Essex · England

Remedial sealant & repairs in Frinton-on-Sea, Essex

Remedial sealant across Frinton-on-Sea and nearby, with old sealant always removed completely and a one-year guarantee.

  • Mould trapped under a layer of silicone
  • Gaps opening along the back of the worktop
  • A shower that leaks however often it’s resealed

Need remedial sealant in Frinton-on-Sea?

When to call us in Frinton-on-Sea

Silicone only bonds to surfaces that are clean and dry. Residue, moisture or dust left in the joint weaken the bond, and the joint starts to come away early.

Most people get in touch when they notice something like this:

  • Wide, uneven beads that look worse than the old ones
  • Leaks that keep coming back after resealing
  • Sealant that came away because the surface wasn’t prepared
  • Caulk or the wrong sealant used in a wet area

Schools such as Frinton Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

Before you book anyone

  • How the surfaces are prepared before sealing
  • Whether all the old sealant comes out first
  • The length of the guarantee
  • What the cure time is

Our hiring checklist

Remedial sealant in Frinton-on-Sea, done properly

A joint that keeps letting you down needs more than another bead. It helps to have pictures when you ring 0345 464 0079 or drop us an email. We work on expansion joints, leaking tray & enclosure joints and mouldy bath & shower sealant, and the jobs we see most are over-sealed joints coming away and products that weren’t meant for the joint.

In and around Frinton-on-Sea, older properties sit alongside newer ones. Older homes can move a little with the seasons, which is hard on tired sealant and rigid grout.

We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.

Location
Frinton-on-Sea (CO13, CO14)
Wider area
Essex
Cover
A year, on every job
Quote
Quoted before any work starts
Phone
0345 464 0079
Page updated
26 October 2026
Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles

Bathrooms and kitchens in Frinton-on-Sea

Frinton-on-Sea is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.

For an older house near a landmark such as St Mary Magdalene, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you let a flat or house near Frinton-On-Sea station, botched sealant from a previous quick fix is easier to strip out between tenants.

Frinton-on-Sea is about 5 miles north-east of Clacton-on-Sea, in Essex. Every kind of property in Frinton-on-Sea can book us for remedial sealant, old or new, large or small. The work is guaranteed for a year. 644 places in Essex are on our list, large and small. You can also see our page for Chelmsford, about 33 miles away.

Jobs for remedial sealant in CO13 and CO14 works the same way as everywhere else we cover. Whether your property is on Glebe Way, Greenway and Pole Barn Lane or a nearby road, we can help. With the B1033 and B1336 close by, Frinton-on-Sea is simple for us to get to for remedial sealant. Nearby, we also carry out remedial sealant in Kirby Cross (1 mile north-west), Walton-on-the-Naze (1 mile north-east), Kirby-le-Soken (1 mile north-west), Great Holland (2 miles west) and Lane End (2 miles north-west). We also work in nearby towns such as Colchester (15 miles west), Clacton-on-Sea (5 miles south-west), Harwich (7 miles north), Greenstead (14 miles west), Wivenhoe (12 miles west) and Brightlingsea (10 miles west).

What’s near Frinton-on-Sea

In Frinton-on-Sea, that means homes and buildings near The Lock and Barrel pub, Tendring Technology College and Frinton Park and the streets around them. Frinton-on-Sea has its own railway station: Frinton-On-Sea station. Green spaces nearby include Great Holland Pits.

Map of Frinton-on-Sea © OpenStreetMap contributors

Surface by surface

Leaking trays & enclosures

If the tray is cracked, or the leak is from the valve or waste, sealant will not fix it. We will tell you what we find.

Movement & expansion joints

Some movement joints have been filled with mortar or grout. We rake that out where it can be removed and seal with a flexible product.

When something else is needed

Before booking, it’s worth knowing the limits:

  • Older mastics that may need an asbestos check before removal
  • Leaks from a shower valve, waste or pipework (a plumber’s job)
  • Tiles that have come away from the wall

If in doubt, call 0345 464 0079 or email us and we will say what we think before you book.

Where we work in Frinton-on-Sea

  • Botched or over-sealed joints
  • Leaking tray & enclosure joints
  • Mouldy bath & shower sealant
  • Failed movement joints
  • Expansion joints
  • Shrunken worktop sealant

How it works

The work is kept neat and contained to the joints we’re treating, so you can get on with your day. Expect the work to take a few hours for a typical bath or shower, longer where several layers have been applied, and we tell you how long to leave it before we go. Parking around Frinton-on-Sea is generally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.

  1. We protect the surfaces around the joint.
  2. The botched or failed sealant is cut away completely.
  3. We clean and degrease the joint and look for signs of movement or water.
  4. New sealant goes in once the joint is dry, and is tooled smooth.
  5. We give you the cure time and explain what caused the failure.

Preparing for the visit

  • Let us know about parking restrictions
  • Let us know if you’ve seen damp or leaks
  • Tell us about any previous sealing or DIY attempts

Ask for a quote

We quote each job on its own, so start by telling us what you need. Simply call 0345 464 0079 or send us an email and describe the job.

Get a quick quote

Read more

Frinton-on-Sea questions

Is Frinton-on-Sea within the area you cover?

Yes, Frinton-on-Sea is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Do you work for landlords with property near Frinton-On-Sea station?

Yes, rental work is part of what we do. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear price.

Will it make a mess?

We keep the work tidy. We protect what’s around the joints, and we clear up when we are done.

Are you an approved applicator?

Yes. We hold ARBOMaster approved applicator status.

How long should I leave it?

That depends on the sealant used, so follow the cure time we give you.

Should I try DIY first?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.

Are you fully insured?

Yes. We’re fully insured.

What do you need from me for a quote?

Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply ring 0345 464 0079 or drop us an email.

Why deal with it now?

Repeat failures have a cause. Taking time to find the cause, whether it’s movement, a leak or the wrong product, is what stops it happening again. Homes in smaller places like Frinton-on-Sea can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.

The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.

Why choose Mr Mastic in Frinton-on-Sea

  • Every job guaranteed for a year
  • Tidy, careful work
  • Rated 4.9 stars on Google
  • Trusted Arbo and Everbuild sealants

See how sealant jobs are priced or our reviews.

Looking after it afterwards

Good habits help new joints last longer. A few tips:

  • Deal with small splits early
  • Look for stains below bathrooms now and then
  • Find out why the sealant failed first
  • Keep the room well ventilated

Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.

A failing joint rarely gets better on its own. Each use pushes more water behind the bead, into floors, walls or ceilings. Sorting it early limits the damage.

Quotes for remedial sealant in Frinton-on-Sea

We don’t publish a price list, because jobs vary so much. What we look at:

  • How many areas need sealing
  • The old material and how stubborn it is
  • The size of the job
  • Working hours on commercial sites

Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you’re not sure whether it needs doing, call 0345 464 0079 or drop us an email and we will give you an honest view and a quote.

What to tell us for a quote

What to tell us when you ask for a quote:

  • Where the job is, and your postcode
  • Roughly how big the job is
  • What’s wrong with the joints now
  • Whether it’s a home or a business

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that’s easy.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job