Kent · England
Regrouting in Halfway Street, Kent
Regrouting for Halfway Street, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Crumbling grout between the tiles
- Dirty, worn grout on a tiled floor
- Kitchen splashback grout stained by grease
Bathrooms and kitchens in Halfway Street
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Homes close to Church of St Andrew include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Halfway Street is about 4 miles north-west of Dover, in Kent. Anywhere in CT15, we cover regrouting for homes and businesses. We cover 922 towns and villages across Kent, from the larger towns to small villages. You can also see our page for Chelmsford, about 50 miles away.
Here we cover the CT15 postcode area for regrouting. If you are just outside Halfway Street, we cover Sibertswold (1 mile north-east), Coldred (1 mile east), Lydden (1 mile south-east), Waldershare (2 miles east) and Eythorne (2 miles north-east). Within a short drive, we also cover Canterbury (9 miles north-west), Margate (15 miles north-east), Dover (4 miles south-east), Folkestone (7 miles south), Ramsgate (14 miles north-east) and Broadstairs (15 miles north-east).
What’s near Halfway Street
Typical jobs here are in homes near The Bricklayers' Arms, among other places. For rail, the closest station is Shepherds Well station, about 0.6 miles north-east. Other landmarks nearby include Buckland Hospital (4.5 miles south-east) and Dover Transport Museum (3.6 miles south-east).
About our regrouting in Halfway Street
Most regrouting jobs include resealing too. Grout is for the joints between tiles, but internal corners and edges flex, so they’re sealed with silicone rather than grout. Renewing both together means nothing is left half-done. We work on bathroom wall tiles, shower walls and kitchen splashbacks, and people most often call us about grout stained black or orange that won’t clean and cracked or crumbling grout lines.
Around Halfway Street, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Big or small, you get the same one-year guarantee.
- Where
- Halfway Street (CT15)
- Region
- Kent
- Cover
- One year on every job
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What we cannot put right
It helps to know what we can’t do:
- A floor or wall that keeps moving
- Loose tiles, which need refixing first
- A leaking wet room membrane
Not sure which it is? You can call 0345 464 0079 or email us and we’ll tell you honestly before you book.
Where we work in Halfway Street
- Shower walls
- Kitchen splashbacks
- Bathroom wall tiles
- Tiled floors
- Bathroom floors
- Wet rooms
Looking after it afterwards
Aftercare is simple:
- Get any tile that moves checked promptly
- Use a squeegee on the tiles after showering
- Keep the fan on after showering
- Do not use strong acidic cleaners on grout
Give the new grout the time we tell you before using the shower, so it cures fully. From then on, a quick rinse after showering helps and let the room air.
Once grout cracks, it tends to get worse. Water gets behind the tiles, and they can begin to come away, so regrouting early can save a retile.
How we quote for regrouting
Call for a quick quote. What matters most is:
- Whether there’s mould to deal with
- Whether the work is at height
- The number of rooms or windows
- The amount of work
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
What to tell us for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- A few photos by email, if you can
- How we’d reach the joints
- Whether it has been sealed before
- Where the property is
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Also near Halfway Street
Other services in Halfway Street
Do you need regrouting in Halfway Street?
A bathroom that stays damp keeps the grout wet, and damp grout is where mould grows. Black marks that come back after cleaning are often in the grout itself.
Any of these means the joints need attention:
- Kitchen splashback grout stained by grease
- Good tiles let down by tired grout
- Floor grout that has worn and darkened
- Shower grout that has worn away
If you let a flat or house near Shepherds Well station, stained grout drags a rental down, and regrouting between lets puts that right.
What to look for in a quote
- Are they insured?
- How the colour is chosen
- Whether all the old sealant comes out first
- Which sealant they’ll use, and why
FAQs for Halfway Street
Is Halfway Street in your area for regrouting?
Yes. Our work covers London and the South East, and Halfway Street is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Is Halfway Street within the area you cover?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you work for letting agents?
Yes, often. Several properties can be quoted together, and between tenancies is a good time for the work.
Can you quote for more than one area?
Yes. Just list everything you need and you’ll get one quote.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
What information do you need?
Let us know what needs doing and where. We’ll ask anything else we need to know.
Which products do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Are you fully insured?
Yes, we are fully insured.
What happens if it’s left?
New grout smeared over the old doesn’t bond well. It sits thinly on top and soon flakes away, taking any repair with it. Removing the old grout to an even depth lets the new grout key in properly. Where a wall is exposed, as many are in small places like Halfway Street, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
What you get with us
- Sanitary silicone with an anti-fungal additive in wet areas
- Full insurance on every job
- An ARBOMaster approved applicator
- More than 20 years in sealant work
See our cost guide or what customers say.
How the visit works
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from a few hours to a full day, depending on the area. Somewhere as small as Halfway Street, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by checking the tiles for any that are loose or hollow.
- We rake out the old grout to an even depth, taking care of the tile edges.
- Dust and debris are vacuumed out of every joint.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- Corners and edges are resealed with flexible silicone, not grout.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any water getting in
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved and give you a clear quote.
Advice
Surface by surface
Shower walls
Shower walls get wet every day, so its grout takes the most punishment. It’s often the first place grout washes out.
Kitchen splashbacks
A splashback can be regrouted without touching the worktop. The worktop edge is finished with silicone.