Hampshire · England
Remedial sealant & repairs in Little London, Hampshire
Removing failed, mouldy or leaking sealant and putting it right in Little London, with a one-year guarantee on every job. Ask us for a quote.
- Products that weren’t meant for the joint
- Floor or wall movement joints that have failed
- Over-sealed joints coming away
What affects the quote in Little London
We do not publish a price list. What we look at:
- Working hours on commercial sites
- The size of the job
- How many rooms, windows or areas are involved
- Whether the work is at height
Doing several joints on one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.
What we need to know
To make quoting easier, let us know:
- What the problem is, such as mould, gaps, leaks or cracking
- Pictures of the joints, sent by email
- Any previous sealing or DIY work
- How many joints, rooms or windows are involved
Every job is quoted individually, so the first step is telling us about yours. Just call 0345 464 0079 or send us an email with the details.
How we handle remedial sealant in Little London
Two decades of sealant work means we recognise most failures quickly. We are ARBOMaster approved and fully insured, and remedial work carries our one-year guarantee. If you have dark patches showing through the sealant and a second bead peeling off the first, we can put it right.
Around Little London, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
Each job carries a 12-month guarantee, whatever its size.
- Where
- Little London (RG26)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Places near Little London
More services for Little London
Your questions about remedial sealant in Little London
Can you do remedial sealant in Little London?
Yes. Our work covers London and the South East, and Little London is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear quote.
Do you cover smaller places like Little London?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
What if resealing will not fix my leak?
We will tell you. If it’s a cracked tray, a failed valve or a leaking waste, resealing will not fix it, and we will not reseal for the sake of it.
Can failed expansion joints be resealed?
Yes. Backing sets the depth and stops the sealant sticking to the back.
Can I do it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Do you work for landlords and businesses?
Yes, regularly. We can quote for several properties at once.
What do you need from me for a quote?
Just the basics: where it is, what you’ve noticed and how we reach it. Then call 0345 464 0079 or drop us an email.
Do I need to be at home?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
What we can’t put right
New sealant can’t fix everything, and we’d rather say so up front. It will not solve:
- A tray or bath that is cracked
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- Tiles that have come away from the wall
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think before booking.
Joints and surfaces we work on
- Leaking tray & enclosure joints
- Expansion joints
- Botched or over-sealed joints
- Failed movement joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
The process
Good joint work is mostly preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes a few hours for most joints, depending on how much old sealant has to come out. For a village or hamlet like Little London, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at how the sealant has failed and check for movement or a leak path.
- Every layer of old sealant is cut and cleaned out.
- We clean the joint, treat any mould and let it dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- We tool the joint and tell you about anything else that needs attention.
Before we arrive
- Try not to wet indoor joints just before the visit
- Tell us about any water getting in
- On commercial sites, let us know about site rules
Getting a quote
To get a quote, ring 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Related advice
Keeping the joints in good condition
So the new joints stay in good condition:
- Use a soft cloth, not a scourer, on silicone
- Have loose fittings fixed before resealing
- Keep the room well ventilated
- Look for stains below bathrooms now and then
Do not let anyone seal over it later. Over-sealing is how many remedial jobs start, so the old bead should always come out first.
Signs to act on: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Each one is worth getting looked at.
Landlord and commercial work in Little London
Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Remedial sealant around Little London
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Saint Stephen's Church, older homes can move a little, which is hard on rigid grout and tired sealant. Rented homes near Bramley (Hants) station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants.
Little London is about 2 miles south-east of Tadley, in Hampshire. If you need remedial sealant in Little London, please phone 0345 464 0079 or email us for a quick quote. We cover Hampshire from our Crawley base. Across Hampshire, we cover 683 places, Little London among them. For nearby work, see our Reading page (10 miles or so).
Here we cover the RG26 postcode area for remedial sealant. You will find streets such as Silchester Road and New Road, all of which we cover. Other places close to Little London include Pamber Green (1 mile west), Pamber End (1 mile south-west), Salters Heath (1 mile south-west), Silchester (2 miles north) and Pamber Heath (2 miles north). We also work in nearby towns such as Basingstoke (5 miles south), Farnborough (15 miles east), Fleet (12 miles east), Alton (14 miles south-east), Yateley (12 miles east) and Hook (7 miles south-east).
Around Little London
In Little London, that means homes and buildings near The Queens College Arms, among other places. The closest station to Little London is Bramley (Hants) station, about 2.1 miles east of the centre. Well-known places in the area include Calleva Museum (1.7 miles north) and Basing House (5 miles south-east). Green spaces nearby include Daneshill Park Woods.
What happens if it’s left?
Another bead over the top won’t fix a failed joint. It does not grip the old layer, leaving the leak in place and one more layer to cut out later. Around Little London, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we will go through it with you.
What you get with us
- Every job guaranteed for a year
- Colour picked to suit the job
- Anti-fungal silicone where joints get wet
- Over 20 years’ experience
See what affects the cost or our reviews.