Essex · England
Remedial sealant & repairs in Balls Green, Essex
We cover Balls Green for removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Decorators’ caulk around a bath or shower
- Black mould underneath the bead
- Sealant peeling off a dusty or damp surface
Different surfaces, different methods
Movement & expansion joints
Movement joints in floors, walls and façades need a flexible sealant set to the right depth. We remove the failed sealant, fit backing and reseal with a low-modulus product.
Leaking trays & enclosures
Where the joints are the problem, every bead is stripped and resealed with anti-fungal sanitary silicone, including the screen profile and tray edges.
How we handle remedial sealant in Balls Green
Remedial jobs in Balls Green usually fall into a few patterns: over-sealed joints, hidden mould, repeat leaks and split movement joints. Each is stripped back and done again properly. We are often asked to deal with sealant applied over old sealant that has lifted and sealant that came away because the surface wasn’t prepared, across failed movement joints, expansion joints and shrunken worktop sealant.
Being in a small place like Balls Green makes no difference to the job itself: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Place
- Balls Green (CO7)
- Region
- Essex
- Cover
- A year, on every job
- Quote
- A clear price before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Towns and villages near Balls Green
More services for Balls Green
What we can’t put right
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Failed tanking or loose tiles behind the sealant
- Cracks in the fitting rather than the joint
- Older mastics that may need an asbestos check before removal
If you’re not sure, just phone 0345 464 0079 or send us an email and we’ll give you a straight answer.
What we seal
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Expansion joints
- Failed movement joints
- Leaking tray & enclosure joints
Remedial sealant around Balls Green
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
For landlords with property near Great Bentley station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Balls Green is about 6 miles east of Colchester, in Essex. Across the CO7 area, we cover remedial sealant for homes and businesses. Across Essex, we cover 644 places, Balls Green among them. We also work in Chelmsford, about 25 miles from Balls Green.
Jobs for remedial sealant in CO7 is quoted and booked the same way as anywhere else. Whether your property is on Frating Road, Chapel Lane and Brundells Road or anywhere close by, our applicators can take on the job. Close by, we work in Hare Green (1 mile north), Frating Green (1 mile south), Cowey Green (1 mile north), Frating (1 mile south-west) and Great Bromley (1 mile north). Larger places within reach include Colchester (6 miles west), Clacton-on-Sea (7 miles south-east), Harwich (10 miles east), Camulodunum (7 miles west), Greenstead (4 miles west) and Tiptree (13 miles west).
Around Balls Green
Typical jobs here are in homes near Snooty Fox pub and the streets around them. For rail, the closest station is Great Bentley station, roughly 2.1 miles south-east of the centre. A little further out are Wivenhoe Chapel Museum (3.3 miles west). The countryside around Balls Green includes Cockaynes Wood.
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
How we quote for remedial sealant
For a quick quote, just ask. What matters most is:
- How much old sealant there is and how hard it is to remove
- When we can work, for business premises
- The number and length of the joints
- The product the joint needs
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
What to tell us for a quote
When you call or email, it’s useful to know:
- Access, such as stairs, a lift or height
- The type of property
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
Want a quote for remedial sealant? Please ring 0345 464 0079 or send us an email and tell us about the job. We will explain what we’d do and give you a clear quote before work begins.
Do you need remedial sealant in Balls Green?
Products get mixed up: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. None of them last.
Any of these means the joints need attention:
- Kitchen joints letting water behind the worktop
- Beads that never stuck properly
- Movement joints that have split or pulled away
- Wide, uneven beads that look worse than the old ones
Around Balls Green, as everywhere, remedial sealant is only as good as the preparation behind it.
Questions to ask before you book
- What preparation is included
- How hidden problems are handled
- Whether VAT is included
- How much experience the applicator has
Your questions about remedial sealant in Balls Green
Do you cover Balls Green for remedial sealant?
Yes. Our work covers London and the South East, and Balls Green is part of that. Just ring 0345 464 0079 or email us with a few details of the job.
Do you cover smaller places like Balls Green?
Yes, Balls Green is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do the sealants smell?
It depends on the product. Some smell for a while, some hardly at all.
How do I get a quote for remedial sealant in Balls Green?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. Our applicators cover Balls Green.
Can tenants book the work?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you guarantee remedial jobs?
Yes. You get our 12-month guarantee.
Can failed expansion joints be resealed?
Yes. Where mortar or filler has been used instead of sealant, it’s removed where it can be, and reseal with a flexible product.
How it works
Good joint work is mostly preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. In total, it usually takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere as small as Balls Green, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you are told about anything else we found.
How to prepare
- Move anything stored near the joints
- Mention any leaks or damp you’ve noticed
- Mention any sign-in or site rules at work premises
Getting a quote
If you are in Balls Green and need remedial sealant, call 0345 464 0079 or email us. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Advice
Aftercare tips
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Run the fan after every shower
- Use a soft cloth, not a scourer, on silicone
- Act on a lifting corner right away
- Never seal over old silicone
Leave the new joint to cure fully before it gets wet or moves: generally around 24 hours, or as long as we advise.
Mould under a second layer of sealant keeps growing out of sight. By the time it shows through, the joint is well past saving.