Kent · England
Remedial sealant & repairs in Brabourne, Kent
Our applicators work in Brabourne on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.
- Beads that never stuck properly
- Mould trapped under a layer of silicone
- Gaps opening along the back of the worktop
When to call us in Brabourne
A lot of failed joints have been sealed over rather than replaced. Silicone does not bond to silicone, so the top layer lifts and water and mould collect between the two.
These are the problems we are asked about most:
- Repeat leaks from the same joint
- Kitchen joints letting water behind the worktop
- Dark patches showing through the sealant
- Movement joints that have split or pulled away
For site and facilities teams at buildings such as Brabourne Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Before booking anyone
- What happens if they find a problem under the old sealant
- Whether they seal over old material or remove it
- Whether the sealant suits the joint
- How long the guarantee is
About our remedial sealant in Brabourne
Water on the floor doesn’t always mean failed silicone. A cracked tray, a failed shower valve or a leaking waste can look just the same. If that is what we find, we’ll tell you rather than reseal something that won’t fix it. If you’re dealing with movement joints that have split or pulled away and gaps opening along the back of the worktop, we can put it right.
Around Brabourne, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Every job comes with our one-year guarantee.
- Location
- Brabourne (TN25)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Brabourne
More services for Brabourne
Remedial sealant in Brabourne: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For landlords with property near Westenhanger station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. For an older house near a landmark such as Church of St Mary, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Brabourne is about 6 miles east of Ashford, in Kent. Homes, rented property, offices and hotels in Brabourne is covered for remedial sealant, old or new, large or small. The work is guaranteed for a year. We cover 922 towns and villages across Kent. Our Chelmsford page covers work nearby (47 miles or so).
Work in TN25 works the same way as everywhere else we cover. Whether your property is on The Street and Canterbury Road or anywhere close by, we can help. We also cover the places around Brabourne: Bircholt Forstal (1 mile west), Brabourne Lees (1 mile south-west), Lilyvale (1 mile south-west), Smeeth (2 miles south-west) and Ridgeway (2 miles south-west). We also work in nearby towns such as Ashford (6 miles west), Canterbury (11 miles north), Dover (13 miles east), Folkestone (8 miles south-east), Whitstable (15 miles north) and Faversham (13 miles north).
What’s near Brabourne
Locally, jobs take us to homes and businesses close to The Five Bells pub, among other places. For rail, the closest station is Westenhanger station, roughly 3.4 miles south-east of the centre. Nearby you will also find William Harvey Hospital (3.6 miles west) and Lympne Castle (4.6 miles south). The countryside around Brabourne includes Tolsford Hill and Hatch Park.
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- A leaking trap, valve or supply pipe
- Tiles that have come away from the wall
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before booking.
What we seal
- Failed movement joints
- Expansion joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Leaking tray & enclosure joints
Aftercare tips
A little care helps the new joints last. Our advice:
- Air the bathroom so the sealant can dry
- Find out why the sealant failed first
- Clean sealant with mild products only
- Keep movement joints clear of mortar and paint
Don’t let anyone seal over it later. New silicone does not bond to old.
If a joint has failed more than once, stop resealing it. Have someone find out why, otherwise the next attempt will fail too.
FAQs for Brabourne
Will you come out to Brabourne?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do remedial sealant in Brabourne?
Yes, Brabourne is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Can tenants book the work?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
How long before the joint can be used?
Different products cure at different speeds, so please follow the time we give you.
Are you insured?
Yes. We are fully insured.
What information do you need?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Will there be a smell?
There can be a smell while the sealant cures. Opening a window helps.
Can you quote for more than one area?
Yes, we can. More than one area can be quoted together.
How we quote for remedial sealant
Every job gets its own quote. This is what makes a difference:
- Access and height
- Whether there’s mould to deal with
- The number of rooms or windows
- Whether old sealant or filler has to be cut out
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
What we need to know
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Access, such as stairs, a lift or height
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
- The address or postcode of the job
Want a quote for remedial sealant? Please call 0345 464 0079 or send us an email and tell us about the job. We’ll explain what we’d do and send you a clear quote before any work starts.
What happens on the day
On the day, we look over the joints with you first, so you know exactly what we are doing. We protect the surfaces around the joints before any work begins. The work normally takes a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere like Brabourne needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- Mould is treated and the joint dried.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
Getting ready for the visit
- Mention if the joints have been sealed before
- For indoor joints, keep the area dry beforehand if you can
- Tell us if parking is tricky
Ask for a quote
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work before giving you a price.
Related advice
Landlords, agents and businesses in Brabourne
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.