Hampshire · England

Remedial sealant & repairs in Holybourne, Hampshire

We cover Holybourne for removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.

  • Kitchen joints letting water behind the worktop
  • Wide, uneven beads that look worse than the old ones
  • Sealant applied over old sealant that has lifted

Remedial sealant near Holybourne

Quotes for remedial sealant in Holybourne

We quote each job individually. This is what makes a difference:

  • The type of sealant required
  • Any working-time requirements on site
  • The old material and how stubborn it is
  • Whether the work is at height

There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.

What we need to know

What to tell us when you ask for a quote:

  • The type of property
  • How many joints, rooms or windows are involved
  • The problem you’ve noticed
  • How we’d reach the joints

For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we will explain what’s involved before giving you a price.

About our remedial sealant in Holybourne

Movement and expansion joints fail when the sealant can’t stretch. The old sealant comes out and backing goes in to control the depth, before resealing with a flexible product suited to the movement. If you have worktop sealant that has shrunk and split and caulk or the wrong sealant used in a wet area, we can put it right, whatever the surface.

Homes around Holybourne are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.

All our work comes with our one-year guarantee.

Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles
Where
Holybourne (GU34)
Region
Hampshire
Guarantee
A year, on every job
Quotes
Quoted before any work starts
Call
0345 464 0079
Last updated
26 October 2026

Aftercare tips

Simple care keeps the joints in good condition. We recommend:

  • Check trays and worktops don’t move
  • Keep bleach and abrasives off the bead
  • Deal with small splits early
  • Always have old sealant cut out, not covered

Watch the joint over the first few weeks, especially if movement was the problem. If anything changes, just ring 0345 464 0079 or send us an email.

If a joint has failed more than once, stop resealing it. Have someone find out why, or the next bead will go the same way.

FAQs for Holybourne

Do you cover smaller places like Holybourne?

Yes, Holybourne is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Do you work in hotels near Holybourne?

Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.

Can tenants book the work?

We can work for tenants, landlords or agents. Just make sure your landlord agrees.

Can you quote for more than one area?

Yes. Tell us about everything you’d like done and we’ll quote it together.

Can you take off two layers of silicone?

Yes. We remove every layer; over-sealing fails because silicone won’t bond to silicone.

Where are you based?

Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.

What if resealing won’t fix my leak?

You’ll hear it from us. A cracked tray, faulty valve or leaking waste needs a different trade, so we won’t pretend it will.

Do I have to be there?

For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you do not need to watch us work.

Surface by surface

Over-sealed & botched joints

Every layer has to come out, and silicone residue is cleaned off the tiles too. Only a clean joint will take a new bead.

Movement & expansion joints

Bonding on three sides is a common reason movement joints tear. Backing rod or bond-breaker tape prevents it, letting the sealant flex between the two faces.

What sealant work can’t fix

Sealant isn’t the answer to every problem, and we’d rather say so up front. It will not solve:

  • Leaks from a shower valve, waste or pipework (a plumber’s job)
  • Sealant in an older building that needs testing for asbestos first
  • Failed tanking or loose tiles behind the sealant

Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly.

Joints and surfaces we work on

  • Botched or over-sealed joints
  • Expansion joints
  • Shrunken worktop sealant
  • Mouldy bath & shower sealant
  • Leaking tray & enclosure joints
  • Failed movement joints

What happens if it’s left?

Leaks that are left keep doing damage out of sight: wet floors, stained ceilings and swollen worktops. Dealing with the joint now is a small job by comparison. Around Holybourne, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we will go through it with you.

Why book with us

  • Approved under the ARBOMaster scheme
  • Old sealant always removed completely
  • Domestic, commercial and hotel work
  • White, clear, grey or another colour, product permitting

Take a look at our cost guide or what customers say.

Remedial sealant around Holybourne

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings. There are hotels and other places to stay in and around Holybourne. Hotel bathrooms are part of our work as well as homes, and can be done room by room.

Managing a site like Andrews' Endowed Church of England Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes. If you let a flat or house near Alton station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. If you live in an older home near Holy Rood Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

Holybourne is about 2 miles north-east of Alton, in Hampshire. For remedial sealant in and around Holybourne, please call 0345 464 0079 or send us an email for a quick quote. We cover Hampshire from our Crawley base, Holybourne included. Holybourne is one of 683 places in Hampshire where we work. For nearby work, see our Reading page.

We cover every part of the GU34 postcode area for remedial sealant. Local streets include London Road, Carpenters Close and Inhams Road, all of which we cover. Nearby, we also carry out remedial sealant in Neatham (1 mile south-east), Alton (2 miles south-west), Upper Froyle (2 miles north-east), Wyck (2 miles south-east) and East Worldham (2 miles south). Within a short drive, we also cover Basingstoke (10 miles north-west), Farnborough (12 miles north-east), Fleet (9 miles north-east), Aldershot (10 miles north-east), Petersfield (11 miles south) and Yateley (13 miles north).

Around Holybourne

Typical jobs here are in homes near White Hart pub, Eggar's School and Treloar School. The closest station to Holybourne is Alton station, roughly 1.2 miles south-west of the centre. A little further out are Alton Community Hospital (2.4 miles south-west) and Allen Gallery (1.5 miles south-west). Green spaces nearby include Holybourne Hill.

Map of Holybourne © OpenStreetMap contributors

What happens on the day

On the day, we start by going over the job with you. We protect the surfaces around the joints before any work begins. The work usually takes a few hours, depending on how many layers have to come out. Somewhere as small as Holybourne, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
  2. Old beads and residue are removed down to clean surfaces.
  3. Mould is treated and the joint dried.
  4. We reseal with a product suited to the joint, backed where needed.
  5. We finish neatly and point out anything that needs another trade.

How to prepare

  • Tell us about access, such as stairs, a lift or high-level joints
  • For indoor joints, keep the area dry beforehand if you can
  • Move anything stored near the joints

Ask for a quote

We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or email us.

Get a price

Advice

Work for landlords, hotels and businesses

Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.

We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will quote.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job