Kent · England
Regrouting in Hemsted
Raking out old, cracked or stained grout and regrouting tiled walls and floors in Hemsted, with a 12-month guarantee on every job. Call for a quick quote.
- Discoloured grout on otherwise sound tiles
- Old grout in a dated colour
- Cracked grout along the bath or tray
Regrouting around Hemsted
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
If you look after a building such as Stowting Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Letting a property close to Westenhanger station? Then stained grout drags a rental down, and regrouting between lets puts that right.
Hemsted is about 5 miles north of Hythe, in Kent. Wherever you are in the CT18 postcode area, we cover regrouting for homes and businesses. Hemsted is one of 922 towns and villages in Kent where we work. You can also see our page for Chelmsford, roughly 48 miles from Hemsted.
Every address in CT18 is covered for regrouting, from the main roads to the quietest streets. Neighbouring places we cover for regrouting include Woodland (1 mile south-east), Skeete (1 mile south), Stowting (1 mile west), Rhodes Minnis (1 mile north-east) and Stowting Common (1 mile north-west). Larger places within reach include Ashford (8 miles west), Canterbury (10 miles north), Dover (11 miles east), Folkestone (6 miles south-east), Whitstable (15 miles north) and Faversham (14 miles north-west).
Around Hemsted
The nearest railway station is Westenhanger station, about 2.9 miles south of the centre. Well-known places in the area include Saltwood Castle (4 miles south) and Elham Valley Countryside Centre And Railway Museum (3.7 miles south-east). Open spaces near Hemsted include Hatch Park and Tolsford Hill.
Regrouting in Hemsted, done properly
We take the old grout out to a consistent depth, without damaging the edges of the tiles. The joints are then vacuumed, regrouted and cleaned off, with silicone renewed in the corners. We’re often asked to deal with grout in a colour the owner wants to change and floor grout that has worn and darkened, across bathroom floors, kitchen splashbacks and tiled floors.
Being in a small place like Hemsted makes no difference to the job itself: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.
- Location
- Hemsted (CT18)
- Region
- Kent
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
How it works
All our tools and materials come with us in the van. After a quick look at the joints together, we protect the area and start. It normally takes a few hours for a shower enclosure, longer for a whole room. In a small place like Hemsted, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by checking the tiles for any that are loose or hollow.
- Old grout is raked out to a consistent depth without chipping the tiles.
- Dust and debris are vacuumed out of every joint.
- We fill the joints with new grout, then clean the tiles.
- The corners and edges get new silicone, because grout there would crack.
Preparing for the visit
- Keep children and pets away from the work area
- Let us know about earlier repairs to the joints
- Move anything stored near the joints
Get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. Whenever you are ready, call 0345 464 0079 or email us.
Read more
Common problems we fix in Hemsted
When tiles or the wall behind them move, the grout cracks. That can be a loose tile, a flexing floor or a stud wall, so we check the tiles before we start.
If you can see any of these, it’s time to have the joints looked at:
- Greasy, stained grout behind the hob
- A grout colour that no longer suits the room
- Grout stained black or orange that won’t clean
- Discoloured grout on otherwise sound tiles
In the older streets around Church of St Mary, walls and floors in older homes can move, and sealant and grout show it first.
Before you book anyone
- What guarantee comes with the work
- How long to leave it before use
- How much experience the applicator has
- Whether you can choose the colour
Landlords, agents and businesses in Hemsted
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Housing providers, facilities teams and property managers book us too in Hemsted and across Kent. We can quote a run of properties together, and we are fully insured for the work.
Towns and villages near Hemsted
What else we do in Hemsted
How the job changes by surface
Kitchen splashbacks
Grout behind the hob and sink works hard. We regroute and reseal the worktop joint.
Bathroom floors
If floor grout keeps cracking, the floor may be moving. We check the tiles before regrouting.
Common questions in Hemsted
Is Hemsted in your area for regrouting?
Yes, Hemsted is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or send us an email and let us know what needs doing.
Can you help a landlord with a rental near Westenhanger station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Can new sealant go over the old?
No, and we never do. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.
Is the work guaranteed?
Every job comes with our 12-month guarantee.
What do you need from me for a quote?
The location, the problem and the rough size of the job. Photos by email help too.
Is there any odour?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Why deal with it now?
Cleaning products may brighten grout for a time, but mould that has got into grout generally comes back. New grout, with silicone in the corners, deals with the cause. Where a wall is exposed, as many are in small places like Hemsted, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What you get with us
- Full insurance on every job
- Old sealant always removed completely
- Rated 4.9 stars on Google
- Tidy, careful work
Read what affects the cost or what customers say.
Looking after it afterwards
To keep the joints looking good and working properly:
- Wipe water off the walls when you are done
- Run the extractor fan during and after a shower
- Look at the sealant in the corners now and then
- Keep harsh bleach and acid cleaners off the grout
Wipe the tiles down after a shower stops soap and water sitting on the grout. Ventilate the room well so the grout dries between uses.
Leaving failed grout can mean tiles come loose. Once that happens, regrouting won’t fix it so early action pays.
Can I do it myself?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.