West Sussex · England
Furnace Wood Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homes and businesses in Furnace Wood and across West Sussex. Fully insured, ARBOMaster approved and guaranteed for a year.
- Floor grout that will not come clean
- Old grout in a dated colour
- Discoloured grout on otherwise sound tiles
Regrouting in Furnace Wood, done properly
When grout stays dark however much you clean it, the discolouration has normally soaked into the grout. Replacing it is the lasting answer and you can pick a different colour while you’re at it. Common call-outs are for floor grout that has worn and darkened and good tiles let down by tired grout, on shower walls, bathroom wall tiles and kitchen splashbacks.
Somewhere as small as Furnace Wood, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
A 12-month guarantee comes as standard, so you are covered after we’ve gone.
- Location
- Furnace Wood (RH19)
- Region
- West Sussex
- Cover
- One year on every job
- Quote
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Signs you need regrouting in Furnace Wood
Most grout is porous, so water, soap and grime soak into it. Given time, it discolours and begins to break down and showers that get daily use suffer most.
The most common problems we see are:
- Floor grout that has worn and darkened
- Stained grout that cleaning will not shift
- Crumbling grout between the tiles
- Old grout in a dated colour
Rented homes near East Grinstead station change hands often, and a regrout while the flat is empty is quicker than working around a tenant.
What to look for in a quote
- Whether all the old sealant comes out first
- Whether the sealant suits the joint
- What insurance they hold
- What happens if they find a problem under the old sealant
What we cannot put right
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- Cracked or broken tiles
- Tiles that are loose or hollow behind
- Water coming from plumbing rather than grout
Not sure which it is? You can call 0345 464 0079 or email us and we’ll tell you honestly.
Joints and surfaces we work on
- Bathroom wall tiles
- Shower walls
- Kitchen splashbacks
- Tiled floors
- Bathroom floors
- Wet rooms
What regrouting looks like in Furnace Wood
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
If you look after a building such as Felbridge Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Furnace Wood is about 3 miles west of East Grinstead, in West Sussex. From the centre of Furnace Wood to the outskirts, regrouting is available for homes and businesses alike, from flats and houses to offices and hotels. 371 places in West Sussex are on our list, from the larger towns to small villages. For nearby work, see our Crawley page.
Here we cover the RH19 postcode area for regrouting. Whether your property is on Lake View Road, Felcot Road and Furnace Farm Road or a nearby road, we can help. Nearby, we also carry out regrouting in Domewood (1 mile north-west), Snow Hill (1 mile west), Felbridge (1 mile east), Crawley Down (1 mile south) and Newchapel (2 miles north-east). Within a short drive, we also cover Crawley (6 miles west), Horsham (12 miles south-west), Haywards Heath (10 miles south), Burgess Hill (13 miles south), East Grinstead (3 miles east) and Broadfield (7 miles south-west).
Landmarks near Furnace Wood
Locally, jobs take us to homes and businesses close to Imberhorne School. The closest station to Furnace Wood is East Grinstead station, about 2.5 miles south-east of the centre. Well-known places in the area include Effingham Park Motor Museum (0.9 miles west) and Queen Victoria Hospital (3.1 miles east). The countryside around Furnace Wood includes Hedgecourt Lake.
Your questions about regrouting in Furnace Wood
Can you do regrouting in Furnace Wood?
Yes, Furnace Wood is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or send us an email and tell us what needs doing.
Do you cover smaller places like Furnace Wood?
Yes, Furnace Wood is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can landlords and businesses book you?
Yes. As well as householders, we work for landlords, agents, businesses and hotels across West Sussex.
Which products do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.
Can you regrout if a few tiles are loose?
Tiles that have come away need sorting first. We will point them out before any grout comes out.
How long should I wait before showering?
It varies with the products and the room. We’ll tell you exactly how long at the end of the visit.
What information do you need?
A short description and the location, plus pictures if you have them. If we need more, we will ask.
Are you an approved applicator?
Yes. We hold ARBOMaster approved applicator status and we’re fully insured too.
Looking after it afterwards
After the cure time, these simple habits help:
- Check the corner silicone every few months
- Do not ignore a tile that feels loose
- Rinse soap off the tiles after each shower
- Do not use strong acidic cleaners on grout
Use a gentle cleaner on the grout with a soft brush. Keep harsh bleach and acid limescale removers away from it, as they can break grout down.
Tiles can come away if failed grout is left. Once that happens, regrouting will not fix it so early action pays.
Why deal with it now?
Grouting over old grout rarely lasts. It sits thinly on top and soon flakes away. Raking out to a consistent depth gives the new grout something to hold. In a small place like Furnace Wood, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first and give you a clear quote before any work starts.
Why Furnace Wood clients choose us
- We are fully insured
- Neat joints and a tidy finish
- 20+ years of sealant experience
- Domestic, commercial and hotel work
Take a look at our cost guide and what customers say.
For landlords and businesses
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
How the visit works
You do not need to clear the whole room or building, just the space around the work. Everything nearby is protected, and the job takes a few hours, or longer for a fully tiled room for a typical job. Somewhere like Furnace Wood needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we agree what’s being done and flag any loose tiles.
- Grout is raked out without chipping the tiles.
- The joints are cleaned out and vacuumed.
- The new grout goes in, then the tile faces are cleaned.
- We renew the silicone at the corners and edges.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- Tell us about any previous sealing or DIY attempts
- Tell us if parking is tricky
Ask for a quote
There’s no standard price list, because every job is different. Instead, we send you a clear quote for your job. To get started, ring 0345 464 0079 or email us.