a bath or shower
- Sealant peeling off a dusty or damp surface
- Floor or wall movement joints that have failed
What we cannot put right
Sealant isn’t the answer to every problem, and we will tell you before we start. It won’t solve:
- Movement from fittings that are not supported
- Older mastics that may need an asbestos check before removal
- Water damage behind tiles that needs a tiler
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we’ll tell you honestly.
Where we work in Pound Hill
- Mouldy bath & shower sealant
- Expansion joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Failed movement joints
- Botched or over-sealed joints
Remedial sealant in Pound Hill
In Pound Hill, as anywhere, remedial jobs tend to look alike: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. Each is stripped back and done again properly. If you are dealing with sealant peeling off a dusty or damp surface and dark patches showing through the sealant, we can help.
Around Pound Hill, you’ll mostly find houses and bungalows, from older cottages to newer builds. Sealant and grout wear out here just as they do in a big town.
A one-year guarantee comes as standard.
- Location
- Pound Hill (RH10)
- Wider area
- West Sussex
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before work begins
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Your questions about remedial sealant in Pound Hill
Do older homes in Pound Hill need their sealant replacing?
Usually, yes, if it’s cracked, shrunk, mouldy or coming away. New sealant will not stick to old, so the old bead has to come out completely first.
Do you work for landlords with property near Three Bridges station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Will it make a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
How long should I leave it?
Most sealants are touch-dry well before they’re fully cured. We will give you the cure time for the product we used before we leave.
What does remedial sealant cost?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before any work starts.
Do you fix expansion and movement joints?
Yes. Failed movement joints are cut out and resealed with backing and a flexible sealant suited to the movement.
Can you work on commercial sites?
Yes. Commercial and hotel work is a large part of what we do. Working times can be discussed when we quote.
Can you strip sealant from an acrylic tray safely?
Yes, with care. The old bead is cut and lifted with tools that suit the surface, then clean off the residue. Any existing damage is pointed out before we start.
Aftercare tips
No joint lasts for ever, but care makes a real difference. A few tips:
- Run the fan after every shower
- Deal with small splits early
- Keep bleach and abrasives off the bead
- Report a tray that rocks or a worktop that lifts
Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.
Don’t keep resealing the same joint. Have someone find out why, otherwise the next attempt will fail too.
How the job changes by surface
Leaking trays & enclosures
When failed joints are the cause, they’re all cut out and renewed, tray edges and screen profiles included.
Windows & doors
Failed frame mastic is often hard, cracked and in several layers. All of it is cut out and the frame and wall cleaned.
Quotes for remedial sealant in Pound Hill
We don’t publish a price list, because no two jobs are the same. What we look at:
- Working hours on commercial sites
- Whether the work is at height
- The size of the job
- Whether old sealant or filler has to be cut out
Doing several joints on one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.
Asking for a quote
To help us quote quickly, please include:
- Where the property is
- How many joints, rooms or windows are involved
- How we’d reach the joints
- Whether it has been sealed before
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we’ll come back to you with a quote.
Also near Pound Hill
More services for Pound Hill
What remedial sealant looks like in Pound Hill
Pound Hill has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Crawley, which Pound Hill is part of, is one of England’s post-war new towns. Many homes date from the post-war decades, so bathrooms and kitchens may be on their second or third set of sealant. Sealant laid over old sealant never bonds properly, so it all has to come out.
For an older house near a landmark such as St Barnabas', walls and floors in older homes can move, and sealant and grout show it first. Managing a site like Pound Hill Infant Academy? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Pound Hill is about 2 miles north-east of Crawley, in West Sussex. Whether you are in the middle of Pound Hill or further out, remedial sealant is available for homes and businesses alike. Pound Hill is one of 371 places in West Sussex where we work.
Jobs for remedial sealant in RH10 is quoted and booked the same way as anywhere else. If you need remedial sealant at a property on Worth Road, Burns Road and Milton Road or anywhere close by, we can help. If you are just outside Pound Hill, we cover Worth (1 mile south), Three Bridges (1 mile south-west), Forge Wood (1 mile north), Maidenbower (1 mile south) and Copthorne (1 mile north-east). Larger places within reach include Horsham (8 miles south-west), Haywards Heath (9 miles south), Burgess Hill (11 miles south), East Grinstead (6 miles east), Broadfield (3 miles south-west) and Billingshurst (15 miles south-west).
Around Pound Hill
We work in homes and buildings around Hazelwick School, The Gatwick School and Hillside Inn. For rail, the closest station is Three Bridges station, about 0.6 miles south-west of the centre. Well-known places in the area include County Mall (1.7 miles west) and Langley Green Hospital (2 miles west). For a walk, there’s Tilgate Lake.
Common problems we fix in Pound Hill
All sealant wears out eventually. Mould grows into the silicone, the surface hardens and the bead shrinks, faster where ventilation is poor. Then the only fix is removal and a new bead.
Look out for any of the following:
- Sealant peeling off a dusty or damp surface
- Black mould underneath the bead
- Smears and lumps from a botched reseal
- A shower that leaks however often it’s resealed
For landlords with property near Three Bridges station, a joint that keeps failing is best fixed properly while the property is empty.
Comparing quotes
- Is the old sealant removed completely?
- How hidden problems are handled
- How the surfaces are prepared before sealing
- Is VAT in the price?
The process
All our tools and materials come with us in the van, so there’s nothing for you to buy. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes a few hours, depending on how many layers have to come out. In a smaller place like Pound Hill, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Clear the area around the work
- Mention any sign-in or site rules at work premises
Ask for a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.
Read more
Should I try it myself first?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.