Medway · England

Remedial sealant & repairs in Kingsnorth, Medway

Removing failed, mouldy or leaking sealant and putting it right for Kingsnorth, backed by a one-year guarantee. Ask us for a quote.

  • Movement joints that have split or pulled away
  • Decorators’ caulk around a bath or shower
  • Worktop sealant that has shrunk and split

Remedial sealant near Kingsnorth

What we can’t put right

A few problems are outside what sealant work can do:

  • A tray or worktop that needs refixing first
  • A leaking trap, valve or supply pipe
  • A cracked shower tray or bath (that needs repair or replacing)

If in doubt, ring 0345 464 0079 or email us and we’ll say what we think.

Joints and surfaces we work on

  • Botched or over-sealed joints
  • Expansion joints
  • Leaking tray & enclosure joints
  • Shrunken worktop sealant
  • Mouldy bath & shower sealant
  • Failed movement joints

About our remedial sealant in Kingsnorth

Not every leak is a sealant leak. Cracked trays, leaking wastes and faulty valves often look like a sealant problem. When the fault is elsewhere, we say so instead of resealing for the sake of it. If you have beads that never stuck properly and black mould underneath the bead, we can put it right, whatever the surface.

Somewhere as small as Kingsnorth, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.

Your job is guaranteed for a year, as with all our work.

Fresh white silicone going into the corner where a shower screen meets the tiled wall
Location
Kingsnorth (ME3)
Wider area
Medway
Cover
A year, on every job
Quotes
A clear price before any work starts
Telephone
0345 464 0079
Last updated
26 October 2026

DIY sealant or a professional job?

If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.

Leave it or put it right?

Stripping out botched sealant adds time to a reseal, but rarely a lot: the work takes a few hours, depending on how many layers have to come out. It’s far less disruption than resealing the same joint again and again. In a small place like Kingsnorth, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, ring 0345 464 0079 or drop us an email and we will give you an honest view and a quote.

Why Kingsnorth clients choose us

  • We leave the area clean and tidy
  • 20+ years of sealant experience
  • We agree the colour with you first
  • A sealant colour to suit the surroundings

See what affects the cost and what customers say.

When to call us in Kingsnorth

Water from somewhere else can ruin a good seal. A leaking valve, a failed waste or cracked grout feeds water behind the bead, and the sealant lifts or goes mouldy from underneath.

Keep an eye out for any of the following:

  • Smears and lumps from a botched reseal
  • Gaps opening along the back of the worktop
  • Repeat leaks from the same joint
  • Beads that never stuck properly

Letting a property close to Gillingham (Kent) station? Then botched sealant from a previous quick fix is easier to strip out between tenants.

Questions to ask before booking

  • Is the old sealant removed completely?
  • What product goes in the joint
  • How hidden problems are handled
  • Which colour the sealant will be

How to choose a mastic man

Aftercare tips

Aftercare is simple:

  • Do not add new sealant on top of old
  • Never fill a movement joint with mortar or grout
  • Keep the room well ventilated
  • Do not wait for a small gap to become a leak

Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.

Signs to act on: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Any of them means it’s time for remedial work.

Your questions about remedial sealant in Kingsnorth

Do you cover Kingsnorth for remedial sealant?

Yes, Kingsnorth is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or email us and let us know what needs doing.

I let a flat near Gillingham (Kent) station. Can you help?

Yes, rental work is part of what we do. You can ring 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.

Is it messy?

We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.

Do I have to be there?

It depends on the job. For work indoors, someone needs to let us in.

How long should I leave it?

It depends on the product and the temperature. We tell you how long to leave it before we go.

Will the old sealant be removed?

Yes, every time. New sealant will not bond properly to old, so the joint is cleaned back first.

What sealant do you use?

It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.

Is remedial work guaranteed?

Yes. Our one-year guarantee covers the work, and we’re fully insured.

Surface by surface

Leaking trays & enclosures

When failed joints are the cause, they’re all cut out and renewed, including the screen profile and tray edges.

Movement & expansion joints

Bonding on three sides is a common reason movement joints tear. Backing rod or bond-breaker tape prevents it, so the sealant grips the two sides only.

Remedial sealant in Kingsnorth: local notes

Kingsnorth is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

If you look after a building such as The Hundred of Hoo Academy, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Kingsnorth is about 4 miles north of Gillingham, in Medway. Across the ME3 area, we cover remedial sealant for homes and businesses. Kingsnorth is one of 68 places in Medway we cover. Chelmsford is on our list too, around 22 miles away.

All of ME3 is within our area for remedial sealant. Streets in the area include Jetty Road and Jacob's Lane, and we cover them all. Close by, we work in Tunbridge Hill (1 mile north), Sharnal Street (1 mile north-west), Fenn Street (1 mile north-west), Hoo St Werburgh (2 miles west) and High Halstow (2 miles north-west). Larger places within reach include Gillingham (4 miles south), Chatham (6 miles south-west), Rochester (5 miles south-west), Rainham (5 miles south), Strood (6 miles south-west) and Luton (5 miles south-west).

Near you in Kingsnorth

Kingsnorth’s nearest station is Gillingham (Kent) station, roughly 3.6 miles south-west of the centre. Nearby you will also find Medway Maritime Hospital (4.2 miles south-west) and Upnor Castle (3.5 miles south-west). The countryside around Kingsnorth includes Bishop Saltings.

Map of Kingsnorth © OpenStreetMap contributors

What we do, step by step

Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, do the work and clear up. It generally takes a few hours, depending on how many layers have to come out. Somewhere like Kingsnorth needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. First we work out whether the problem is the sealant, movement or a leak.
  2. Old beads and residue are removed down to clean surfaces.
  3. We treat any mould and dry the joint thoroughly.
  4. The right product goes in, with backing where the joint moves.
  5. The joint is tooled and you are told about anything else we found.

Preparing for the visit

  • Try not to wet indoor joints just before the visit
  • Mention any tricky access
  • Tell us about any previous sealing or DIY attempts

Get a quote

We do not publish a price list. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or email us.

Ask for a quote

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job