Kent · England
Aldington Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for Aldington, backed by a one-year guarantee. Call for a quick quote.
- Sealant peeling off a dusty or damp surface
- Wide, uneven beads that look worse than the old ones
- Worktop sealant that has shrunk and split
What we are called out for in Aldington
Using the wrong product is a common cause: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. None of them last.
Look out for any of the following:
- Beads that never stuck properly
- Decorators’ caulk around a bath or shower
- Gaps opening along the back of the worktop
- Repeat leaks from the same joint
Schools such as Aldington Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Comparing quotes
- How hidden problems are handled
- How much experience the applicator has
- What guarantee comes with the work
- How long to leave it before use
Remedial sealant for homes and businesses in Aldington
A movement joint stops working when its sealant splits or sets hard. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. Common call-outs are for black mould underneath the bead and sealant that came away because the surface wasn’t prepared, on expansion joints, failed movement joints and botched or over-sealed joints.
For a small place like Aldington, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
A 12-month guarantee comes as standard.
- Place
- Aldington (TN25)
- Wider area
- Kent
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Towns and villages near Aldington
Also in Aldington
Remedial sealant in Aldington: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Ham Street station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. Homes close to Church of St Martin include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Aldington is about 5 miles south-east of Ashford, in Kent. From the centre of Aldington to the outskirts, remedial sealant is available for homes and businesses alike. Aldington is one of 922 towns and villages in Kent we cover for remedial sealant. We also work in Crawley, around 49 miles away.
Every address in TN25 is covered for remedial sealant, from the main roads to the quietest streets. Remedial sealant is available to properties on Earlsfield, Walnut Ridge and Badgers Close. If you are just outside Aldington, we cover Clap Hill (1 mile north-west), Stonestreet Green (1 mile north), Bonnington (1 mile south-west), Postling Green (1 mile south-east) and Aldington Frith (1 mile west). Further out, we also cover Ashford (5 miles north-west), Canterbury (14 miles north-east), Folkestone (10 miles east), Hythe (6 miles east), Preston (15 miles north) and Hawkinge (10 miles east).
Near you in Aldington
Around Aldington, our work takes us to homes and buildings near Walnut Tree Inn and Poulton Wood and the streets around them. The nearest railway station is Ham Street station, about 4.1 miles south-west. Other landmarks nearby include Lympne Castle (3.8 miles east) and William Harvey Hospital (3.6 miles north). Green spaces nearby include Hatch Park.
What affects the quote in Aldington
You will get a clear quote before we start. It takes into account:
- How many areas need sealing
- The size of the job
- How easy the joints are to reach
- When we can work, for business premises
Combining jobs into one visit usually makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.
Asking for a quote
Before you ask for a quote, have a think about:
- Whether it has been sealed before
- The problem you’ve noticed
- Any access issues, like height or stairs
- Where the property is
Need a quote? Please phone 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Surface by surface
Over-sealed & botched joints
Previous removal attempts can leave scratches or gouges. We take care not to make it worse, and point out any existing damage.
Leaking trays & enclosures
If the tray is cracked, or the leak is from the valve or waste, sealant will not fix it. We say so rather than reseal.
What happens if it’s left?
A failed seal rarely means a new bathroom. When the fittings are sound, stripping and resealing the joints is often enough. Where something else has failed, you will hear it from us. Around Aldington, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
The cost depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Why us?
- ARBOMaster approved applicator
- 20+ years of sealant experience
- Sanitary silicone with an anti-fungal additive in wet areas
- You choose the colour before work begins
Take a look at what affects the cost and customer reviews.
Aftercare tips
After the cure time, these simple habits help:
- Deal with small splits early
- Get the cause of a repeat leak found before resealing
- Look for stains below bathrooms now and then
- Report a tray that rocks or a worktop that lifts
Keep an eye on the joint at first, especially if movement was the problem. Should anything change, ring 0345 464 0079 or drop us an email.
Mould trapped under over-sealed joints spreads unseen. By the time it shows through, the joint is well past saving.
Common questions in Aldington
Is Aldington within the area you cover?
Yes. Aldington is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work for landlords with property near Ham Street station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We will tell you what we are using and why.
Can you remove sealant that’s been put over old sealant?
Yes. Each layer is cut out and the residue cleaned off, then the joint is resealed once.
Do you work for hotels and businesses?
Yes. Hotels, offices and other businesses use us, and we are fully insured.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint.
How much does remedial sealant cost in Aldington?
Size, access and the old material all affect the cost. Call for a quick quote and we’ll talk you through it.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
How it works
On the day, we look over the joints with you first, so you know exactly what we are doing. Surfaces next to the work are protected before any work begins. Most jobs take a few hours, depending on how many layers have to come out. Somewhere as small as Aldington, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by checking the joint for movement, leaks and the reason it failed.
- All the old sealant comes out, including any layers underneath.
- Next, any mould is treated and the joint dried.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- Finally we finish the joint and talk you through what we found.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- Let us know if you’ve seen damp or leaks
- Mention any parking rules near the property
How to get a quote
Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job.