Kent · England

Remedial sealant & repairs in Hareplain, Kent

Remedial sealant for Hareplain, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.

  • Thick, messy sealant smeared over tiles
  • Sealant that came away because the surface wasn’t prepared
  • Movement joints that have split or pulled away

Book remedial sealant in Hareplain

How we handle remedial sealant in Hareplain

Remedial work is what we do when sealant has failed or been done badly. Silicone laid over silicone, smears across tiles, the wrong product in a moving joint or mould trapped underneath all need stripping out. Common call-outs are for beads that never stuck properly and sealant applied over old sealant that has lifted, across shrunken worktop sealant, botched or over-sealed joints and leaking tray & enclosure joints.

Homes around Hareplain are mostly houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.

We guarantee the work for a year. If something is not right with it in that time, tell us and we’ll put it right.

Location
Hareplain (TN27)
Region
Kent
Guarantee
One year on every job
Quote
Quoted before any work starts
Phone
0345 464 0079
Page updated
26 October 2026
Fresh white silicone going into the corner where a shower screen meets the tiled wall

Do you need remedial sealant in Hareplain?

Joints that move need sealant that can stretch. Flexing baths, rocking trays and building movement joints split any bead that is too stiff or too thin.

Any of these means the joints need attention:

  • Kitchen joints letting water behind the worktop
  • Smears and lumps from a botched reseal
  • Sealant applied over old sealant that has lifted
  • Sealant that came away because the surface wasn’t prepared

Rented homes near Headcorn station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants.

Comparing quotes

  • How much experience the applicator has
  • Whether you can choose the colour
  • Whether the sealant suits the joint
  • What happens if the job turns out different

Our hiring checklist

What remedial sealant looks like in Hareplain

Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.

In and around Hareplain, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.

Hareplain is about 10 miles south of Maidstone, in Kent. Homes, rented property, offices and hotels in Hareplain is covered for remedial sealant, old or new, large or small. Every job comes with our one-year guarantee. Hareplain is one of 922 places in Kent where we work for remedial sealant. We also work in Crawley, around 35 miles away.

Our applicators cover all of the TN27 postcode area for remedial sealant and the streets around it. Other places close to Hareplain include Three Chimneys (1 mile south-west), Biddenden (1 mile south-east), Curteis' Corner (1 mile east), Lashenden (2 miles north-east) and Standen (2 miles east). Further out, we also cover Maidstone (10 miles north), Ashford (11 miles east), Royal Tunbridge Wells (15 miles west), Tonbridge (15 miles west), Kings Hill (14 miles north-west) and Foley Park (11 miles north).

Near you in Hareplain

In Hareplain, that means homes and buildings near Three Chimneys Public House and the streets around them. The nearest railway station is Headcorn station, roughly 2.8 miles north. A little further out are Kent Firefighting Museum (0.8 miles north) and Sissinghurst Castle (1.7 miles south-west).

Map of Hareplain © OpenStreetMap contributors

Can I do it myself?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.

If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

Work for landlords, hotels and businesses

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.

We regularly work with letting and managing agents. Tell us the address, the job and how access works.

Why deal with it now?

Repeat failures have a cause. Taking time to find the cause, whether it’s movement, a leak or the wrong product, is what stops it happening again. Where a wall is exposed, as many are in small places like Hareplain, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

Leaving a failed joint usually makes the job bigger, not smaller. If you are not sure whether it needs doing, phone 0345 464 0079 or email us and we’ll give you an honest view and a quote.

Why choose Mr Mastic in Hareplain

  • White, clear, grey or coloured to suit, where the product allows
  • Experience in homes, commercial sites and hotels
  • One-year guarantee on every job
  • We agree the colour with you first

Read our cost guide or customer reviews.

What we do, step by step

Before we leave, we go over the finished joints with you and tell you how long to leave it. The visit itself normally takes a few hours for most joints, depending on how much old sealant has to come out, depending on the amount of work. In a small place like Hareplain, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. First we find out how and where the joint has failed.
  2. All the old sealant comes out, including any layers underneath.
  3. The joint is cleaned, treated for mould and left to dry.
  4. We use the right backing and sealant for any joint that moves.
  5. We tool the joint and tell you about anything else that needs attention.

Before we arrive

  • Let us know about earlier repairs to the joints
  • Let us know about parking restrictions
  • Tell us about any water getting in

Ask for a quote

The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.

Get a quick quote

Related advice

Hareplain questions

I let a flat near Headcorn station. Can you help?

Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can call 0345 464 0079 or email us with the details for a clear quote.

Will you come out to Hareplain?

Yes, Hareplain is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.

Is remedial work guaranteed?

Yes. You get our 12-month guarantee.

Does someone need to be in?

If the work is inside, we need someone to let us in. After that, you can carry on with your day.

My shower still leaks after a reseal. Can you sort it?

Yes. First we check whether the leak is the sealant at all, then the joints are stripped and resealed.

Do you have insurance?

Yes. Full insurance covers our work, and we can confirm the details when we quote.

Will there be a smell?

Some sealants have a smell while they cure, but it fades. Ventilation helps.

When is the sealant fully cured?

Most sealants are touch-dry well before they’re fully cured. We’ll tell you how long to leave the joint before we leave.

Honest limits

Honest advice matters more to us than a booking, so here’s what new sealant will not do:

  • A leaking trap, valve or supply pipe
  • Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
  • A cracked shower tray or bath (that needs repair or replacing)

If you are not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer.

Surfaces we seal

  • Expansion joints
  • Botched or over-sealed joints
  • Mouldy bath & shower sealant
  • Shrunken worktop sealant
  • Failed movement joints
  • Leaking tray & enclosure joints

How to look after the new joints

Simple care keeps the joints in good condition. We recommend:

  • Deal with small splits early
  • Look for stains below bathrooms now and then
  • Never seal over old silicone
  • Keep bleach and abrasives off the bead

Where we have pointed out another fault, have it put right, because the new sealant can’t hold back a problem underneath.

Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into whatever is behind or below. Early action keeps it to a sealant job.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job