Essex · England
Remedial sealant & repairs in Broadley Common, Essex
Specialist remedial sealant for Broadley Common: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Black mould underneath the bead
- Caulk or the wrong sealant used in a wet area
- Sealant that came away because the surface wasn’t prepared
About our remedial sealant in Broadley Common
Some sealant jobs are not a simple reseal, because someone has already had a go. New sealant over old, smeared beads, unsuitable products and hidden mould all have to come out. If you are dealing with a shower that leaks however often it’s resealed and sealant applied over old sealant that has lifted, we can put it right, on failed movement joints, leaking tray & enclosure joints and mouldy bath & shower sealant alike.
Around Broadley Common, it’s houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
The work is covered for a year after we finish. If there’s a problem with it, please call 0345 464 0079 or email us.
- Where
- Broadley Common (EN9)
- Wider area
- Essex
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Landlords, agents and businesses in Broadley Common
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
What happens if it’s left?
Remedial work takes longer than a straight reseal, but rarely a lot: the work takes a few hours, depending on how many layers have to come out. Compared with chasing the same leak every few months, it’s time well spent. In a small place like Broadley Common, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we will go through it with you.
What you get with us
- Arbo and Everbuild products
- Old sealant always removed completely
- Anti-fungal sanitary silicone in wet areas
- ARBOMaster approved applicator
See our cost guide and what customers say.
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Keeping the joints in good condition
Good habits help new joints last longer. A few tips:
- Never seal over old silicone
- Have loose fittings fixed before resealing
- Keep bleach and abrasives off the bead
- Do not point over movement joints
Watch the joint over the first few weeks, particularly where the original failure was caused by movement. If anything changes, just ring 0345 464 0079 or email us.
Mould under a second layer of sealant keeps growing out of sight. When it finally shows, the whole bead needs to come out.
The process
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for a typical bath or shower, longer where several layers have been applied, and the area is left clean. In a small place like Broadley Common, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you’re told about anything else we found.
How to prepare
- Mention any leaks or damp you’ve noticed
- Mention any tricky access
- Clear items away from the joints we are working on
How to get a quote
To get a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.
Read more
Surface by surface
Mouldy bath & shower sealant
Where mould keeps coming back, ventilation is normally part of the cause. Along with resealing, we will mention if the room needs better ventilation.
Windows & doors
Wrong-coloured or messy mastic can be replaced for appearance too, matched to the frame colour.
When it isn’t the sealant
Some problems need a builder, plumber or other trade rather than us:
- Sealant in an older building that needs testing for asbestos first
- Cracks in the fitting rather than the joint
- Movement from fittings that aren’t supported
If in doubt, call 0345 464 0079 or drop us an email and we will say what we think before booking.
Surfaces we seal
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Failed movement joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Expansion joints
Broadley Common homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
If you let a flat or house near Roydon station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. For site and facilities teams at buildings such as Water Lane Primary Academy, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. If you live in an older home near Church of All Saints, older homes can move a little, which is hard on rigid grout and tired sealant.
Broadley Common is about 3 miles south-west of Harlow, in Essex. If you need remedial sealant in Broadley Common, it’s easy to get a quote: please call 0345 464 0079 or drop us an email. We cover Essex from our Crawley base. Our area takes in 644 places across Essex, large and small. London is on our list too, about 18 miles from Broadley Common.
Our applicators cover all of EN9 for remedial sealant and the streets around it. That includes homes and businesses on Common Road, Epping Road and Nazeing Common. Nearby, we also carry out remedial sealant in Tylerscross (1 mile north), Nazeing (1 mile south-west), Jack's Hatch (1 mile east), Roydon Hamlet (1 mile north-west) and Halls Green (1 mile north-west). Larger places within reach include Harlow (3 miles north-east), Brentwood (13 miles south-east), Loughton (7 miles south), Waltham Abbey (4 miles south-west), Epping (4 miles south-east) and Stansted Mountfitchet (12 miles north-east).
Landmarks near Broadley Common
Typical jobs here are in homes near Nazeing Triangle, Stewards School and Black Swan Public House, among other places. The closest station to Broadley Common is Roydon station, roughly 2.4 miles north-west of the centre. Well-known places in the area include Nazeing Glass Museum (2.6 miles west) and Harlow Mill (4.4 miles north-east). The countryside around Broadley Common includes Cheshunt Lake and Hunsdon Mead.
Also near Broadley Common
More services for Broadley Common
Your questions about remedial sealant in Broadley Common
Will you come out to Broadley Common?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you do remedial sealant in Broadley Common?
Yes. We work across London and the South East, and Broadley Common is part of that. Just call 0345 464 0079 or email us with a few details of the job, and we will give you a clear quote.
Do you offer different sealant colours?
Most of the time, yes. We will tell you which colours the right product comes in and agree one before work begins.
How do I get a quote for remedial sealant in Broadley Common?
Every job is different, so each one gets its own quote. For a quick quote, call 0345 464 0079 or email us and let us know what needs doing and where.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
How long before the joint can be used?
Cure times vary by product and the temperature. Before we leave, we’ll tell you the cure time.
Can you reseal a split movement joint?
Yes. Backing sets the depth and stops the sealant sticking to the back.