Essex · England
Kirby Cross Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right in Kirby Cross, with a one-year guarantee on every job. Ask us for a quote.
- Floor or wall movement joints that have failed
- Leaks that keep coming back after resealing
- Caulk or the wrong sealant used in a wet area
Do you need remedial sealant in Kirby Cross?
Sealant needs a clean, dry surface with no grease on it. Residue, moisture or dust left in the joint weaken the bond, so it starts lifting sooner than it should.
The most common problems we see are:
- Products that weren’t meant for the joint
- Beads that never stuck properly
- Leaks that keep coming back after resealing
- Worktop sealant that has shrunk and split
Schools such as Frinton-on-Sea Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Before booking anyone
- The length of the guarantee
- When the joint can take water or movement
- How the surfaces are prepared before sealing
- Is VAT in the price?
Remedial sealant in Kirby Cross
The wrong product in the wrong joint fails however neatly it’s applied. Out it comes, and in goes a sealant suited to the job. If you have decorators’ caulk around a bath or shower and thick, messy sealant smeared over tiles, we can put it right.
Homes around Kirby Cross range from older cottages to more recent houses. In older homes, walls and floors can move a little more, so the right flexible sealant matters.
There’s a 12-month guarantee on every job.
- Where
- Kirby Cross (CO13)
- Region
- Essex
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
The process
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a few hours for a typical bath or shower, longer where several layers have been applied. For a job in Kirby Cross, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We start by checking the joint for movement, leaks and the reason it failed.
- All the old sealant comes out, including any layers underneath.
- Next, any mould is treated and the joint dried.
- We use the right backing and sealant for any joint that moves.
- We tool the joint and tell you about anything else that needs attention.
Before we arrive
- Mention any sign-in or site rules at work premises
- Tell us about any water getting in
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.
Read more
Work for landlords, hotels and businesses
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
Aftercare tips
Joint life depends on how it’s used and looked after. We suggest:
- Look for stains below bathrooms now and then
- Do not wait for a small gap to become a leak
- Do not add new sealant on top of old
- Run the fan after every shower
If we have found a cause, such as a loose tray or a leaking waste, get it fixed, because the new sealant can’t hold back a problem underneath.
If a joint has failed more than once, stop resealing it. Get the cause found first, otherwise the next attempt will fail too.
What happens if it’s left?
Repeat failures have a cause. Taking time to find the cause, whether it’s movement, a leak or the wrong product, is what stops it happening again. Around Kirby Cross, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, ring 0345 464 0079 or email us and we will give you an honest view and a quote.
Why Kirby Cross customers choose us
- We’re fully insured
- Colour picked to suit the job
- Quality sealants from Arbo and Everbuild
- Tidy, careful work
Read what affects the cost or our reviews.
Can I do it myself?
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Bathrooms and kitchens in Kirby Cross
Kirby Cross is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Frinton-On-Sea station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants. For an older house near a landmark such as St Mary Magdalene, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Kirby Cross is about 5 miles north-east of Clacton-on-Sea, in Essex. From the centre of Kirby Cross to the outskirts, remedial sealant is available for homes and businesses alike. Across Essex, we cover 644 places, and Kirby Cross is one of them. There’s also a page for Chelmsford, about 33 miles away.
Here we cover the CO13 postcode area for remedial sealant. Remedial sealant is available to properties on Turpins Lane, Hunt Way and Stubbs Close. If you’re just outside Kirby Cross, we cover Frinton-on-Sea (1 mile south-east), Kirby-le-Soken (1 mile north-west), Walton-on-the-Naze (1 mile east), Great Holland (1 mile south-west) and Lane End (2 miles north-west). Within a short drive, we also cover Colchester (15 miles west), Clacton-on-Sea (5 miles south-west), Harwich (6 miles north), Greenstead (13 miles west), Wivenhoe (12 miles west) and Brightlingsea (9 miles west).
What’s near Kirby Cross
In Kirby Cross, that means homes and buildings near The Ship pub, Frinton Park and Tendring Technology College, among other places. There’s a railway station in Kirby Cross itself: Frinton-On-Sea station. The countryside around Kirby Cross includes Great Holland Pits.
Also near Kirby Cross
Other services in Kirby Cross
Your questions about remedial sealant in Kirby Cross
Is Kirby Cross in your area for remedial sealant?
Yes, Kirby Cross is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.
Will you come out to Kirby Cross?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for letting agents?
Yes, we do. We work in homes, commercial premises and hotels, and we’re fully insured.
Do the sealants smell?
There can be a smell while the sealant cures. Opening a window helps.
What does remedial sealant cost?
It depends on the job, so we quote each one individually. For a quick quote, phone 0345 464 0079 or email us with a short description of the job.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in.
How long should I leave it?
Cure times vary by product. We tell you how long to leave it before we go.
Do you offer different sealant colours?
In most cases you can choose. We will tell you which colours the right product comes in.
When it isn’t the sealant
A few problems are outside what sealant work can do:
- A bath, tray or worktop that moves until it’s properly fixed
- A leaking trap, valve or supply pipe
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
If you are not sure, just phone 0345 464 0079 or email us and we will give you a straight answer before you book.
Where we work in Kirby Cross
- Leaking tray & enclosure joints
- Expansion joints
- Mouldy bath & shower sealant
- Failed movement joints
- Botched or over-sealed joints
- Shrunken worktop sealant