Kent · England
Remedial Sealant in Pett Bottom
Our applicators work in Pett Bottom on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Caulk or the wrong sealant used in a wet area
- Torn expansion joints
- Over-sealed joints coming away
Remedial sealant in Pett Bottom
If a joint has been resealed and is leaking again, it’s worth a proper look. Send photos when you ring 0345 464 0079 or send us an email, along with when it was last resealed. Typical jobs include a second bead peeling off the first and mould trapped under a layer of silicone, on mouldy bath & shower sealant, expansion joints and shrunken worktop sealant.
For a small place like Pett Bottom, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
Your job is guaranteed for a year, as with all our work.

- Place
- Pett Bottom (CT4)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
When something else is needed
We will not take on work that will not last, so these are the limits:
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- Failed tanking or loose tiles behind the sealant
- A cracked shower tray or bath (that needs repair or replacing)
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think.
Joints and surfaces we work on
- Botched or over-sealed joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Expansion joints
- Leaking tray & enclosure joints
- Failed movement joints
Common questions in Pett Bottom
Can you help a landlord with a rental near Bekesbourne station?
Yes. We work for landlords and letting agents as well as homeowners. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear quote.
Will you come out to Pett Bottom?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we will explain our choice.
What do you need from me for a quote?
Only a few details: where it is, what you’ve noticed and how we reach it. Then phone 0345 464 0079 or drop us an email.
How long will it take to strip and reseal the joint?
Allow a few hours for a typical bath or shower, longer where several layers have been applied. You will know the timing when we quote.
Does remedial work come with a guarantee?
Yes. You get our 12-month guarantee, and we are fully insured.
Can you remove sealant that is been put over old sealant?
Yes. We cut out all the layers and clean off the film, then the joint is resealed once.
What happens if the problem is the tray or the plumbing?
You’ll hear it from us. A cracked tray, faulty valve or leaking waste needs a different trade, so we will not pretend it will.
How the job changes by surface
Leaking trays & enclosures
A cracked tray, failed valve or leaking waste needs a different fix. We will tell you what we find.
Mouldy bath & shower sealant
Mould often spreads under the bead as well as through it. We treat the exposed joint once the bead is out so the new sealant starts clean.
Do you need remedial sealant in Pett Bottom?
Products get mixed up: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. Each fails in its own way.
Any of these means the joints need attention:
- Leaks that keep coming back after resealing
- Sealant peeling off a dusty or damp surface
- Over-sealed joints coming away
- Decorators’ caulk around a bath or shower
If you live in an older home near Church of St Mary, older homes can move a little, which is hard on rigid grout and tired sealant.
Before you book anyone
- How the colour is chosen
- What the cure time is
- Is VAT in the price?
- How the joint is cleaned and prepared
Can I do it myself?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
How we quote for remedial sealant
For a quick quote, just ask. The main things that affect it are:
- When we can work, for business premises
- The size of the job
- Any mould that needs treating
- How much old sealant there is and how hard it is to remove
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or drop us an email.
Asking for a quote
What to tell us when you ask for a quote:
- The problem you’ve noticed
- Photos by email, if that’s easy
- Any access issues, like height or stairs
- Whether it has been sealed before
We do not publish a price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To arrange one, ring 0345 464 0079 or email us.
What we do, step by step
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes a few hours for most joints, depending on how much old sealant has to come out. In a small place like Pett Bottom, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by checking the joint for movement, leaks and the reason it failed.
- We strip the joint completely, removing any layers below.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
Preparing for the visit
- Mention any parking rules near the property
- Mention any tricky access
- Clear the area around the work
Getting a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Related advice
Pett Bottom homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Managing a site like Simon Langton Grammar School for Boys? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Rented homes near Bekesbourne station change hands often, and a joint that keeps failing is best fixed properly while the property is empty.
Pett Bottom is about 4 miles south of Canterbury, in Kent. For remedial sealant in and around Pett Bottom, please call 0345 464 0079 or drop us an email for a quick quote. We cover Kent from our Crawley base. Across Kent, we cover 922 places, and Pett Bottom is one of them. We also work in Chelmsford, around 44 miles away.
All of CT4 is within our area for remedial sealant. Remedial sealant is available to properties on Pett Bottom Road and School Lane. We also cover Lower Hardres (1 mile north-west), Upper Hardres (1 mile south-west), Street End (1 mile north-west), Lynsore Bottom (1 mile south) and Nackington (2 miles north). Further out, we also cover Ashford (12 miles south-west), Canterbury (4 miles north), Dover (11 miles south-east), Folkestone (10 miles south), Whitstable (9 miles north) and Deal (13 miles east).
Around Pett Bottom
We work in homes and buildings around The Duck pub, among other places. The closest station to Pett Bottom is Bekesbourne station, roughly 3 miles north-east of the centre. Other landmarks nearby include Canterbury Castle (3.4 miles north) and Rupert Bear Museum (3.5 miles north).
Also near Pett Bottom
What else we do in Pett Bottom
Work for landlords, hotels and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can be quoted together.
