Kent · England

Remedial sealant & repairs in Cobham, Kent

Remedial sealant for Cobham and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.

  • Black mould underneath the bead
  • Kitchen joints letting water behind the worktop
  • Sealant applied over old sealant that has lifted

Need remedial sealant in Cobham?

Quotes for remedial sealant in Cobham

Every job gets its own quote. This is what makes a difference:

  • The number of rooms or windows
  • The size of the job
  • When we can work, for business premises
  • Mould in or behind the old joints

Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. We will send you a clear quote for the lot.

Helping us quote

There’s no need for technical detail. It helps if you can tell us:

  • The problem you’ve noticed
  • Where the job is, and your postcode
  • Access, such as stairs, a lift or height
  • If someone has resealed it before

Every job is quoted individually, so the first step is telling us about yours. Just ring 0345 464 0079 or drop us an email with the details and send pictures if you have them.

Remedial sealant for homes and businesses in Cobham

Some sealant jobs are not a simple reseal, because someone has already had a go. Silicone laid over silicone, smears across tiles, the wrong product in a moving joint or mould trapped underneath all need stripping out. If you are dealing with thick, messy sealant smeared over tiles and kitchen joints letting water behind the worktop, we can help, on mouldy bath & shower sealant, shrunken worktop sealant and leaking tray & enclosure joints alike.

For a small place like Cobham, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.

Whatever the size of the job, you get the same one-year guarantee.

Location
Cobham (DA12)
Wider area
Kent
Cover
12 months on all our work
Quotes
A clear quote up front
Phone
0345 464 0079
Updated
26 October 2026
Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom

Common problems we fix in Cobham

Sealant needs a clean, dry surface with no grease on it. Soap film, dust, damp or old residue stop it gripping, and the joint starts to come away early.

These are the problems we’re asked about most:

  • Kitchen joints letting water behind the worktop
  • Black mould underneath the bead
  • A second bead peeling off the first
  • Floor or wall movement joints that have failed

If you live in an older home near Parish Church of St Mary Magdalene, walls and floors in older homes can move, and sealant and grout show it first.

Questions to ask before you book

  • What the cure time is
  • Who does the work, and how experienced they are
  • What guarantee comes with the work
  • What happens if they find a problem under the old sealant

Choosing a sealant specialist

What remedial sealant looks like in Cobham

Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

For site and facilities teams at buildings such as Cobham Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For landlords with property near Sole Street station, a joint that keeps failing is best fixed properly while the property is empty.

Cobham is about 3 miles south of Gravesend, in Kent. We carry out remedial sealant for householders, landlords and businesses in Cobham, as part of our work across Kent. Cobham is one of 922 places in Kent where we work. There’s also a page for London, roughly 23 miles from Cobham.

Postcode districts we cover here for remedial sealant: DA12. We cover properties on The Street, Lawrence Drive and Cobhambury Road. Neighbouring places we cover for remedial sealant include Upper Bush (2 miles south-east), Lower Bush (2 miles south-east), Cuxton (2 miles south-east), North Halling (3 miles south-east) and Upper Halling (3 miles south). Further out, we also cover Maidstone (10 miles south-east), Sittingbourne (15 miles east), Dartford (8 miles north-west), Sevenoaks (12 miles south-west), Gravesend (3 miles north) and Tonbridge (14 miles south).

Around Cobham

Typical jobs here are in homes near Thamesview School, The Ship Inn and Jeskyns, among other places. Cobham’s nearest station is Sole Street station, about 1.2 miles south-west. Nearby you will also find Rochester Castle (4.3 miles east) and Gravesham Community Hospital (3.9 miles north-west). Not far away are Gad's Hill and Ranscombe Farm.

Map of Cobham © OpenStreetMap contributors

Your questions about remedial sealant in Cobham

Is Cobham in your area for remedial sealant?

Yes. We work across London and the South East, and Cobham is part of that. Just call 0345 464 0079 or send us an email with a few details of the job.

Can you help a landlord with a rental near Sole Street station?

Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll send you a clear quote.

Are you insured?

Yes. We’re fully insured.

How long will it take to strip and reseal the joint?

Longer than a simple reseal, because every layer has to come out. For most joints, it’s a few hours.

What information do you need?

The location, the problem and the rough size of the job. If you can, email a few photos.

Will it make a mess?

Not at all. The area is protected while we work and cleaned up afterwards.

Does someone need to be in?

Access is agreed with you when the job is booked. Indoors, that normally means someone at home.

Do you work for hotels and businesses?

Yes. Hotels, offices and other businesses use us.

The process

Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes a few hours, depending on how many layers have to come out, depending on the size of the job. In a small place like Cobham, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We look at how the sealant has failed and check for movement or a leak path.
  2. All the old sealant comes out, including any layers underneath.
  3. Next, any mould is treated and the joint dried.
  4. We use the right backing and sealant for any joint that moves.
  5. Finally we finish the joint and talk you through what we found.

Preparing for the visit

  • Move anything stored near the joints
  • Let us know if you’ve seen damp or leaks
  • Let us know about parking restrictions

Get a quote

Want a quote for remedial sealant? Please phone 0345 464 0079 or drop us an email with a few details. We will explain what we’d do and give you a clear price before any work starts.

Get a quick quote

Read more

Should I try it myself first?

If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.

Landlord and commercial work in Cobham

Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can go on one quote.

Landlords and letting agents in Cobham can book us as well as householders. Resealing between tenancies keeps a property looking cared for.

Keeping the joints in good condition

No joint lasts for ever, but care makes a real difference. Our tips:

  • Do not add new sealant on top of old
  • Check trays and worktops do not move
  • Get the cause of a repeat leak found before resealing
  • Check ceilings under showers for marks

Clean gently: a mild cleaner and a soft cloth, with no blades or scourers.

A split movement joint lets rain into walls and floors, and left long enough, the edges of the joint can crumble. A joint with sound edges is far easier to reseal.

Honest limits

Some problems need a builder, plumber or other trade rather than us:

  • A leaking trap, valve or supply pipe
  • Movement from fittings that are not supported
  • A cracked shower tray or bath (that needs repair or replacing)

If in doubt, phone 0345 464 0079 or email us and we’ll say what we think.

Surfaces we seal

  • Mouldy bath & shower sealant
  • Expansion joints
  • Failed movement joints
  • Leaking tray & enclosure joints
  • Shrunken worktop sealant
  • Botched or over-sealed joints
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job