Hampshire · England
Remedial sealant & repairs in Binsted, Hampshire
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Binsted and across Hampshire. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- A shower that leaks however often it’s resealed
- Worktop sealant that has shrunk and split
- Caulk or the wrong sealant used in a wet area
Bathrooms and kitchens in Binsted
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For an older house near a landmark such as Church of the Holy Cross, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Managing a site like Binsted Church of England Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. If you let a flat or house near Bentley (Hampshire) station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Binsted is about 4 miles east of Alton, in Hampshire. Every kind of property in Binsted can book us for remedial sealant. Every job comes with our 12-month guarantee. Binsted is one of 683 places in Hampshire we cover. You can also see our page for Reading, about 20 miles away.
All of GU34 is covered for remedial sealant. If you need remedial sealant at a property on The Street and Lovell Gardens or anywhere close by, our applicators can take on the job. We also cover the places around Binsted: Isington (1 mile north), Blacknest (1 mile north-east), Bucks Horn Oak (2 miles east), Frithend (2 miles east) and Kingsley (2 miles south). Within a short drive, we also cover Basingstoke (12 miles north-west), Farnborough (10 miles north-east), Fleet (8 miles north), Aldershot (8 miles north-east), Alton (4 miles west) and Petersfield (11 miles south).
What’s near Binsted
Locally, jobs take us to homes and businesses close to The Binsted Inn. The closest station to Binsted is Bentley (Hampshire) station, about 1.5 miles north-east. Well-known places in the area include Allen Gallery (3.8 miles west) and Chase Community Hospital (4.2 miles south). Open spaces near Binsted include Holybourne Hill and Deadwater Valley.
Remedial sealant for homes and businesses in Binsted
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We’re fully insured ARBOMaster approved applicators, and every remedial job comes with a 12-month guarantee. If you have caulk or the wrong sealant used in a wet area and leaks that keep coming back after resealing, we can help, whatever the surface.
Homes around Binsted are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Location
- Binsted (GU34)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Common questions in Binsted
Is Binsted in your area for remedial sealant?
Yes. We work across London and the South East, and Binsted is part of that. You can call 0345 464 0079 or drop us an email and tell us what needs doing.
Do you work for landlords with property near Bentley (Hampshire) station?
Yes, we work for letting agents and landlords. Just phone 0345 464 0079 or email us and tell us about the property, and we will give you a clear price.
What happens if the problem is the tray or the plumbing?
We’ll tell you. A cracked tray, faulty valve or leaking waste needs a different trade, and we won’t reseal for the sake of it.
Will there be a smell?
Possibly a little. Any smell clears as the sealant cures.
Can you fix a reseal that hasn’t worked?
Yes, usually. First we check whether the leak is the sealant at all, then strip and reseal the joints.
Can you take off two layers of silicone?
Yes. Both layers come out; new silicone does not bond to old silicone, which is why over-sealing fails.
Is it worth trying it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Can you reseal a split movement joint?
Yes. Failed movement joints are cut out and resealed with backing and a flexible sealant suited to the movement.
How we quote for remedial sealant
The price is agreed before any work begins. It takes into account:
- The type of sealant required
- The number and length of the joints
- Whether the work is at height
- Mould in or behind the old joints
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we’ll go through it with you.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- Any access issues, like height or stairs
- Pictures of the joints, sent by email
- Where the job is, and your postcode
- The rough size of the job
We quote each job on its own, so start by telling us what you need. Just phone 0345 464 0079 or drop us an email with the details, and pictures are welcome.
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Clean sealant with mild products only
- Air the bathroom so the sealant can dry
- Report a tray that rocks or a worktop that lifts
- Deal with small splits early
Where we’ve pointed out another fault, have it put right, or the new joint may fail again.
If a joint has failed more than once, stop resealing it. Have someone find out why, or the next bead will go the same way.
How it works
When we arrive, we start by going over the job with you. We protect the surfaces around the joints before any work starts. Most jobs take a few hours, depending on how many layers have to come out. Somewhere like Binsted needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We look at how the sealant has failed and check for movement or a leak path.
- All the old sealant comes out, including any layers underneath.
- We clean the joint, treat any mould and let it dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- The new joint is tooled neatly and we explain anything else we found.
How to prepare
- Let us know about earlier repairs to the joints
- Plan for the work area to be out of bounds to pets and children
- Tell us if parking is tricky
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved before giving you a price.
Read more
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Also in Binsted
Landlords, agents and businesses in Binsted
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
How the job changes by surface
Over-sealed & botched joints
Previous removal attempts can leave scratches or gouges. We take care not to make it worse, and tell you about any damage we find.
Worktops & kitchens
Kitchen joints hold grease and residue, so cleaning takes longer than in a bathroom before resealing.
What happens if it’s left?
Another bead over the top will not fix a failed joint. It doesn’t grip the old layer, so the leak carries on and there’s now more to remove. Around Binsted, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
The cost depends on how much there is to do, how hard the old material is to remove and access to the work. We give a clear quote before we start, so you know where you stand.
Why book with us
- We never seal over old sealant
- 4.9 on Google from 180+ five-star reviews
- White, clear, grey or coloured to suit, where the product allows
- Trusted Arbo and Everbuild sealants