East Sussex · England
Fairlight Remedial Sealant
Problem with your failed sealant joints in Fairlight? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Floor or wall movement joints that have failed
- Decorators’ caulk around a bath or shower
- Beads that never stuck properly
Common problems we fix in Fairlight
Using the wrong product is a common cause: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. None of them last.
It’s worth asking for a quote if you see:
- Kitchen joints letting water behind the worktop
- Sealant applied over old sealant that has lifted
- Repeat leaks from the same joint
- Smears and lumps from a botched reseal
Managing a site like The Hastings Academy? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
What your quote should include
- What the quote includes, VAT included or not
- What insurance they hold
- What happens if they find a problem under the old sealant
- The length of the guarantee
About our remedial sealant in Fairlight
Decorators’ caulk in a shower, bathroom silicone on a window, a rigid filler in a movement joint fails however neatly it’s applied. We take it out and use a sealant made for that joint. We work on shrunken worktop sealant, expansion joints and failed movement joints, and the jobs we see most are beads that never stuck properly and gaps opening along the back of the worktop.
Around Fairlight, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Our work is backed for twelve months, in Fairlight and everywhere else we cover.
- Location
- Fairlight (TN35)
- Region
- East Sussex
- Guarantee
- A year, on every job
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Places near Fairlight
Also in Fairlight
Can I do it myself?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
How the visit works
The work is kept neat and contained to the area we are working on, so you can carry on as normal. The job generally takes a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere like Fairlight needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Mention any parking rules near the property
- Tell us about any previous sealing or DIY attempts
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Read more
Landlord and commercial work in Fairlight
We work for letting agents and landlords as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.
Hotels need rooms back in use, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
What the job involves on each surface
Windows & doors
Smeared or badly matched mastic can be cut out and redone neatly, in a colour that suits the frame.
Movement & expansion joints
Movement joints in floors, walls and façades need a flexible sealant set to the right depth. Failed sealant is cut out, backing rod or tape is fitted and the joint resealed.
Remedial sealant in Fairlight: local notes
Fairlight is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Three Oaks station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. If you live in an older home near The Parish Church of St Andrew, older homes can move a little, which is hard on rigid grout and tired sealant.
Fairlight is about 4 miles east of Hastings, in East Sussex. Our applicators cover remedial sealant for homeowners, landlords and businesses in Fairlight and nearby, as part of our work across East Sussex. We cover 289 towns and villages across East Sussex. For nearby work, see our Brighton page (34 miles or so).
We work across the TN35 postcode area for remedial sealant and the streets around it. Streets in the area include Hill Road, The Close and Lower Coastguard Lane, and we cover them all. Close by, we work in Fairlight Cove (1 mile east), Friar's Hill (1 mile north), Guestling (1 mile north-west), Bachelor's Bump (1 mile west) and Guestling Green (1 mile north-west). We also work in nearby towns such as Hastings (4 miles west), Bexhill-on-Sea (8 miles west), St Leonards (4 miles west), Hastings Old Town (3 miles south-west), Belmont (3 miles south-west) and Langney (15 miles west).
Around Fairlight
We work in homes and buildings around Speckled Wood and the streets around them. The closest station to Fairlight is Three Oaks station, roughly 2.2 miles north-west. Well-known places in the area include Hastings Old Town Hall Museum (2.7 miles south-west) and Conquest Hospital (3.4 miles west). For a walk, there’s Church Wood and Robsack Wood.
What affects the cost of remedial sealant
We don’t publish a price list, because no two jobs are the same. What we look at:
- The number and length of the joints
- How much old sealant there is and how hard it is to remove
- The number of rooms or windows
- How easy the joints are to reach
Leaving a failed joint normally makes the job bigger, not smaller. If you are not sure whether it needs doing, call 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Helping us quote
When you call or email, these details help:
- The problem you’ve noticed
- Roughly how big the job is
- Whether it has been sealed before
- How we’d reach the joints
Every job is quoted individually, so start by telling us what you need. Simply ring 0345 464 0079 or send us an email and describe the job and send photos if you have them.
Fairlight: your questions answered
Can you help a landlord with a rental near Three Oaks station?
Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Is Fairlight within the area you cover?
Yes. Fairlight is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
How do I get a quote for remedial sealant in Fairlight?
It depends on the job, so we quote each one individually. To get one, ring 0345 464 0079 or drop us an email and let us know what needs doing and where.
Someone sealed over the old bead. Can you fix it?
Yes. We cut out all the layers and clean off the film, then the joint is resealed once.
Can I choose the sealant colour?
Yes. White, clear and grey are common, and other colours are available, and we agree the colour with you before any work starts.
Do I need to be at home?
It depends on the job. For work indoors, someone needs to let us in.
Does remedial work come with a guarantee?
Yes. Every job comes with our 12-month guarantee.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. A few tips:
- Never seal over old silicone
- Keep bleach and abrasives off the bead
- Run the fan after every shower
- Ask why a joint failed before redoing it
Clean gently: a mild cleaner and a soft cloth, with no blades or scourers.
Movement joints that have split let water into the structure, and left long enough, the edges of the joint can crumble. Resealing while the edges are sound is simpler.