Surrey · England
Fernhurst Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right in Fernhurst, with a one-year guarantee on every job. Call for a quick quote.
- Caulk or the wrong sealant used in a wet area
- Repeat leaks from the same joint
- Worktop sealant that has shrunk and split
For landlords and businesses
For anyone letting property in or around Fernhurst, several properties can be quoted together. Send us the addresses and the work at each.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Remedial sealant for homes and businesses in Fernhurst
Two decades of sealant work means we recognise most failures quickly. We are fully insured ARBOMaster approved applicators, and every remedial job comes with a 12-month guarantee. We are often asked to deal with repeat leaks from the same joint and sealant peeling off a dusty or damp surface, on botched or over-sealed joints, expansion joints and shrunken worktop sealant.
Somewhere as small as Fernhurst, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Each job carries a 12-month guarantee.
- Where
- Fernhurst (GU27)
- Region
- Surrey
- Cover
- One year on every job
- Quote
- A clear price before we start
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
What we do, step by step
We keep the work tidy and contained to the joints we’re treating, so you can get on with your day. Expect the work to take a few hours for a typical bath or shower, longer where several layers have been applied. For a village or hamlet like Fernhurst, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- We clean the joint, treat any mould and let it dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
Get a quote
We quote each job on its own, so the first step is telling us about yours. Simply ring 0345 464 0079 or send us an email and describe the job, and pictures are welcome.
Read more
Fernhurst: your questions answered
Will you come out to Fernhurst?
Yes. Fernhurst is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is Fernhurst in your area for remedial sealant?
Yes, Fernhurst is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or email us with a few details of the job.
Do you have insurance?
Yes. Full insurance covers our work.
Do I need to be at home?
Access is agreed with you when the job is booked. Indoors, that usually means someone at home.
Will the old sealant be removed?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Do you do commercial work?
Yes. Larger jobs can be planned room by room or area by area to suit the site.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can you remove old sealant without damaging the bath?
Yes. Residue is removed with a product suited to the surface rather than scraped hard, so the new sealant bonds cleanly.
Also near Fernhurst
Other services in Fernhurst
Different surfaces, different methods
Worktops & kitchens
If a worktop moves when you lean on it, the sealant will keep splitting. That needs refixing before resealing, and we’ll tell you if we find it.
Mouldy bath & shower sealant
Black mould inside the bead won’t scrub out. All of it comes out, and the joint is treated and dried before anti-fungal sanitary silicone goes in.
What we can’t put right
It helps to know what we cannot do too:
- Plumbing leaks behind walls or under trays
- Failed tanking or loose tiles behind the sealant
- Movement from fittings that aren’t supported
If you are not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
What we seal
- Failed movement joints
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Expansion joints
Quotes for remedial sealant in Fernhurst
You will get a clear quote before work begins. It’s based on:
- Access and height
- The type of sealant required
- Any working-time requirements on site
- How much old sealant there is and how hard it is to remove
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we will explain what it covers.
What to tell us for a quote
When you contact us, these details help:
- If someone has resealed it before
- If it’s domestic, commercial or a hotel
- Pictures of the joints, sent by email
- How we’d reach the joints
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. Whenever you are ready, phone 0345 464 0079 or email us.
Fernhurst homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Schools such as Fernhurst Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For an older house near a landmark such as The Parish Church of St Margaret, older homes can move a little, which is hard on rigid grout and tired sealant. Letting a property close to Haslemere station? Then botched sealant from a previous quick fix is easier to strip out between tenants.
Fernhurst is about 10 miles east of Petersfield, in Surrey. From the centre of Fernhurst to the outskirts, remedial sealant is available for homes and businesses alike. Our Surrey coverage runs to 395 places, and Fernhurst is one of them. Our Portsmouth page covers work nearby (23 miles or so).
We cover every part of GU27 for remedial sealant. You will find streets such as Church Road, Merle Way and Bishops Close. If you’re just outside Fernhurst, we cover Kingsley Green (1 mile north), Woolmer Hill (2 miles north-west), Linchmere (2 miles north-west), Redford (3 miles south-west) and Haslemere (3 miles north). We also work in nearby towns such as Guildford (15 miles north-east), Farnham (11 miles north), Cranleigh (12 miles north-east), Ash (14 miles north), Godalming (10 miles north-east) and Farncombe (11 miles north-east).
Near you in Fernhurst
For rail, the closest station is Haslemere station, roughly 2.7 miles north of the centre. Nearby you will also find Haslemere and District Hospital (2.9 miles north). Open spaces near Fernhurst include Blackdown and Cooksbridge Meadow.
Aftercare tips
Looking after new joints is easy:
- Clean sealant with mild products only
- Air the bathroom so the sealant can dry
- Keep an eye on the ceiling below the bathroom
- Act on a lifting corner right away
Where we’ve pointed out another fault, have it put right, because the new sealant can’t hold back a problem underneath.
Signs to act on: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Any of them means it’s time for remedial work.