Kent · England
Remedial sealant & repairs in Elvington, Kent
Failed sealant joints in Elvington need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Floor or wall movement joints that have failed
- Sealant applied over old sealant that has lifted
- Gaps opening along the back of the worktop
Why act early in Elvington
Hidden water does the most damage: soaked floorboards, ceiling stains below and blown plaster. Dealing with the joint now is a small job by comparison. Around Elvington, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Leaving a failed joint normally makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, call 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
Why Elvington clients choose us
- A sealant colour to suit the surroundings
- We are fully insured
- White, clear, grey or coloured to suit, where the product allows
- Experience in homes, commercial sites and hotels
Read how sealant jobs are priced and our reviews.
Remedial sealant in Elvington
If a joint fails again and again, something is causing it. Movement, the wrong product or a leak from somewhere else will defeat even a perfect bead. We look for the cause before we reseal. We work on leaking tray & enclosure joints, mouldy bath & shower sealant and botched or over-sealed joints, and people most often call us about smears and lumps from a botched reseal and sealant applied over old sealant that has lifted.
Being in a small place like Elvington makes no difference to the job itself: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
A 12-month guarantee comes as standard, so you’re not left on your own once the job is done.
- Location
- Elvington (CT15)
- Region
- Kent
- Cover
- A year, on every job
- Quote
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Check trays and worktops do not move
- Air the bathroom so the sealant can dry
- Don’t add new sealant on top of old
- Look for stains below bathrooms now and then
Keep an eye on the joint at first, especially if movement was the problem. Should anything change, phone 0345 464 0079 or email us.
Warning signs: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Any of them means it’s time for remedial work.
Quotes for remedial sealant in Elvington
We quote each job individually. These are the things that affect it:
- How much there is to do
- Any mould that needs treating
- The old material and how stubborn it is
- How many rooms, windows or areas are involved
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part.
What we need to know
There’s no need for technical detail. Just tell us:
- Where the property is
- The type of property
- Any previous sealing or DIY work
- Pictures of the joints, sent by email
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Should I try it myself first?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
How it works
Before we leave, we go over the finished joints with you. The visit itself generally takes a few hours for a typical bath or shower, longer where several layers have been applied, depending on the size of the job. Somewhere like Elvington needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We look at how the sealant has failed and check for movement or a leak path.
- All the old sealant comes out, including any layers underneath.
- Next, any mould is treated and the joint dried.
- We use the right backing and sealant for any joint that moves.
- We tool the joint and tell you about anything else that needs attention.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Tell us if parking is tricky
- For business premises, tell us about site rules or sign-in
How to get a quote
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or drop us an email.
Related advice
What remedial sealant looks like in Elvington
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
If you let a flat or house near Shepherds Well station, botched sealant from a previous quick fix is easier to strip out between tenants. For site and facilities teams at buildings such as Eythorne Elvington Community Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. For an older house near a landmark such as Church of St Peter and St Paul, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Elvington is about 5 miles north of Dover, in Kent. For remedial sealant in and around Elvington, it’s easy to get a quote: please ring 0345 464 0079 or send us an email. We cover Kent from our Crawley base, Elvington included. 922 places in Kent are on our list. We also work in Chelmsford, about 49 miles from Elvington.
We cover every part of the CT15 postcode area for remedial sealant and the streets around it. You will find streets such as Sweetbriar Lane, Poplar Drive and Fairview Road. Neighbouring places we cover for remedial sealant include Barfrestone (1 mile west), Frogham (1 mile west), Tilmanstone (2 miles east), Nonington (2 miles north-west) and Chillenden (2 miles north). Within a short drive, we also cover Canterbury (9 miles north-west), Margate (13 miles north-east), Dover (5 miles south), Folkestone (9 miles south-west), Ramsgate (11 miles north-east) and Broadstairs (13 miles north-east).
Near you in Elvington
We work in homes and buildings around The White Horse pub and the streets around them. For rail, the closest station is Shepherds Well station, roughly 1.9 miles south-west of the centre. Nearby you will also find Buckland Hospital (5.5 miles south).
Towns and villages near Elvington
More services for Elvington
What we cannot put right
We will not take on work that won’t last, so here’s what sealant cannot put right:
- Movement from fittings that are not supported
- Sealant in an older building that needs testing for asbestos first
- Plumbing leaks behind walls or under trays
If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think.
Surfaces we seal
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Shrunken worktop sealant
- Failed movement joints
- Leaking tray & enclosure joints
- Expansion joints
FAQs for Elvington
Do you cover smaller places like Elvington?
Yes, Elvington is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for landlords with property near Shepherds Well station?
Yes, we work for landlords and agents. You can ring 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Do I need to be at home?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Can you work on commercial sites?
Yes, regularly. Larger jobs can be planned room by room or area by area to suit the site.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we’re using.
Someone sealed over the old bead. Can you fix it?
Yes. Each layer is cut out and the residue cleaned off, before resealing with a single bead.
When is the sealant fully cured?
Many sealants skin over quickly but take longer to cure fully. We will tell you how long to leave the joint before we leave.
Is it worth trying it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs.
Different surfaces, different methods
Mouldy bath & shower sealant
Where mould keeps coming back, ventilation is normally part of the cause. We will reseal and tell you if extraction looks to be the issue.
Movement & expansion joints
A movement joint must be able to stretch. Failed sealant is cut out, backing rod or tape is fitted and the joint resealed with a low-modulus product.