Surrey · England

Remedial Sealant in Burstow

Failed sealant joints in Burstow need attention? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.

  • Kitchen joints letting water behind the worktop
  • Leaks that keep coming back after resealing
  • Decorators’ caulk around a bath or shower

Remedial sealant for Burstow homes and businesses

Remedial sealant for homes and businesses in Burstow

A movement joint stops working when its sealant splits or sets hard. The old sealant comes out and backing goes in to control the depth, before resealing with a flexible product suited to the movement. We work on botched or over-sealed joints, mouldy bath & shower sealant and shrunken worktop sealant, and people most often call us about a second bead peeling off the first and leaks that keep coming back after resealing.

For a small place like Burstow, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.

We stand behind the work with a 12-month guarantee, so you’re covered after we have gone.

Mr Mastic applicator smiling as he applies silicone to the corner of a bath
Place
Burstow (RH6)
Wider area
Surrey
Guarantee
A year, on every job
Price
A clear price before any work starts
Telephone
0345 464 0079
Last updated
26 October 2026

Remedial sealant around Burstow

There are hotels and other places to stay in and around Burstow. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

Rented homes near Gatwick Airport station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants. Managing a site like Oakwood School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

Burstow is about 2 miles south-east of Horley, in Surrey. For remedial sealant in and around Burstow, it’s easy to get a quote: please call 0345 464 0079 or email us. We cover Surrey from our Crawley base, Burstow included. Across Surrey, we cover 395 places, and Burstow is one of them.

Every address in RH6 is covered for remedial sealant. Whether your property is on Church Road, Church Lane and Green Lane or a nearby road, our applicators can take on the job. Other places close to Burstow include Fernhill (1 mile west), Shipley Bridge (1 mile south-west), Keeper's Corner (1 mile east), Copthorne (1 mile south) and Tinsley Green (1 mile south-west). Further out, we also cover Epsom (14 miles north-west), Redhill (6 miles north), Ewell (15 miles north), Reigate (6 miles north-west), Caterham (9 miles north) and Dorking (10 miles north-west).

Around Burstow

In Burstow, that means homes and buildings near The Shipley Bridge pub, among other places. For rail, the closest station is Gatwick Airport station, about 1.3 miles west of the centre. Nearby you’ll also find Langley Green Hospital (3.1 miles south-west) and County Mall (3.7 miles south-west). For a walk, there’s Hedgecourt Lake.

Map of Burstow © OpenStreetMap contributors

FAQs for Burstow

Can you help a landlord with a rental near Gatwick Airport station?

Yes. We work for landlords and agents as well as homeowners. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.

Is Burstow within the area you cover?

Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Do I need to be at home?

That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.

Do you have insurance?

Yes. We are fully insured, and we’ve been doing sealant work for more than 20 years.

Will there be a smell?

That depends on the sealant. Some smell for a while, some hardly at all, and any smell fades as they cure.

Will you leave a mess?

Not at all. The area is protected while we work and cleaned up afterwards.

What information do you need?

Tell us what needs doing and where. We’ll ask anything else we need to know.

How much does remedial sealant cost in Burstow?

It depends on the job, so we quote each one individually. For a quick quote, ring 0345 464 0079 or email us with a short description of the job.

When it isn’t the sealant

It helps to know what we can’t do too:

  • A bath, tray or worktop that moves until it’s properly fixed
  • A leaking trap, valve or supply pipe
  • Older mastics that may need an asbestos check before removal

Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly before you book.

What we seal

  • Expansion joints
  • Botched or over-sealed joints
  • Shrunken worktop sealant
  • Mouldy bath & shower sealant
  • Failed movement joints
  • Leaking tray & enclosure joints

Landlord and commercial work in Burstow

We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.

Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.

What we do, step by step

At the end, we look at the finished work together. The work normally takes a few hours for a typical bath or shower, longer where several layers have been applied, depending on the size of the job. For a village or hamlet like Burstow, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. First we work out whether the problem is the sealant, movement or a leak.
  2. Each layer is cut out and the residue cleaned off.
  3. We treat any mould and dry the joint thoroughly.
  4. The right product goes in, with backing where the joint moves.
  5. We finish neatly and point out anything that needs another trade.

Preparing for the visit

  • Let us know about parking restrictions
  • Mention any sign-in or site rules at work premises
  • Tell us about access, such as stairs, a lift or high-level joints

Ask for a quote

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, phone 0345 464 0079 or drop us an email.

Get a quick quote

Advice

Keeping the joints in good condition

Good habits help new joints last longer. Our tips:

  • Don’t point over movement joints
  • Clean sealant with mild products only
  • Get the cause of a repeat leak found before resealing
  • Check trays and worktops do not move

If the joint ever needs renewing, have it cut out, not sealed over. Over-sealing is how many remedial jobs start.

Don’t keep resealing the same joint. Get the cause found first, or the next bead will go the same way.

How we quote for remedial sealant

Jobs vary more than people expect. The main factors:

  • How many areas need sealing
  • How easy the joints are to reach
  • Which sealant suits the joint
  • Mould in or behind the old joints

The cost depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.

What to tell us for a quote

Photos help, but a description is a good start. Please mention:

  • Whether it’s a home or a business
  • How we’d reach the joints
  • Any previous sealing or DIY work
  • The rough size of the job

We do not publish a price list. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or drop us an email.

Can I do it myself?

A DIY attempt does not rule out a professional job. We remove it and do the joint properly.

Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.

Signs you need remedial sealant in Burstow

Movement tears sealant that is not designed for it. Flexing baths, rocking trays and building movement joints split any bead that is too stiff or too thin.

People generally contact us after spotting something like this:

  • Wide, uneven beads that look worse than the old ones
  • Sealant that came away because the surface wasn’t prepared
  • Decorators’ caulk around a bath or shower
  • Gaps opening along the back of the worktop

For an older house near a landmark such as Church of St Bartholomew, walls and floors in older homes can move, and sealant and grout show it first.

What to look for in a quote

  • How hidden problems are handled
  • What the quote includes, VAT included or not
  • When the joint can take water or movement
  • How much experience the applicator has

How to choose a mastic man

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job