Oxfordshire · England
Shiplake Regrouting
Our applicators work in Shiplake on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Grout in a colour the owner wants to change
- Cracked or crumbling grout lines
- Floor grout that won’t come clean
Surface by surface
Corners and edges
Corners flex as the building moves, so we seal them rather than grout them.
Bathroom wall tiles
Splash areas around basins and baths stain first. We can do part of a wall or all of it.
About our regrouting in Shiplake
Grout is the filler between your tiles, while sealant goes where tiles meet a bath, tray or worktop. When grout cracks or washes out, water has a way in behind the tiling. We rake it out and replace it and renew the silicone at the edges. Common call-outs are for good tiles let down by tired grout and a grout colour that no longer suits the room, across tiled floors, shower walls and kitchen splashbacks.
In a village or hamlet like Shiplake, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Location
- Shiplake (RG9)
- Wider area
- Oxfordshire
- Cover
- One year on every job
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
We also work for property managers and facilities teams in Shiplake and across Oxfordshire. Several sites can go on one quote, and we’re fully insured.
Regrouting in Shiplake: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Letting a property close to Wargrave station? Then a regrout while the flat is empty is quicker than working around a tenant. Managing a site like Shiplake Church of England School? Then we reseal washrooms and kitchens in schools and businesses as well as homes. Homes close to Church of St Peter and St Paul include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Shiplake is about 3 miles north of Woodley, in Oxfordshire. We carry out regrouting for homes and businesses in Shiplake and nearby, as part of our work across Oxfordshire. Shiplake is one of 443 towns and villages in Oxfordshire where we work.
We work across RG9 for regrouting. If you are just outside Shiplake, we cover Charvil (2 miles south), Twyford (2 miles south-east), Ruscombe (2 miles south-east), Hare Hatch (2 miles east) and The Holt (3 miles east). Further out, we also cover Benson (12 miles north-west), Chinnor (14 miles north), Tilehurst (7 miles south-west), Wallingford (12 miles north-west), Little Heath (7 miles west) and Oakley (14 miles north).
What’s near Shiplake
In Shiplake, that means homes and buildings near The Plough pub, Blessed Hugh Faringdon Catholic School and Loddon Nature Reserve and the streets around them. Shiplake’s nearest station is Wargrave station, about 0.9 miles east. Nearby you’ll also find Royal Berkshire Hospital (4.2 miles south-west) and Frazer Nash Archives (2.1 miles north). The countryside around Shiplake includes South Lake and Sonning Hill.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
How it works
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes a few hours, or longer for a fully tiled room and we leave things clean and tidy. Somewhere like Shiplake needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First, we check for loose or hollow tiles and point out any we find.
- Old grout is raked out to a consistent depth without chipping the tiles.
- The joints are vacuumed and cleaned.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- Corners and edges are resealed with flexible silicone, not grout.
How to prepare
- Tell us if parking is tricky
- Try not to wet indoor joints just before the visit
- Mention any leaks or damp you’ve noticed
Get a quote
For regrouting in Shiplake, ring 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you will get a clear quote before any work starts.
Related advice
Leave it or put it right?
Cleaning products may brighten grout for a time, but stains and mould that have soaked in tend to return. New grout, with silicone in the corners, deals with the cause. Older cottages and farmhouses around Shiplake can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part.
What you get with us
- Full insurance on every job
- Quality sealants from Arbo and Everbuild
- One-year guarantee on every job
- Domestic, commercial and hotel work
What affects the cost of regrouting
We do not publish a price list. The quote depends on:
- The number of rooms or windows
- Whether the work is at height
- Any working-time requirements on site
- The old material and how stubborn it is
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first and give you a clear quote before we start.
What we need to know
Photos by email are helpful but not essential. Please mention:
- Whether it’s a home or a business
- A few photos by email, if you can
- Any previous sealing or DIY work
- The rough size of the job
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
FAQs for Shiplake
Is Shiplake within the area you cover?
Yes, Shiplake is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
I let a flat near Wargrave station. Can you help?
Yes, we work for landlords and letting agents. You can call 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before we start.
Can you regrout just the shower?
Yes. Many jobs are just the shower walls, or just the joints that have failed.
How much does regrouting cost in Shiplake?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote and we’ll talk you through it.
When can I use the shower again?
We will tell you on the day. The wait depends on the products and conditions, so follow the time we give you.
Is there any odour?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
Can you work on commercial sites?
Yes, regularly. We can plan bigger jobs in stages to suit the site.
Do you take out the old sealant first?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Aftercare tips
To keep the joints looking good and working properly:
- Stick to mild products for cleaning grout
- Keep harsh bleach and acid cleaners off the grout
- Run the extractor fan during and after a shower
- Give the walls a quick rinse after use
A squeegee or cloth over the tiles after use keeps water off the grout. Run the extractor fan or open a window to help it dry out.
Leaving failed grout can mean tiles come loose. Once that happens, regrouting will not fix it so early action pays.