Oxfordshire · England
Remedial sealant & repairs in Shiplake, Oxfordshire
Removing failed, mouldy or leaking sealant and putting it right for Shiplake, backed by a 12-month guarantee. Call for a quick quote.
- Sealant peeling off a dusty or damp surface
- Worktop sealant that has shrunk and split
- Thick, messy sealant smeared over tiles
How the visit works
At the end, we look at the finished work together and explain the cure time. The visit itself normally takes a few hours, depending on how many layers have to come out, depending on the size of the job. In a small place like Shiplake, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
How to prepare
- Tell us about any water getting in
- Keep children and pets away from the work area
- For business premises, tell us about site rules or sign-in
Ask for a quote
For a quote, ring 0345 464 0079 or email us with the location and a short description of the problem. You will have a clear quote before any work starts.
Advice
About our remedial sealant in Shiplake
Water on the floor doesn’t always mean failed silicone. A cracked tray, a failed shower valve or a leaking waste can look just the same. If that’s what we find, we’ll tell you rather than reseal something that will not fix it. If you’re dealing with thick, messy sealant smeared over tiles and worktop sealant that has shrunk and split, we can help, whatever the surface.
For a small place like Shiplake, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we will put it right.
- Where
- Shiplake (RG9)
- Region
- Oxfordshire
- Cover
- One year on every job
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Surface by surface
Mouldy bath & shower sealant
Mould often spreads under the bead as well as through it. We treat the exposed joint once the bead is out so the new sealant starts clean.
Over-sealed & botched joints
A botched joint can hide two or three layers of sealant, including the smears and film on surrounding tiles. New sealant needs a fully clean surface.
Aftercare tips
Looking after new joints is easy, and it makes a real difference:
- Don’t add new sealant on top of old
- Keep an eye on the ceiling below the bathroom
- Have loose fittings fixed before resealing
- Don’t point over movement joints
Give the new sealant its full cure time: normally around 24 hours, or as long as we advise.
Warning signs: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Any of them means it’s time for remedial work.
Towns and villages near Shiplake
Other services in Shiplake
Should I try it myself first?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Remedial sealant in Shiplake: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Wargrave station? Then a joint that keeps failing is best fixed properly while the property is empty. If you live in an older home near Church of St Peter and St Paul, walls and floors in older homes can move, and sealant and grout show it first.
Shiplake is about 3 miles north of Woodley, in Oxfordshire. Every kind of property in Shiplake can book us for remedial sealant. Every job comes with our 12-month guarantee. Shiplake is one of 443 towns and villages in Oxfordshire where we work.
Postcode districts we cover here for remedial sealant: RG9. Other places close to Shiplake include Charvil (2 miles south), Twyford (2 miles south-east), Ruscombe (2 miles south-east), Hare Hatch (2 miles east) and The Holt (3 miles east). Further out, we also cover Benson (12 miles north-west), Chinnor (14 miles north), Tilehurst (7 miles south-west), Wallingford (12 miles north-west), Little Heath (7 miles west) and Oakley (14 miles north).
Landmarks near Shiplake
Typical jobs here are in homes near The Plough pub, Blessed Hugh Faringdon Catholic School and Loddon Nature Reserve, among other places. For rail, the closest station is Wargrave station, about 0.9 miles east of the centre. Other landmarks nearby include Royal Berkshire Hospital (4.2 miles south-west) and Frazer Nash Archives (2.1 miles north). Not far away are South Lake and Sonning Hill.
What we cannot put right
We’d rather tell you now than do work that will not last, so these are the limits:
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- Cracks in the fitting rather than the joint
- A leaking trap, valve or supply pipe
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly.
What we seal
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Expansion joints
- Botched or over-sealed joints
- Failed movement joints
Landlords, agents and businesses in Shiplake
We work for landlords and letting agents as well as homeowners. Sealant work between tenants keeps a property looking cared for.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Shiplake questions
Can you do remedial sealant in Shiplake?
Yes, Shiplake is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or email us and tell us what needs doing.
Can you help a landlord with a rental near Wargrave station?
Yes. We work for landlords and agents as well as householders, and several properties can go on one quote. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we will send you a clear quote.
Does remedial work come with a guarantee?
Yes. You get our 12-month guarantee, and we are fully insured.
Does someone need to be in?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
How long will it take to strip and reseal the joint?
Longer than a simple reseal, because every layer has to come out. For most joints, it’s a few hours, and we confirm the time with your quote.
Can you match the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.
Signs you need remedial sealant in Shiplake
Water from somewhere else can ruin a good seal. A leaking valve, a failed waste or cracked grout feeds water behind the bead, and the sealant lifts or goes mouldy from underneath.
The problems people normally mention when they call include:
- Caulk or the wrong sealant used in a wet area
- Wide, uneven beads that look worse than the old ones
- Sealant that came away because the surface wasn’t prepared
- Leaks that keep coming back after resealing
Schools such as Shiplake Church of England School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Questions to ask before booking
- Whether they’re fully insured
- How much experience the applicator has
- Which colour the sealant will be
- How the surfaces are prepared before sealing