Kent · England
External & façade joints in Printstile, Kent
Sealing brickwork movement joints, render, cladding and façade joints for Printstile, backed by a one-year guarantee. Ask us for a quote.
- Sealant pulling away from one side of the joint
- Rigid filler in a joint that should flex
- Brick movement joints where the sealant has split
Common problems we fix in Printstile
If plants are growing out of a joint, the sealant has usually failed or was never there. Dirt and roots then trap moisture in the joint and speed up the damage.
The problems people generally mention when they call include:
- Failed seals between different materials
- Damp patches traced to an open external joint
- Panel joints letting water in
- Old sealant gone brittle and cracked
Rented homes near Leigh (Kent) station change hands often, and split movement joints are easy to miss on a rental until damp shows inside.
What your quote should include
- What happens if they find a problem under the old sealant
- Whether you can choose the colour
- What guarantee comes with the work
- Are they insured?
How we handle external mastic in Printstile
Many failed façade joints only get noticed once there’s a stain or a damp patch inside. We look over the joints, agree the ones to renew and reseal with a flexible, weatherproof product in a matching colour. If you have hard, crazed mastic that has stopped moving and moss and dirt in joints with no sealant left, we can help, on brickwork movement joints, joints between brick and frames and copings & trims alike.
In a village or hamlet like Printstile, older cottages and farm buildings often stand in the open, where walls and rooflines take the weather head on. Gutter joints and wall joints there need a sealant that can flex and stay put.
Big or small, you get the same one-year guarantee in Printstile and across Kent.
- Where
- Printstile (TN3)
- Wider area
- Kent
- Cover
- One year on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Why deal with it now?
Done well, a resealed joint is a neat, straight line that suits the wall. A rushed bead with no backing looks untidy and doesn’t last so it’s worth doing right. Around Printstile, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, ring 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Why Printstile customers choose us
- Over 20 years’ experience
- Domestic, commercial and hotel work
- We leave the area clean and tidy
- Rated 4.9 stars on Google
Take a look at what affects the cost and our reviews.
FAQs for Printstile
Can you do external mastic in Printstile?
Yes. Our work covers London and the South East, and Printstile is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we will send you a clear quote.
Do you cover smaller places like Printstile?
Yes, Printstile is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can landlords and businesses book you?
Yes, often. We can quote for several properties at once, and between tenancies is a good time for the work.
Can new sealant go over the old?
No, because it fails. The old sealant always comes out first, so the new sealant bonds properly.
How do I get a quote for external mastic in Printstile?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before work begins.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. We cover Printstile and the rest of Kent, along with the rest of our area.
Why do you put foam in the joint first?
That is backing rod, a closed-cell foam. It stops the sealant going in too deep and bonding to three sides, which would stop it stretching.
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
What external mastic looks like in Printstile
Historic houses like Penshurst Place (about 1.4 miles west) are a reminder that the area around Printstile has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
For an older house near a landmark such as Parish Church of St Lawrence, older walls, gutters and the joints where extensions meet them need a flexible sealant. For site and facilities teams at buildings such as St Gregory's Catholic School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Printstile is about 3 miles north-west of Royal Tunbridge Wells, in Kent. If you need external mastic in Printstile, it’s easy to get a quote: please ring 0345 464 0079 or email us. We are based in Crawley and cover Kent, Printstile included. Printstile is one of 922 towns and villages in Kent we cover. Crawley is on our list too, around 18 miles away.
Every address in TN3 is covered for external mastic, from the main roads to the quietest streets. Streets in the area include Penshurst Road and Barden Road, and we cover them all. Printstile sits on or near the B2176, so getting to you is simple. We also cover the places around Printstile: Bidborough (1 mile east), Speldhurst (1 mile south), Poundsbridge (1 mile south-west), Stockland Green (1 mile south-east) and Bullingstone (2 miles south). Further out, we also cover Maidstone (15 miles north-east), Sevenoaks (8 miles north), Royal Tunbridge Wells (3 miles south-east), Tonbridge (3 miles north-east), Kings Hill (11 miles north-east) and Paddock Wood (8 miles east).
Local landmarks in Printstile
For rail, the closest station is Leigh (Kent) station, roughly 1.7 miles north. Nearby you’ll also find Tonbridge Cottage Hospital (2.6 miles east) and The Milne Museum (3.2 miles north-east). Open spaces near Printstile include Barden Lake and Broadwater Warren RSPB Reserve.
Work for landlords, hotels and businesses
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
How we quote for external mastic
Every job gets its own quote. These are the things that affect it:
- Whether old sealant or filler has to be cut out
- How many areas need sealing
- Which sealant suits the joint
- Working hours on commercial sites
What you pay reflects the work, not a rough estimate. That is why we ask a few questions first.
What we need to know
When you call or email, it’s useful to know:
- Pictures of the joints, sent by email
- Any previous sealing or DIY work
- Where the job is, and your postcode
- The type of property
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we will talk you through the work and give you a clear price.
What sealant work cannot fix
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Cracked brickwork or render that needs a builder or plasterer
- Walls that need new movement joints cut into them
- Loose or hollow render, which needs re-rendering
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly before booking.
Surfaces we seal
- Copings & trims
- Render & cladding joints
- Concrete & block
- Brickwork movement joints
- Façade panels
- Joints between brick and frames
The process
All our tools and materials come with us in the van, so you do not need to buy or prepare anything. Once we’ve agreed what’s being done, the area is protected and the work begins. It normally takes a few hours for a handful of joints, longer for a whole elevation. For a village or hamlet like Printstile, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking each joint, agreeing the ones to redo and how we’ll reach them.
- Old sealant and any debris are cut and raked out.
- We clean both faces of the joint and prime them where the product calls for it.
- We push in closed-cell backing rod so the sealant is the right depth and bonds to the sides only.
- We gun in a flexible exterior sealant in a colour that suits the wall and tool it neatly.
Getting ready for the visit
- Clear the area around the work
- Keep children and pets away from the work area
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll take it from there.