Highland · Scotland
Remedial Sealant in Ardvasar
We cover Ardvasar for removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Thick, messy sealant smeared over tiles
- Movement joints that have split or pulled away
- Worktop sealant that has shrunk and split
How we handle remedial sealant in Ardvasar
A movement joint stops working when its sealant splits or sets hard. We cut out the failed sealant and set the depth with backing, then a flexible sealant matched to the movement goes in. Common call-outs are for sealant that came away because the surface wasn’t prepared and thick, messy sealant smeared over tiles, on failed movement joints, leaking tray & enclosure joints and expansion joints.
A bathroom in a place like Ardvasar gets the same daily wear as one in a city flat. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
You get a 12-month guarantee, the same in Ardvasar as everywhere else we work.
- Location
- Ardvasar (IV45)
- Wider area
- Highland
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
DIY versus a professional finish
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
Common problems we fix in Ardvasar
All sealant wears out eventually. Mould grows into the silicone, the surface hardens and the bead shrinks. Then the only fix is removal and a new bead.
The most common problems we see are:
- Over-sealed joints coming away
- Wide, uneven beads that look worse than the old ones
- Floor or wall movement joints that have failed
- Beads that never stuck properly
Around Ardvasar, as everywhere, remedial sealant is only as good as the preparation behind it.
What your quote should include
- What the cure time is
- What the quote includes, VAT included or not
- What happens if they find a problem under the old sealant
- Whether you can choose the colour
What affects the cost of remedial sealant
For a quick quote, just ask. What matters most is:
- Any mould that needs treating
- Any working-time requirements on site
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Asking for a quote
There’s no need for technical detail. Just tell us:
- Photos by email, if that is easy
- The rough size of the job
- Any previous sealing or DIY work
- The problem you’ve noticed
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll come back to you with a quote.
What happens on the day
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes a few hours for most joints, depending on how much old sealant has to come out, depending on the size of the job. Somewhere like Ardvasar may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First we find out how and where the joint has failed.
- Every layer of old sealant is cut and cleaned out.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- Finally we finish the joint and talk you through what we found.
How to prepare
- Keep children and pets away from the work area
- Tell us about access, such as stairs, a lift or high-level joints
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
We quote each job on its own, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details and send photos if you have them.
Read more
Different surfaces, different methods
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. It’s cut out, degreased and resealed in a colour to suit.
Leaking trays & enclosures
Where the joints are the problem, every bead is stripped and resealed with anti-fungal sanitary silicone, including the screen profile and tray edges.
Aftercare tips
No joint lasts for ever, but care makes a real difference. Our tips:
- Look for stains below bathrooms now and then
- Find out why the sealant failed first
- Keep bleach and abrasives off the bead
- Don’t wait for a small gap to become a leak
Watch the joint over the first few weeks, especially if movement was the problem. If anything changes, just email us at info@mrmastic.co.uk.
If a joint has failed more than once, stop resealing it. Get the cause found first, or the next bead will go the same way.
What remedial sealant looks like in Ardvasar
Ardvasar is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
Rented homes near Mallaig station change hands often, and a joint that keeps failing is best fixed properly while the property is empty.
Ardvasar (Gaelic: Àird a' Bhasair) is in Highland. We provide remedial sealant to householders, landlords and businesses in Ardvasar and the surrounding area, as part of our work across Highland. We cover 253 towns and villages across Highland.
Every address in IV45 is covered for remedial sealant. Streets in the area include Newton Bank and Dail Conaisg, and we cover them all. We also cover Armadale (1 mile north-east), Kilbeg (2 miles north-east), Mallaig (5 miles south-east), Morar (7 miles south-east) and Glenancross (7 miles south). For island and remote addresses, the job takes a little more planning.
Landmarks near Ardvasar
The closest station to Ardvasar is Mallaig station, about 4.7 miles south-east. Nearby you will also find Museum of the Isles (1 mile north) and Armadale Castle (1.1 miles north-east). Not far away are Sgùrr nan Caorach and Loch Sgurr na Caorach.
What else we do in Ardvasar
Honest limits
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- Tiles that have come away from the wall
- A bath, tray or worktop that moves until it’s properly fixed
- A leaking trap, valve or supply pipe
If you are not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer before booking.
Where we work in Ardvasar
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Expansion joints
- Shrunken worktop sealant
- Failed movement joints
- Leaking tray & enclosure joints
FAQs for Ardvasar
Do you cover Ardvasar for remedial sealant?
Yes, Ardvasar is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
Can you help a landlord with a rental near Mallaig station?
Yes, rental work is part of what we do. You can drop us a line at info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before work begins.
Are you insured?
Yes. We are fully insured.
Do you fix expansion and movement joints?
Yes. Where mortar or filler has been used instead of sealant, it’s removed where it can be, and reseal with a flexible product.
Do you work for hotels and businesses?
Yes. We can plan bigger jobs in stages to suit the site.
Can you quote for more than one area?
Yes. Just list everything you need.
What do you need from me for a quote?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Will you leave a mess?
No. The area is protected while we work and cleaned up afterwards.