Surrey · England
Holmwood Corner Remedial Sealant
We cover Holmwood Corner for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- A second bead peeling off the first
- Leaks that keep coming back after resealing
- Beads that never stuck properly
Remedial sealant in Holmwood Corner
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We’re ARBOMaster approved and fully insured, and every remedial job comes with a 12-month guarantee. We work on shrunken worktop sealant, botched or over-sealed joints and expansion joints, and people most often call us about sealant applied over old sealant that has lifted and black mould underneath the bead.
Somewhere as small as Holmwood Corner, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
All of our work is guaranteed for twelve months.
- Location
- Holmwood Corner (RH5)
- Region
- Surrey
- Cover
- One year on every job
- Quote
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What we’re called out for in Holmwood Corner
Silicone only bonds to surfaces that are clean and dry. Soap film, dust, damp or old residue stop it gripping, so it starts lifting sooner than it should.
Signs it’s time to call us include:
- Over-sealed joints coming away
- Floor or wall movement joints that have failed
- Mould trapped under a layer of silicone
- Leaks that keep coming back after resealing
For an older house near a landmark such as Church of St Mary Magdalene, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Questions to ask before you book
- Whether the sealant suits the joint
- What preparation is included
- Whether they seal over old material or remove it
- How long the guarantee is
How we quote for remedial sealant
We don’t publish a price list, because no two jobs are the same. What we look at:
- Any working-time requirements on site
- The number and length of the joints
- The number of rooms or windows
- How much old sealant there is and how hard it is to remove
Combining jobs into one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We will send you a clear quote for the lot.
Helping us quote
When you contact us, it’s useful to know:
- What’s wrong with the joints now
- The address or postcode of the job
- If it’s domestic, commercial or a hotel
- A few photos by email, if you can
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved and send you a clear quote.
When it is not the sealant
New sealant can’t fix everything, and we’d rather say so up front. It will not solve:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A bath, tray or worktop that moves until it’s properly fixed
- Older mastics that may need an asbestos check before removal
If in doubt, ring 0345 464 0079 or email us and we’ll say what we think.
Where we work in Holmwood Corner
- Failed movement joints
- Leaking tray & enclosure joints
- Expansion joints
- Shrunken worktop sealant
- Botched or over-sealed joints
- Mouldy bath & shower sealant
Remedial sealant around Holmwood Corner
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For landlords with property near Holmwood station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. Managing a site like The Weald CofE Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Holmwood Corner is about 3 miles south of Dorking, in Surrey. Whether you are in the middle of Holmwood Corner or further out, we cover remedial sealant for every kind of property, from flats and houses to offices and hotels. Holmwood Corner is one of 395 places in Surrey where we work for remedial sealant. For nearby work, see our Crawley page (8 miles or so).
Our applicators cover all of RH5 for remedial sealant. Other places close to Holmwood Corner include South Holmwood (1 mile north-west), Beare Green (1 mile south), Coldharbour (2 miles west), Capel (3 miles south) and Friday Street (3 miles west). Within a short drive, we also cover Guildford (12 miles west), Woking (14 miles north-west), Epsom (11 miles north), Horley (7 miles east), Redhill (7 miles north-east) and Ewell (12 miles north).
Local landmarks in Holmwood Corner
Around Holmwood Corner, our work takes us to homes and buildings near Inholms Clay Pit, among other places. There’s a railway station in Holmwood Corner itself: Holmwood station. Nearby you’ll also find Mesolithic Museum (3.8 miles west) and Betchworth Castle (3.6 miles north). The countryside around Holmwood Corner includes Leith Hill and Vann Lake.
Landlords, agents and businesses in Holmwood Corner
Letting agents and landlords in Holmwood Corner can book us as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
For anyone letting property in or around Holmwood Corner, several properties can be quoted together. Just tell us the addresses and what each one needs.
How the job changes by surface
Leaking trays & enclosures
Repeat shower leaks often come from a tray that flexes or an enclosure sealed in the wrong place. Both are checked before we reseal.
Over-sealed & botched joints
Botched joints sometimes have damaged edges from earlier scraping. We take care not to make it worse, and point out any existing damage.
Should I try it myself first?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you’ve already had a go yourself, that is fine. We cut it out and start again, so just mention it when you contact us.
What happens on the day
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes a few hours, depending on how many layers have to come out. In a small place like Holmwood Corner, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
Preparing for the visit
- Tell us about any water getting in
- Mention any tricky access
- Move anything stored near the joints
Getting a quote
We quote each job on its own. Simply call 0345 464 0079 or email us and describe the job.
Read more
Common questions in Holmwood Corner
Is Holmwood Corner within the area you cover?
Yes, Holmwood Corner is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Holmwood station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
What sealant do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
What does remedial sealant cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote and we’ll talk you through it.
Can you do several jobs on one visit?
Of course. Combining jobs makes good use of the visit.
Is remedial work guaranteed?
Yes. Remedial work carries the same 12-month guarantee as all our work.
Can you take off two layers of silicone?
Yes. Each layer is cut out and the residue cleaned off, before resealing with a single bead.