Kent · England
Regrouting in Drellingore
Specialist regrouting for Drellingore: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Floor grout that will not come clean
- Corners filled with grout instead of silicone
- Stained grout that cleaning won’t shift
Quotes for regrouting in Drellingore
Call for a quick quote. The main things that affect it are:
- The product the joint needs
- Working hours on commercial sites
- Access and height
- How many areas need sealing
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- Roughly how big the job is
- Whether it has been sealed before
- Whether it’s a home or a business
- Where the job is, and your postcode
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we will come back to you with a quote.
Regrouting for homes and businesses in Drellingore
Before work begins, the tiles are checked. If any tiles are loose or sound hollow, we tell you, because regrouting will not fix what’s behind them. With sound tiles, regrouting is a tidy, lasting improvement. Common call-outs are for grout that stays dark however much it’s cleaned and good tiles let down by tired grout, across bathroom wall tiles, kitchen splashbacks and wet rooms.
For a small place like Drellingore, regrouting is planned like any other job: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Location
- Drellingore (CT18, CT15)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Use a soft brush rather than a wire one
- Give the walls a quick rinse after use
- Use gentle cleaners on grout
- Do not use strong acidic cleaners on grout
Keep an eye on the silicone in the corners. It’s the part that moves, so the sealant there will need renewing in time, long before the grout does.
Grout that is washing out of a shower shouldn’t be left. Each shower drives water into the open joints and it can end up in the wall or the ceiling below.
What we can’t put right
In fairness, some problems need a different trade:
- A leaking shower valve or waste
- Movement in a stud wall or floor
- Damaged tiles that need replacing
Not sure which it is? You can ring 0345 464 0079 or send us an email and we will tell you honestly before booking.
Surfaces we seal
- Wet rooms
- Bathroom wall tiles
- Shower walls
- Bathroom floors
- Kitchen splashbacks
- Tiled floors
Places near Drellingore
More services for Drellingore
Drellingore homes and their sealant
Drellingore is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Letting a property close to Folkestone Central station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again. If you live in an older home near Church of St Michael, walls and floors in older homes can move, and sealant and grout show it first.
Drellingore is about 2 miles east of Hawkinge, in Kent. If you need regrouting in Drellingore, it’s easy to get a quote: please ring 0345 464 0079 or email us. We are based in Crawley and cover Kent. Drellingore is one of 922 places in Kent we cover. Our Chelmsford page covers work nearby, about 52 miles away.
We work across CT18 and CT15 for regrouting. If you are just outside Drellingore, we cover South Alkham (1 mile north-east), Alkham (1 mile north-east), Satmar (1 mile south-east), Chalksole Green (1 mile north-east) and Capel-le-Ferne (2 miles south). Larger places within reach include Ashford (15 miles west), Canterbury (12 miles north-west), Dover (4 miles east), Folkestone (3 miles south-west), Deal (11 miles north-east) and Hythe (6 miles south-west).
Around Drellingore
We work in homes and buildings around Sladden Wood, among other places. For rail, the closest station is Folkestone Central station, roughly 3.1 miles south-west. Well-known places in the area include Royal Victoria Hospital (2.9 miles south-west) and Folkestone Museum (3.1 miles south). Open spaces near Drellingore include Sugar Loaf Hill and Dover Western Heights.
For landlords and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
If you manage several properties in or around Drellingore, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.
Why act early in Drellingore
Grouting over old grout rarely lasts. A thin skin on top tends to break off. Raking out to a consistent depth gives the new grout something to hold. Older cottages and farmhouses around Drellingore can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why us?
- Experience in homes, commercial sites and hotels
- Tidy, careful work
- Fully insured
- Over 20 years’ experience
How the visit works
Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and clear up. It usually takes anything from a few hours to a full day, depending on the area. For a village or hamlet like Drellingore, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- Every tile area is checked for hollow or loose tiles first.
- We rake out the grout evenly, protecting the tile edges.
- We vacuum the joints so the new grout bonds.
- We regrout the joints and clean the tile faces.
- We finish with silicone in the moving joints.
Getting ready for the visit
- Tell us about any water getting in
- Tell us if parking is tricky
- Let us know about stairs, lifts or work at height
Getting a quote
To get a quote, ring 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
Advice
Drellingore: your questions answered
Can you do regrouting in Drellingore?
Yes, Drellingore is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or drop us an email and let us know what needs doing.
Do you cover smaller places like Drellingore?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status.
Will it make a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Do you remove the old sealant?
Yes, always, and completely. New sealant won’t bond properly to old, so the joint is cleaned back first.
Can you quote for more than one area?
Yes. Just list everything you need and you’ll get one quote.
Where are you based?
We’re a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
Are you fully insured?
Yes. Mr Mastic is fully insured, and we have been doing sealant work for more than 20 years.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.