Hampshire · England
Remedial sealant & repairs in Lane End, Hampshire
Our applicators work in Lane End on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- Sealant applied over old sealant that has lifted
- Sealant that came away because the surface wasn’t prepared
- Torn expansion joints
Remedial sealant for homes and businesses in Lane End
Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, without scratching tiles, trays or frames. New sealant only bonds to a clean, dry joint. If you have torn expansion joints and products that weren’t meant for the joint, we can put it right, whatever the surface.
Around Lane End, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Place
- Lane End (SO21)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Landlord and commercial work in Lane End
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will give you a quote.
Landlords and letting agents in Lane End can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
Bathrooms and kitchens in Lane End
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
In and around Lane End, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
Lane End is about 5 miles south-east of Winchester, in Hampshire. For remedial sealant in and around Lane End, please phone 0345 464 0079 or email us for a quick quote. We cover Hampshire from our Crawley base, Lane End included. Lane End is one of 683 places in Hampshire we cover for remedial sealant. We also work in Southampton, about 11 miles from Lane End.
Jobs for remedial sealant in SO21 works the same way as everywhere else we cover. We also cover the places around Lane End: Baybridge (2 miles south-west), Owslebury Bottom (3 miles west), Temple Valley (3 miles north-west), Owslebury (3 miles south-west) and Morestead (3 miles west). Within a short drive, we also cover Winchester (5 miles north-west), Havant (15 miles south-east), Eastleigh (7 miles south-west), Fareham (12 miles south), Horndean (12 miles south-east) and Totton (15 miles south-west).
What’s near Lane End
Other landmarks nearby include Wolvesey Castle (4.9 miles north-west) and St John's Rooms And Chapel (5 miles north-west). Open spaces near Lane End include Hockley Meadows and Twyford Down.
Towns and villages near Lane End
More services for Lane End
When it isn’t the sealant
Some problems need a builder, plumber or other trade rather than us:
- A tray or worktop that needs refixing first
- A tray or bath that is cracked
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think.
What we seal
- Leaking tray & enclosure joints
- Expansion joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Shrunken worktop sealant
- Failed movement joints
Lane End questions
Is Lane End in your area for remedial sealant?
Yes, Lane End is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear quote.
What guarantee comes with remedial sealant in Lane End?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Do you remove the old sealant?
Yes, every time. New silicone does not stick to old silicone, so the joint is cleaned back first.
What do you need from me for a quote?
A short description and the location, plus pictures if you have them. We will ask anything else we need to know.
Do you have insurance?
Yes. We are fully insured.
What sealant do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
Do you work for letting agents?
Yes, regularly. Several properties can be quoted together.
Can tenants book the work?
We are happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
What we do, step by step
A visit follows a simple pattern: we look at the joints together, protect the area around them, carry out the job and tidy away. Most jobs take a few hours, depending on how many layers have to come out. In a small place like Lane End, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
Preparing for the visit
- Clear the area around the work
- Mention if the joints have been sealed before
- On commercial sites, let us know about site rules
Ask for a quote
For a quote, ring 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.
Related advice
How to look after the new joints
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Ask why a joint failed before redoing it
- Have loose fittings fixed before resealing
- Never fill a movement joint with mortar or grout
- Run the fan after every shower
Leave the new joint to cure fully before it gets wet or moves: follow the cure time we give you.
Movement joints that have split let water into the structure, and left long enough, the edges of the joint can crumble. Resealing while the edges are sound is simpler.
When to call us in Lane End
Movement tears sealant that isn’t designed for it. Flexing baths, rocking trays and building movement joints split any bead that’s too stiff or too thin.
Any of these means the joints need attention:
- Dark patches showing through the sealant
- Sealant peeling off a dusty or damp surface
- A second bead peeling off the first
- Thick, messy sealant smeared over tiles
Whether the job is in Lane End itself or nearby, the right material for each joint matters as much as a neat finish.
Comparing quotes
- The length of the guarantee
- What preparation is included
- Whether all the old sealant comes out first
- How much experience the applicator has
Quotes for remedial sealant in Lane End
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The type of sealant required
- The number and length of the joints
- Whether there’s mould to deal with
- How many rooms, windows or areas are involved
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
What we need to know
Photos help, but a description is a good start. Please mention:
- The rough size of the job
- Access, such as stairs, a lift or height
- Where the property is
- What’s wrong with the joints now
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, call 0345 464 0079 or send us an email.
Surface by surface
Mouldy bath & shower sealant
Repeat mould generally points to a damp, poorly aired room. We’ll reseal and tell you if extraction looks to be the issue.
Windows & doors
Wrong-coloured or messy mastic can be replaced for appearance too, in a colour that suits the frame.