Kent · England

Regrouting in Coldred, Kent

Regrouting across Coldred and nearby, with every bit of old sealant taken out first and a one-year guarantee.

  • Dirty, worn grout on a tiled floor
  • Discoloured grout on otherwise sound tiles
  • Crumbling grout between the tiles

Regrouting near Coldred

Regrouting in Coldred

Before we start, the tiles are checked. Loose or hollow tiles are pointed out first, since new grout can’t fix a problem underneath. Where the tiles are sound, regrouting gives the area a new lease of life. We are often asked to deal with grout that’s cracking and breaking up and grout washed out of a shower, on tiled floors, bathroom wall tiles and shower walls.

Somewhere as small as Coldred, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.

There’s a 12-month guarantee on every job, large or small.

Location
Coldred (CT15)
Wider area
Kent
Guarantee
12 months on all our work
Quote
A clear price before work begins
Call
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall

Why deal with it now?

Colouring the surface of old grout is a quick cosmetic fix. They won’t fill gaps or keep water out, and stains can show through again. Raking out and regrouting replaces the grout itself. Older cottages and farmhouses around Coldred can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.

Why us?

  • Quality sealants from Arbo and Everbuild
  • Fully insured
  • Homes, businesses and hotels
  • Anti-fungal silicone where joints get wet

Read our cost guide and customer reviews.

How the visit works

Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it generally takes a few hours for a shower enclosure, longer for a whole room. Somewhere as small as Coldred, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. Every tile area is checked for hollow or loose tiles first.
  2. We rake out the grout evenly, protecting the tile edges.
  3. We vacuum the joints so the new grout bonds.
  4. We regrout the joints and clean the tile faces.
  5. We finish with silicone in the moving joints.

Before we arrive

  • Tell us about any water getting in
  • Mention any tricky access
  • Tell us about any previous sealing or DIY attempts

Get a quote

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that’s easy.

Ask for a quote

Related advice

What affects the cost of regrouting

The price is agreed before any work begins. It takes into account:

  • The number and length of the joints
  • How many areas need sealing
  • When we can work, for business premises
  • The old material and how stubborn it is

We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we will talk you through it.

What we need to know

When you call or email, these details help:

  • Where the job is, and your postcode
  • Any access issues, like height or stairs
  • Whether it has been sealed before
  • Whether it’s a home or a business

For regrouting in Coldred, call 0345 464 0079 or send us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.

Your questions about regrouting in Coldred

Can you do regrouting in Coldred?

Yes, Coldred is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or email us with a few details of the job, and we will send you a clear quote.

Can you help a landlord with a rental near Shepherds Well station?

Yes, rental work is part of what we do. You can call 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before we start.

How much does regrouting cost in Coldred?

Every job is different, so each one gets its own quote. For a quick quote, phone 0345 464 0079 or email us with a short description of the job.

Will there be a smell?

Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.

What information do you need?

Only a few details: the address or postcode, what’s wrong and any access issues. Then ring 0345 464 0079 or drop us an email.

Does someone need to be in?

It depends on the job. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.

Will you leave a mess?

No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.

Can you do several jobs on one visit?

Yes, and it often makes sense. Doing several areas at once is generally more efficient, so mention them when you ask for a quote.

What we’re called out for in Coldred

Strong cleaning products and hard scrubbing slowly erode grout. Some bleaches and acid descalers break grout down with repeated use, until the joints are rough and low.

The most common problems we see are:

  • Grout that’s cracking and breaking up
  • Floor grout that has worn and darkened
  • Grout that stays dark however much it’s cleaned
  • Grout that makes sound tiles look old

Letting a property close to Shepherds Well station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again.

What your quote should include

  • Whether the sealant suits the joint
  • Are they insured?
  • Which colour the sealant will be
  • What preparation is included

10 questions to ask before booking

Work for landlords, hotels and businesses

Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.

Mouldy or split sealant often shows up at the end of a tenancy. Several properties can be quoted together.

What regrouting looks like in Coldred

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

For site and facilities teams at buildings such as Lydden Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. For an older house near a landmark such as Church of St Pancras, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

Coldred is about 4 miles north-west of Dover, in Kent. Across the CT15 area, we can carry out regrouting at your property. Coldred is one of 922 towns and villages in Kent we cover for regrouting. For nearby work, see our Chelmsford page.

We cover every part of the CT15 postcode area for regrouting. If you’re just outside Coldred, we cover Sibertswold (1 mile north-west), Lydden (1 mile south), Waldershare (1 mile north-east), Halfway Street (1 mile west) and Eythorne (2 miles north-east). Further out, we also cover Canterbury (10 miles north-west), Margate (15 miles north-east), Dover (4 miles south-east), Folkestone (7 miles south-west), Ramsgate (13 miles north-east) and Broadstairs (15 miles north-east).

Around Coldred

Typical jobs here are in homes near The Bell Inn, among other places. The nearest railway station is Shepherds Well station, roughly 1.1 miles north-west of the centre. A little further out are Dover Castle (4.8 miles south-east) and Dover Transport Museum (2.6 miles south-east). Green spaces nearby include Dover Western Heights.

Map of Coldred © OpenStreetMap contributors

What the job involves on each surface

Kitchen splashbacks

Grout behind the hob and sink works hard. We renew the grout and the worktop sealant.

Bathroom wall tiles

Grout by the basin and bath tends to mark first. We can regroute just those areas or the whole wall.

DIY versus a professional finish

A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.

Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job