Na h-Eileanan Siar · Scotland
Remedial sealant & repairs in Holm, Na h-Eileanan Siar
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Holm and across Na h-Eileanan Siar. Fully insured, ARBOMaster approved and guaranteed for a year.
- A shower that leaks however often it’s resealed
- Gaps opening along the back of the worktop
- Smears and lumps from a botched reseal
Signs you need remedial sealant in Holm
A lot of failed joints have been sealed over rather than replaced. Silicone does not bond to silicone, so the new layer peels, and damp and mould settle between them.
The problems people generally mention when they call are:
- Thick, messy sealant smeared over tiles
- Leaks that keep coming back after resealing
- Sealant that came away because the surface wasn’t prepared
- Caulk or the wrong sealant used in a wet area
In and around Holm, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
What your quote should include
- Is VAT in the price?
- What insurance they hold
- Who does the work, and how experienced they are
- How the surfaces are prepared before sealing
Remedial sealant for homes and businesses in Holm
Remedial work is what we do when sealant has failed or been done badly. New sealant over old, smeared beads, unsuitable products and hidden mould all have to come out before the joint can be done properly. We work on leaking tray & enclosure joints, botched or over-sealed joints and mouldy bath & shower sealant, and common reasons people get in touch are decorators’ caulk around a bath or shower and torn expansion joints.
For a place like Holm, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. We just plan the journey and access beforehand.
Your job is guaranteed for a year, as with all our work.
- Location
- Holm (HS2)
- Wider area
- Na h-Eileanan Siar
- Cover
- One year on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026

Remedial sealant in Holm: local notes
Holm is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Whether the job is in Holm itself or nearby, the right material for each joint matters as much as a neat finish.
Holm is about 2 miles south-east of Stornoway, in Na h-Eileanan Siar. For remedial sealant in and around Holm, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We are based in Crawley and cover Na h-Eileanan Siar. Holm is one of 87 places in Na h-Eileanan Siar where we work for remedial sealant.
Every address in HS2 is within our area for remedial sealant. Whether your property is on Holm Road and Parkend or a nearby road, our applicators can take on the job. Other places close to Holm include Sanndabhaig (1 mile north-west), Branahuie (1 mile north-east), Bràigh na h-Aoidhe (1 mile north-east), Sandwick (1 mile north-west) and Plasterfield (1 mile north-west). If you are somewhere remote, the job takes a little more planning, so let us know when you get in touch.
Landmarks near Holm
Well-known places in the area include Western Isles Hospital (2.5 miles north-west) and Lewis Loom Centre (2.3 miles north-west). The countryside around Holm includes Loch Àirigh na Lic.
What happens if it’s left?
Remedial work takes longer than a straight reseal, but rarely a lot: the work takes a few hours for most joints, depending on how much old sealant has to come out. It’s far less disruption than resealing the same joint again and again. In a place like Holm, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
The cost reflects the work involved, not guesswork. That is why we ask a few questions first.
Why book with us
- Anti-fungal sanitary silicone in wet areas
- 4.9 on Google from 180+ five-star reviews
- Approved under the ARBOMaster scheme
- A 12-month guarantee on all work
See our cost guide or customer reviews.
What affects the cost of remedial sealant
The quote reflects the job in front of us. We look at:
- How many areas need sealing
- The number and length of the joints
- Which sealant suits the joint
- The old material and how stubborn it is
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
What to tell us for a quote
When you contact us, it’s useful to know:
- Whether it’s a home or a business
- Where the property is
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
Need a quote? Please send an email to info@mrmastic.co.uk and tell us about the job. We’ll explain what we’d do and give you a clear quote before work begins.
Work for landlords, hotels and businesses
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.
Can I do it myself?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Towns and villages near Holm
More services for Holm
Your questions about remedial sealant in Holm
Is Holm within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.
Is Holm in your area for remedial sealant?
Yes, Holm is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
Do you have insurance?
Yes. We’re fully insured.
What happens if the problem is the tray or the plumbing?
In that case, we tell you what we’ve found. You may need a plumber or bathroom fitter before any new sealant goes on.
Is there any odour?
It depends on the product. Some smell for a while, some hardly at all.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. There’s normally a reason: sealant over sealant, movement or another leak, and we deal with the cause first.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status and we are fully insured too.
When it is not the sealant
In fairness, some problems need a different trade:
- Water damage behind tiles that needs a tiler
- Sealant in an older building that needs testing for asbestos first
- Plumbing leaks behind walls or under trays
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before booking.
Where we work in Holm
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Failed movement joints
- Expansion joints
- Botched or over-sealed joints
- Leaking tray & enclosure joints
How it works
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere like Holm may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start by checking the joint for movement, leaks and the reason it failed.
- All the old sealant comes out, including any layers underneath.
- We clean the joint, treat any mould and let it dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- Finally we finish the joint and talk you through what we found.
How to prepare
- Let us know about parking restrictions
- Clear items away from the joints we’re working on
- Mention any leaks or damp you’ve noticed
Get a quote
We quote each job on its own, so start by telling us what you need. Just send an email to info@mrmastic.co.uk with the details.
