Surrey · England

Remedial sealant & repairs in Hindhead, Surrey

Failed sealant joints in Hindhead need attention? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.

  • Kitchen joints letting water behind the worktop
  • Floor or wall movement joints that have failed
  • Sealant peeling off a dusty or damp surface

Remedial sealant for Hindhead homes and businesses

Questions from Hindhead

Do you cover smaller places like Hindhead?

Yes, Hindhead is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Do you work for landlords with property near Haslemere station?

Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear quote.

Where are you based?

We’re a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.

How long should I leave it?

Different products cure at different speeds, so please follow the time we give you when we finish.

Can I do it myself?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.

Can you strip sealant from an acrylic tray safely?

Yes. We avoid heavy scraping and use the right cleaner for each surface, so the new sealant bonds cleanly.

Someone resealed my shower and it’s leaking again. Can you help?

Yes. We will take all the sealant out, look for why it failed and reseal it properly.

Do you do commercial work?

Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.

Remedial sealant in Hindhead, done properly

Two decades of sealant work means we recognise most failures quickly. We’re fully insured ARBOMaster approved applicators, and every remedial job comes with a 12-month guarantee. If you’re dealing with sealant peeling off a dusty or damp surface and floor or wall movement joints that have failed, we can help, on expansion joints, leaking tray & enclosure joints and botched or over-sealed joints alike.

In a village or hamlet like Hindhead, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.

Big or small, you get the same one-year guarantee.

Place
Hindhead (GU26)
Region
Surrey
Cover
One year on every job
Price
A clear quote up front
Call
0345 464 0079
Updated
26 October 2026
Mr Mastic applicator smiling as he applies silicone to the corner of a bath

Aftercare tips

To keep the joints looking good and working properly:

  • Ask why a joint failed before redoing it
  • Report a tray that rocks or a worktop that lifts
  • Don’t add new sealant on top of old
  • Keep an eye on the ceiling below the bathroom

Keep the room ventilated: run the fan during and after showers, or open a window.

Signs to act on: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Any of them means it’s time for remedial work.

Remedial sealant in Hindhead: local notes

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

For an older house near a landmark such as Church of St Luke, older homes can move a little, which is hard on rigid grout and tired sealant. Managing a site like St Edmund's School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

Hindhead is about 7 miles south of Farnham, in Surrey. Whether you are in the middle of Hindhead or further out, remedial sealant is available for homes and businesses alike. 395 places in Surrey are on our list, large and small. We also work in Crawley, around 24 miles away.

Work in GU26 is quoted and booked the same way as anywhere else. Streets in the area include Moorlands Close, Hatchlands Drive and Glenville Gardens. You’ll find Hindhead on the A333, so it’s easy for us to get to. Other places close to Hindhead include Grayshott (1 mile west), Nutcombe (1 mile south), Beacon Hill (1 mile north-west), Whitmoor Vale (2 miles north-west) and Green Cross (2 miles north-west). Larger places within reach include Guildford (12 miles north-east), Camberley (15 miles north), Farnham (7 miles north), Frimley (14 miles north), Cranleigh (11 miles east) and Ash (9 miles north).

What’s near Hindhead

Around Hindhead, our work takes us to homes and buildings near Beacon Hill Community Primary School, The Fox & Pelican pub and Woolmer Hill School and the streets around them. For rail, the closest station is Haslemere station, roughly 1.9 miles south-east of the centre. A little further out are Haslemere and District Hospital (2 miles south-east). The countryside around Hindhead includes Gibbet Hill and Lynchmere Commons.

Map of Hindhead © OpenStreetMap contributors

Why it’s worth doing now in Hindhead

DIY removal often leaves scratches and a film of residue, and any film left behind stops new sealant sticking. Careful removal is most of a remedial job. Where a wall is exposed, as many are in small places like Hindhead, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

Doing several joints on one visit is generally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear quote for the lot.

Why us?

  • Homes, businesses and hotels
  • ARBOMaster approved applicator
  • We agree the colour with you first
  • Colour picked to suit the job

Take a look at how sealant jobs are priced or customer reviews.

What we are called out for in Hindhead

Sealant needs a clean, dry surface with no grease on it. Residue, moisture or dust left in the joint weaken the bond, so it starts lifting sooner than it should.

Signs it’s time to call us include:

  • Products that weren’t meant for the joint
  • Sealant that came away because the surface wasn’t prepared
  • Movement joints that have split or pulled away
  • Leaks that keep coming back after resealing

Letting a property close to Haslemere station? Then a joint that keeps failing is best fixed properly while the property is empty.

What your quote should include

  • What insurance they hold
  • Whether all the old sealant comes out first
  • Whether you can choose the colour
  • How the joint is cleaned and prepared

Choosing a sealant specialist

What we do, step by step

When we arrive, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before any work begins. The work generally takes a few hours, depending on how many layers have to come out. Somewhere as small as Hindhead, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We look at how the sealant has failed and check for movement or a leak path.
  2. Every layer of old sealant is cut and cleaned out.
  3. We clean the joint, treat any mould and let it dry.
  4. Where the joint moves, backing and a flexible sealant suited to the movement go in.
  5. We tool the joint and tell you about anything else that needs attention.

How to prepare

  • Tell us about any water getting in
  • For indoor joints, keep the area dry beforehand if you can
  • Clear items away from the joints we’re working on

Get a quote

To get a quote, ring 0345 464 0079 or email us with the location and a short description of the problem. We will send you a clear quote before any work starts.

Ask for a quote

Advice

When something else is needed

We won’t take on work that will not last, so here’s what sealant can’t put right:

  • Movement from fittings that aren’t supported
  • A leaking trap, valve or supply pipe
  • A tray or bath that is cracked

If you’re not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer before booking.

What we seal

  • Expansion joints
  • Failed movement joints
  • Mouldy bath & shower sealant
  • Leaking tray & enclosure joints
  • Shrunken worktop sealant
  • Botched or over-sealed joints

What affects the cost of remedial sealant

We don’t publish a price list, because jobs vary so much. The quote depends on:

  • Whether the work is at height
  • Any working-time requirements on site
  • How many areas need sealing
  • The number and length of the joints

A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.

Asking for a quote

Photos by email are helpful but not essential. Please mention:

  • Access, such as stairs, a lift or height
  • Where the property is
  • Photos by email, if that’s easy
  • If someone has resealed it before

We don’t publish a price list, because every job is different. Instead, we give you a clear quote for your job. To get started, phone 0345 464 0079 or send us an email.

DIY versus a professional finish

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.

If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job