Kent · England
Kettle Corner Regrouting
Regrouting for Kettle Corner, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Dirty, worn grout on a tiled floor
- Cracked grout along the bath or tray
- Good tiles let down by tired grout
The process
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. It usually takes anything from a few hours to a full day, depending on the area. In a small place like Kettle Corner, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We agree the area to be regrouted and point out any loose tiles.
- We remove the old grout carefully.
- The joints are cleaned out and vacuumed.
- The new grout goes in, then the tile faces are cleaned.
- We renew the silicone at the corners and edges.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Keep pets and children clear of the area while we work
- Mention any sign-in or site rules at work premises
How to get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and send you a clear quote.
Read more
About our regrouting in Kettle Corner
We check the tiles before any grout comes out. If any tiles are loose or sound hollow, we tell you, since new grout can’t fix a problem underneath. Where the tiles are sound, regrouting gives the area a new lease of life. We’re often asked to deal with floor grout that has worn and darkened and grout that makes sound tiles look old, across bathroom wall tiles, bathroom floors and tiled floors.
Being in a small place like Kettle Corner makes no difference to the job itself: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
You’re covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or drop us an email.
- Where
- Kettle Corner (ME15)
- Region
- Kent
- Guarantee
- A year, on every job
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Leave it or put it right?
Grouting over old grout rarely lasts. It sits thinly on top and soon flakes away, taking any repair with it. Removing the old grout to an even depth lets the new grout key in properly. Older cottages and farmhouses around Kettle Corner can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
What you get with us
- Every job guaranteed for a year
- We never seal over old sealant
- 20+ years of sealant experience
- Sanitary silicone with an anti-fungal additive in wet areas
Read our cost guide or our reviews.
What regrouting looks like in Kettle Corner
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Letting a property close to East Farleigh station? Then stained grout drags a rental down, and regrouting between lets puts that right. For an older house near a landmark such as Church of St Margaret, older homes can move a little, which is hard on rigid grout and tired sealant.
Kettle Corner is about 3 miles west of Maidstone, in Kent. From the centre of Kettle Corner to the outskirts, we cover regrouting for every kind of property. Kettle Corner is one of 922 towns and villages in Kent where we work for regrouting. You can also see our page for London, about 30 miles away.
All of ME15 is within our area for regrouting, from the main roads to the quietest streets. Local streets include St Helens Lane and Lower Road, and we cover them all. Other places close to Kettle Corner include Hoppers Corner (1 mile south-west), Barming Heath (1 mile north-west), Farleigh Green (1 mile south-west), East Farleigh (1 mile east) and West Farleigh (1 mile south-west). Further out, we also cover Maidstone (3 miles east), Sittingbourne (13 miles north-east), Sevenoaks (12 miles west), Royal Tunbridge Wells (12 miles south-west), Gravesend (13 miles north) and Tonbridge (9 miles south-west).
What’s near Kettle Corner
In Kettle Corner, that means homes and buildings near Quarry Wood, Oakwood Park Grammar School and The Bull Inn and the streets around them. Kettle Corner’s nearest station is East Farleigh station, about 0.7 miles east of the centre. Nearby you will also find Fremlin Walk (2.5 miles north-east) and Oakwood Hospital (1.1 miles north-east). Not far away are Boxley Hills.
What we are called out for in Kettle Corner
Movement behind the tiles cracks grout. Loose tiles, bouncy floors and timber walls can all do it, so we check the tiles before work begins.
Common reasons people contact us are:
- Discoloured grout on otherwise sound tiles
- Cracked or crumbling grout lines
- Corners filled with grout instead of silicone
- Floor grout that has worn and darkened
If you look after a building such as Barming Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before booking anyone
- Which sealant they’ll use, and why
- Which colour the sealant will be
- Who turns up on the day
- How the surfaces are prepared before sealing
For landlords and businesses
Housing providers, facilities teams and property managers book us too in Kettle Corner and across Kent. We can quote a run of properties together, and we’re fully insured.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Places near Kettle Corner
More services for Kettle Corner
Your questions about regrouting in Kettle Corner
Do you cover smaller places like Kettle Corner?
Yes. Kettle Corner is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is Kettle Corner in your area for regrouting?
Yes. Our work covers London and the South East, and Kettle Corner is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done.
Is there any odour?
That depends on the sealant. Some smell for a while, some hardly at all.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and we clear up when we are done.
Can you change the grout colour?
Yes. With the old grout removed, the new colour fills the whole joint rather than sitting on top.
When something else is needed
A few problems are outside what sealant work can do:
- A floor or wall that keeps moving
- Cracked or broken tiles
- A leaking shower valve or waste
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before booking.
Surfaces we seal
- Shower walls
- Bathroom floors
- Tiled floors
- Kitchen splashbacks
- Bathroom wall tiles
- Wet rooms
Quotes for regrouting in Kettle Corner
Jobs vary more than people expect. The main factors:
- The type of sealant required
- Whether the work is at height
- Working hours on commercial sites
- How many areas need sealing
The cost depends on the size of the job, how much old material has to come out and access to the work. You will have a clear quote before any work starts.
Asking for a quote
Photos by email are helpful but not essential. Please mention:
- If someone has resealed it before
- What’s wrong with the joints now
- How we’d reach the joints
- The rough size of the job
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand, and we’ll take it from there.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.