Kent · England
Printstile Regrouting
Tiled areas in Printstile need attention? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.
- Gaps where the shower grout has gone
- Grout in corners that has cracked
- Floor grout that has worn and darkened
Regrouting in Printstile
A bathroom with good tiles can still look worn if the grout has gone. With regrouting, the tiles stay and only the grout is renewed, so nothing is ripped out. Typical jobs include grout that’s cracking and breaking up and shower grout that has worn away, on shower walls, tiled floors and wet rooms.
Somewhere as small as Printstile, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Your job is guaranteed for a year, as with all our work.
- Where
- Printstile (TN3)
- Region
- Kent
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Aftercare tips
So the new joints stay in good condition:
- Don’t use strong acidic cleaners on grout
- Check the corner silicone every few months
- Clean grout with a mild bathroom cleaner
- Don’t ignore a tile that feels loose
Clean the grout with a mild bathroom cleaner with a soft brush. Keep harsh bleach and acid limescale removers away from it because they wear grout away.
Small problems with grout are quick to put right. Left for a few years, they can become a leak, so get it looked at when you notice it.
What the job involves on each surface
Corners and edges
Corners flex as the building moves, so we seal them rather than grout them.
Bathroom floors
If floor grout keeps cracking, the floor may be moving. We look for loose tiles first.
What affects the quote in Printstile
Your quote is based on your job. We look at:
- The type of sealant required
- How many rooms, windows or areas are involved
- The amount of work
- Whether there’s mould to deal with
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll go through it with you.
Helping us quote
Photos help, but a description is a good start. Try to tell us:
- The type of property
- Pictures of the joints, sent by email
- How many joints, rooms or windows are involved
- What the problem is, such as mould, gaps, leaks or cracking
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, phone 0345 464 0079 or send us an email.
The process
We bring everything the job needs with us. Once we have agreed what’s being done, the area is protected and the work begins. Most jobs take a few hours for a shower enclosure, longer for a whole room. In a small place like Printstile, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, we check for loose or hollow tiles and point out any we find.
- We rake out the old grout to an even depth, taking care of the tile edges.
- We vacuum the joints and clean out the dust.
- We fill the joints with new grout, then clean the tiles.
- Corners and edges are resealed with flexible silicone, not grout.
Getting ready for the visit
- Tell us if parking is tricky
- Clear the area around the work
- Mention any leaks or damp you’ve noticed
Getting a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email pictures if that’s easy.
Advice
What regrouting looks like in Printstile
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to Parish Church of St Lawrence include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant. For landlords with property near Leigh (Kent) station, clean grout and fresh sealant between tenancies make a bathroom look cared for again. Managing a site like St Gregory's Catholic School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Printstile is about 3 miles north-west of Royal Tunbridge Wells, in Kent. Every kind of property in Printstile is covered for regrouting. Every job comes with our 12-month guarantee. 922 places in Kent are on our list, large and small. For nearby work, see our Crawley page, about 18 miles away.
Postcode districts we cover here for regrouting: TN3. Local streets include Penshurst Road and Barden Road. With the B2176 close by, Printstile is easy for our applicators to reach for regrouting. If you are just outside Printstile, we cover Bidborough (1 mile east), Speldhurst (1 mile south), Poundsbridge (1 mile south-west), Stockland Green (1 mile south-east) and Bullingstone (2 miles south). We also work in nearby towns such as Maidstone (15 miles north-east), Sevenoaks (8 miles north), Royal Tunbridge Wells (3 miles south-east), Tonbridge (3 miles north-east), Kings Hill (11 miles north-east) and Paddock Wood (8 miles east).
Landmarks near Printstile
The closest station to Printstile is Leigh (Kent) station, about 1.7 miles north of the centre. A little further out are Tonbridge Cottage Hospital (2.6 miles east) and The Milne Museum (3.2 miles north-east). Green spaces nearby include Barden Lake and Broadwater Warren RSPB Reserve.
Your questions about regrouting in Printstile
Is Printstile within the area you cover?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
I let a flat near Leigh (Kent) station. Can you help?
Yes, rental work is part of what we do. You can call 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we will tell you what we’re using.
How do I get a quote for regrouting in Printstile?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Is it possible to regrout only the shower area?
Yes, we often do. Shower grout tends to go before the rest, so it’s often the only area that needs doing.
Do I have to be there?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Could my grout be a different colour after regrouting?
Yes. Because the old grout is raked out, the new colour goes all the way into the joint, not just the surface.
Is it OK to seal over old sealant?
No, it won’t last. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Why deal with it now?
It’s tempting to fill a few cracks yourself, but the patches often don’t match, and the old grout keeps failing around them. Doing the full area gives you one colour and sound joints throughout. Older cottages and farmhouses around Printstile can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part.
Why Printstile clients choose us
- We leave the area clean and tidy
- An ARBOMaster approved applicator
- Over 20 years’ experience
- Experience in homes, commercial sites and hotels
Read what affects the cost or customer reviews.
Landlord and commercial work in Printstile
In hotels, rooms out of use cost money, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.