Kent · England
Remedial Sealant in Aldington Frith
Removing failed, mouldy or leaking sealant and putting it right in Aldington Frith, with a 12-month guarantee on every job. Call for a quick quote.
- Repeat leaks from the same joint
- Sealant peeling off a dusty or damp surface
- Dark patches showing through the sealant
What we can’t put right
Some problems need a builder, plumber or other trade rather than us:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A cracked shower tray or bath (that needs repair or replacing)
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
If you are not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer before you book.
Surfaces we seal
- Botched or over-sealed joints
- Shrunken worktop sealant
- Expansion joints
- Mouldy bath & shower sealant
- Failed movement joints
- Leaking tray & enclosure joints
Remedial sealant for homes and businesses in Aldington Frith
In Aldington Frith, as anywhere, remedial jobs tend to look alike: over-sealed joints, hidden mould, repeat leaks and split movement joints. We strip each one back and start from scratch. If you’re dealing with beads that never stuck properly and leaks that keep coming back after resealing, we can put it right, whatever the surface.
For a small place like Aldington Frith, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
All our work comes with our one-year guarantee, wherever you are in Kent.
- Where
- Aldington Frith (TN25)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
How the visit works
When we arrive, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before any work begins. The work generally takes a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere like Aldington Frith needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we find out how and where the joint has failed.
- Every layer of old sealant is cut and cleaned out.
- We clean the joint, treat any mould and let it dry.
- We use the right backing and sealant for any joint that moves.
- We tool the joint and tell you about anything else that needs attention.
How to prepare
- Where the joints are inside, avoid wetting them before we arrive
- Tell us about any previous sealing or DIY attempts
- Mention any leaks or damp you’ve noticed
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Related advice
Landlords, agents and businesses in Aldington Frith
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Common problems we fix in Aldington Frith
Joints that move need sealant that can stretch. A bath that flexes, a tray that rocks or a building joint that opens and closes split any bead that is too stiff or too thin.
Keep an eye out for these signs:
- Sealant applied over old sealant that has lifted
- Decorators’ caulk around a bath or shower
- Sealant peeling off a dusty or damp surface
- Smears and lumps from a botched reseal
Around Aldington Frith, as everywhere, remedial sealant is only as good as the preparation behind it.
What to look for in a quote
- How the colour is chosen
- When the joint can take water or movement
- How the surfaces are prepared before sealing
- Who turns up on the day
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. Our tips:
- Run the fan after every shower
- Always have old sealant cut out, not covered
- Check trays and worktops don’t move
- Do not wait for a small gap to become a leak
Clean gently: no scraping, scouring pads or harsh chemicals.
If a joint has failed more than once, stop resealing it. Have someone find out why, or the next bead will go the same way.
Remedial sealant around Aldington Frith
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For landlords with property near Ham Street station, botched sealant from a previous quick fix is easier to strip out between tenants.
Aldington Frith is about 4 miles south-east of Ashford, in Kent. Jobs in Aldington Frith get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. We cover 922 towns and villages across Kent, large and small. Crawley is on our list too, around 48 miles away.
Work in TN25 works the same way as everywhere else we cover. That includes homes and businesses on Frith Road, Bourne Road and Priory Road. Other places close to Aldington Frith include Bonnington (1 mile south-east), Clap Hill (1 mile east), Aldington (1 mile east), Stonestreet Green (1 mile east) and Postling Green (2 miles south-east). We also work in nearby towns such as Ashford (4 miles north-west), Canterbury (15 miles north-east), Folkestone (11 miles east), Faversham (15 miles north), Hythe (7 miles east) and Preston (15 miles north).
What’s near Aldington Frith
Typical jobs here are in homes near Poulton Wood and the streets around them. Aldington Frith’s nearest station is Ham Street station, about 3.3 miles south-west. Other landmarks nearby include Ashford Designer Outlet (3.4 miles north-west) and Lympne Castle (4.9 miles east). Not far away are Hatch Park.
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Why deal with it now?
Spraying mould remover on a sealed-over joint doesn’t reach what’s underneath. Removal is the only way to get at it, and the joint treated and dried before resealing. In a small place like Aldington Frith, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Why us?
- Fully insured
- A choice of colours where the product allows
- More than 20 years in sealant work
- Homes, businesses and hotels
Your questions about remedial sealant in Aldington Frith
Is Aldington Frith in your area for remedial sealant?
Yes, Aldington Frith is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear price.
I let a flat near Ham Street station. Can you help?
Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear price.
Where do you work from?
Our base is Crawley. We work across South East England, London and Scotland.
How long before the joint can be used?
Cure times vary by product and the temperature. Before we leave, we will tell you the cure time.
Can you match the sealant colour?
Usually, yes. White, clear and grey are common, and other colours are available, and we agree the colour with you before we start.
Are you ARBOMaster approved?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and you will get one quote.
Do you remove the old sealant?
Yes, every time. New sealant won’t bond properly to old, so the joint is cleaned back first.