Essex · England

Fox Street Regrouting

Problem with your tiled areas in Fox Street? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.

  • Corners filled with grout instead of silicone
  • Floor grout that won’t come clean
  • Grout washed out of a shower

Regrouting for Fox Street homes and businesses

What affects the quote in Fox Street

We quote each job individually. This is what makes a difference:

  • Access and height
  • Mould in or behind the old joints
  • The number and length of the joints
  • The product the joint needs

Leaving a failed joint normally makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, ring 0345 464 0079 or send us an email for an honest opinion and a quote.

What to tell us for a quote

When you contact us, these details help:

  • Whether it has been sealed before
  • Where the job is, and your postcode
  • Access, such as stairs, a lift or height
  • The rough size of the job

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you are ready, call 0345 464 0079 or email us.

Regrouting in Fox Street

Our applicators rake out the old grout to an even depth, taking care not to chip the tile edges. The joints are then vacuumed, regrouted and cleaned off, and the corners get fresh silicone. Typical jobs include floor grout that has worn and darkened and cracked or crumbling grout lines, on shower walls, bathroom wall tiles and wet rooms.

For a small place like Fox Street, regrouting is planned like any other job: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.

A 12-month guarantee comes as standard.

Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom
Location
Fox Street (CO7)
Wider area
Essex
Guarantee
12 months on all our work
Quote
A clear quote up front
Call
0345 464 0079
Updated
26 October 2026

How to look after the new joints

Aftercare is simple, and it makes a real difference:

  • Wipe water off the walls when you are done
  • Use gentle cleaners on grout
  • Rinse the tiles after showering
  • Look at the sealant in the corners now and then

A squeegee or cloth over the tiles after use keeps water off the grout. Ventilate the room well so the grout dries between uses.

Leaving failed grout can mean tiles come loose. By then, new grout alone is not enough so early action pays.

When something else is needed

Before you book, it’s worth knowing the limits:

  • Failed tanking or waterproofing under the tiles
  • Tiles that are chipped or split
  • Leaks from pipes, valves or wastes (a plumber’s job)

Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly.

Joints and surfaces we work on

  • Bathroom floors
  • Kitchen splashbacks
  • Shower walls
  • Wet rooms
  • Tiled floors
  • Bathroom wall tiles

Why it’s worth doing now in Fox Street

New grout smeared over the old does not bond well. A thin skin on top tends to break off. Raking out to a consistent depth gives the new grout something to hold. Around Fox Street, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.

What you get with us

  • Approved under the ARBOMaster scheme
  • Anti-fungal sanitary silicone in wet areas
  • Old sealant always removed completely
  • Over 20 years’ experience

See how sealant jobs are priced and what customers say.

FAQs for Fox Street

Do you work for landlords with property near Hythe station?

Yes, rental work is part of what we do. Just phone 0345 464 0079 or email us and tell us about the property, and we will give you a clear price.

Will you come out to Fox Street?

Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

What does regrouting cost?

There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before work begins.

Do I have to be there?

For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you do not need to watch us work.

Are you fully insured?

Yes. We’re fully insured, and we’ve been doing sealant work for more than 20 years.

Can you seal over the old sealant?

No, because it fails. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.

Will there be a smell?

That depends on the sealant. Some products have a noticeable smell, others very little.

Do you do commercial work?

Yes. Larger jobs can be planned room by room or area by area to suit the site.

How it works

When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes anything from a few hours to a full day, depending on the area. Somewhere like Fox Street needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. We check the tiles are sound and flag any that are loose or hollow.
  2. Old grout is raked out to a consistent depth without chipping the tiles.
  3. The joints are vacuumed and cleaned.
  4. We fill the joints with new grout, then clean the tiles.
  5. Corners and edges are resealed with flexible silicone, not grout.

How to prepare

  • Let us know about stairs, lifts or work at height
  • On commercial sites, let us know about site rules
  • Let us know if you’ve seen damp or leaks

How to get a quote

There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or drop us an email.

Ask for a quote

Related advice

Fox Street homes and their sealant

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

For site and facilities teams at buildings such as Roach Vale Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. Letting a property close to Hythe station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again. In the older streets around Church of St John, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

Fox Street is about 3 miles north-east of Colchester, in Essex. Our applicators cover regrouting for homes and businesses in Fox Street, as part of our work across Essex. Across Essex, we cover 644 places, Fox Street among them. Chelmsford is on our list too, about 23 miles from Fox Street.

We work across CO7 for regrouting. If you need regrouting at a property on Colchester Road, Crown Lane South and Fox Wood Chase or anywhere close by, we can help. Close by, we work in Ardleigh (2 miles north-east), Ardleigh Heath (2 miles north-east), Langham (3 miles north), Lamb Corner (3 miles north-east) and Hornestreet (3 miles north). We also work in nearby towns such as Colchester (3 miles south-west), Clacton-on-Sea (11 miles south-east), Harwich (13 miles east), Camulodunum (4 miles south-west), Halstead (14 miles west) and Tiptree (11 miles south-west).

Landmarks near Fox Street

In Fox Street, that means homes and buildings near Gilberd School and Welsh Wood and the streets around them. For rail, the closest station is Hythe station, about 2.1 miles south-west. Other landmarks nearby include Lion Walk (2.7 miles south-west) and Colchester Castle (2.5 miles south-west). Green spaces nearby include Westhouse Wood.

Map of Fox Street © OpenStreetMap contributors

Can I do it myself?

The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.

Landlords, agents and businesses in Fox Street

Landlords and agents in Fox Street can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.

A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job