Kent · England
Silver Street Regrouting
Regrouting for Silver Street, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Dirty, worn grout on a tiled floor
- Corners filled with grout instead of silicone
- Old grout in a dated colour
When to call us in Silver Street
Movement behind the tiles cracks grout. That can be a loose tile, a flexing floor or a stud wall, which is why we check the tiles first.
Any of these means the joints need attention:
- Floor grout that won’t come clean
- Grout that stays dark however much it’s cleaned
- Greasy, stained grout behind the hob
- Good tiles let down by tired grout
For an older house near a landmark such as Church of St John the Baptist, walls and floors in older homes can move, and sealant and grout show it first.
Comparing quotes
- What happens if the job turns out different
- Whether VAT is included
- What insurance they hold
- Is the old sealant removed completely?
Regrouting for homes and businesses in Silver Street
A grout colour change can freshen a room without retiling. Light grout can go darker to hide marks or back again. Just mention the colour you’d like when you call 0345 464 0079 or email us. We’re often asked to deal with cracked grout along the bath or tray and splashback grout that has darkened, on kitchen splashbacks, tiled floors and shower walls.
Somewhere as small as Silver Street, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Every job comes with our 12-month guarantee.
- Where
- Silver Street (ME9)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Silver Street homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
If you look after a building such as Bredgar Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. If you let a flat or house near Sittingbourne station, clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Silver Street is about 3 miles south-west of Sittingbourne, in Kent. Wherever you are in the ME9 postcode area, our applicators can take on regrouting. Silver Street is one of 922 places in Kent where we work. For nearby work, see our Chelmsford page, about 31 miles away.
Every address in ME9 is within our area for regrouting, from the main roads to the quietest streets. We also cover the places around Silver Street: Bredgar (1 mile east), Oad Street (1 mile north-west), South Green (2 miles west), Danaway (2 miles north-west) and Chestnut Street (2 miles north). Within a short drive, we also cover Maidstone (8 miles south-west), Ashford (14 miles south-east), Sittingbourne (3 miles north-east), Whitstable (15 miles east), Faversham (8 miles east) and Minster (9 miles north-east).
Local landmarks in Silver Street
Typical jobs here are in homes near Westlands School and Cromers Wood, among other places. The closest station to Silver Street is Sittingbourne station, roughly 2.8 miles north-east of the centre. Well-known places in the area include Sittingbourne Heritage Museum (2.9 miles north-east) and Bayford Court (3.1 miles north-east). Green spaces nearby include Detling Hill.
Questions from Silver Street
Do you work for landlords with property near Sittingbourne station?
Yes. We work for landlords and letting agents as well as homeowners. Just phone 0345 464 0079 or email us with the address and what needs doing, and we’ll send you a clear quote.
Is Silver Street in your area for regrouting?
Yes. Our work covers London and the South East, and Silver Street is part of that. You can ring 0345 464 0079 or drop us an email and let us know what needs doing, and we’ll send you a clear quote.
Will there be a smell?
Possibly a little. Any smell clears as the sealant cures, and ventilation helps.
When can I use the shower again?
We give you a time before we leave. It depends on the grout and the sealant used, so follow the time we give you.
Can new sealant go over the old?
No, it won’t last. It can look neat for a few weeks, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Is resealing included with regrouting?
Normally we do both. Grout fills tile gaps and sealant handles the moving joints, so both are renewed and it’s all in the quote.
How do I get a quote for regrouting in Silver Street?
Size, access and the old material all affect the cost. Ask us for a quote and we will talk you through it.
Are you fully insured?
Yes. We’re fully insured.
Landlord and commercial work in Silver Street
We also work for property managers and facilities teams. We can quote a run of properties together.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Clean grout with a mild bathroom cleaner
- Don’t use strong acidic cleaners on grout
- Clean with a soft brush, not anything metal
- Have loose tiles looked at early
A squeegee or cloth over the tiles after use stops soap and water sitting on the grout. Run the extractor fan or open a window so the grout dries between uses.
Once grout cracks, it tends to get worse. Water gets in behind and the tiles can start to loosen, so regrouting early can save a retile.
What happens if it’s left?
Once grout cracks, water can get behind the tiling. Left alone, that water can loosen tiles or damage the wall, and then you are looking at retiling. Sorting it early keeps the job simple. In a small place like Silver Street, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
Why us?
- We leave the area clean and tidy
- Homes, businesses and hotels
- We never seal over old sealant
- We are fully insured
Towns and villages near Silver Street
Also in Silver Street
Quotes for regrouting in Silver Street
We don’t publish a price list, because no two jobs are the same. What we look at:
- Working hours on commercial sites
- How easy the joints are to reach
- The type of sealant required
- How many rooms, windows or areas are involved
What you pay reflects the work, not a rough estimate. That is why we ask about the job first.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- Whether it has been sealed before
- Photos by email, if that’s easy
- If it’s domestic, commercial or a hotel
- Where the job is, and your postcode
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear price for your job. To get started, phone 0345 464 0079 or email us.
The process
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for a shower enclosure, longer for a whole room. Somewhere as small as Silver Street, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by checking the tiles for any that are loose or hollow.
- Old grout is raked out to a consistent depth without chipping the tiles.
- We vacuum the joints and clean out the dust.
- We fill the joints with new grout, then clean the tiles.
- The corners and edges get new silicone, because grout there would crack.
How to prepare
- Try not to wet indoor joints just before the visit
- Tell us if parking is tricky
- Move anything stored near the joints
How to get a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work before giving you a price.