Hampshire · England
Remedial sealant & repairs in Middleton, Hampshire
Failed sealant joints in Middleton need attention? We remove the old material, prepare the joints and seal them properly.
- A shower that leaks however often it’s resealed
- Sealant that came away because the surface wasn’t prepared
- Smears and lumps from a botched reseal
Bathrooms and kitchens in Middleton
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For site and facilities teams at buildings such as Longparish Church of England Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Letting a property close to Whitchurch (Hampshire) station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. For an older house near a landmark such as Church of St Nicholas, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Middleton is about 4 miles east of Andover, in Hampshire. Jobs in Middleton get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. 683 places in Hampshire are on our list. You can also see our page for Southampton, about 19 miles away.
We work across SP11 for remedial sealant and the streets around it. We also cover the places around Middleton: Longparish (1 mile east), Barton Stacey (2 miles south-east), Egypt (3 miles south-east), Sutton Scotney (4 miles south-east) and Hunton (4 miles south-east). Larger places within reach include Basingstoke (13 miles east), Winchester (10 miles south), Andover (4 miles west), Chandler's Ford (14 miles south), Romsey (14 miles south) and Tadley (15 miles north-east).
Landmarks near Middleton
We work in homes and buildings around The Plough Inn. For rail, the closest station is Whitchurch (Hampshire) station, about 3.7 miles north-east of the centre. Other landmarks nearby include Andover War Memorial Hospital (4.8 miles west) and Finkley Down Farm Museum (3.4 miles north-west). Green spaces nearby include Anton Lakes and Mill Lake.
Remedial sealant for homes and businesses in Middleton
Two decades of sealant work means we recognise most failures quickly. We are fully insured ARBOMaster approved applicators, and remedial work carries our 12-month guarantee. We work on mouldy bath & shower sealant, failed movement joints and botched or over-sealed joints, and people most often call us about dark patches showing through the sealant and caulk or the wrong sealant used in a wet area.
Around Middleton, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
Your job is guaranteed for a year, as with all our work.
- Location
- Middleton (SP11)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Places near Middleton
Other services in Middleton
Leave it or put it right?
Adding more sealant is the usual quick fix, and it rarely works. It doesn’t grip the old layer, leaving the leak in place and one more layer to cut out later. Where a wall is exposed, as many are in small places like Middleton, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or send us an email and we will talk you through it.
Why Middleton clients choose us
- Sealant colour chosen to suit
- Any old sealant cut out fully, not covered over
- Approved under the ARBOMaster scheme
- Experience in homes, commercial sites and hotels
Read our cost guide or what customers say.
For landlords and businesses
Landlords and letting agents in Middleton can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
Different surfaces, different methods
Leaking trays & enclosures
When failed joints are the cause, they’re all cut out and renewed, tray edges and screen profiles included.
Worktops & kitchens
Kitchen joints often have grease and cleaning residue deep in them, so cleaning takes longer than in a bathroom.
FAQs for Middleton
Is Middleton in your area for remedial sealant?
Yes. Our work covers London and the South East, and Middleton is part of that. Just ring 0345 464 0079 or email us with a few details of the job, and we will give you a clear price.
I let a flat near Whitchurch (Hampshire) station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we’ll send you a clear quote.
Can you reseal a split movement joint?
Yes. We cut out the failed sealant, fit backing and reseal with a flexible product.
What if the leak isn’t the sealant?
We will tell you. A cracked tray, faulty valve or leaking waste needs a different trade, and we will not reseal for the sake of it.
Do the sealants smell?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
How long will it take to strip and reseal the joint?
Longer than a simple reseal, because every layer has to come out. For most joints, it’s a few hours.
How much does remedial sealant cost in Middleton?
It depends on the job, so we quote each one individually. For a quick quote, ring 0345 464 0079 or drop us an email with a short description of the job.
Can I add another job to the visit?
Yes. Just list everything you need and we will quote it together.
How we quote for remedial sealant
Every job gets its own quote. These are the things that affect it:
- Which sealant suits the joint
- Working hours on commercial sites
- The number and length of the joints
- Access and height
Doing several joints on one visit is generally more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
What we need to know
When you call or email, it’s useful to know:
- Access, such as stairs, a lift or height
- Where the job is, and your postcode
- Pictures of the joints, sent by email
- Whether it has been sealed before
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved.
How the visit works
There’s no need to move everything out before we come, just the space around the work. We protect the rest, and the work takes a few hours for a typical bath or shower, longer where several layers have been applied in most cases. Somewhere as small as Middleton, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we find out how and where the joint has failed.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- Moving joints get backing and a flexible sealant to suit.
- We tool the joint and tell you about anything else that needs attention.
Getting ready for the visit
- Clear the area around the work
- Mention any leaks or damp you’ve noticed
- Tell us if parking is tricky
How to get a quote
We do not publish a price list. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or email us.
Read more
When it isn’t the sealant
Sealant is not the answer to every problem, and we’d rather say so up front. It won’t solve:
- A bath, tray or worktop that moves until it’s properly fixed
- Water damage behind tiles that needs a tiler
- A cracked shower tray or bath (that needs repair or replacing)
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly.
Surfaces we seal
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Failed movement joints
- Expansion joints
- Botched or over-sealed joints
- Shrunken worktop sealant
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.