Buckinghamshire · England
Regrouting in Coombe, Buckinghamshire
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homes and businesses in Coombe and across Buckinghamshire. Fully insured, ARBOMaster approved and guaranteed for a year.
- Good tiles let down by tired grout
- Grout in a colour the owner wants to change
- Grout washed out of a shower
What sealant work can’t fix
We’ll always be straight with you, so here’s what new sealant will not do:
- A leaking shower valve or waste
- A structure that flexes behind the tiles
- Tiles that are loose or hollow behind
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think.
Surfaces we seal
- Kitchen splashbacks
- Bathroom floors
- Bathroom wall tiles
- Shower walls
- Wet rooms
- Tiled floors
Regrouting for homes and businesses in Coombe
Grout is the filler between your tiles, while sealant goes where tiles meet a bath, tray or worktop. When grout cracks or washes out, water has a way in behind the tiling. We rake it out and replace it and renew the silicone at the edges. If you’re dealing with a grout colour that no longer suits the room and discoloured grout on otherwise sound tiles, we can put it right, on tiled floors, bathroom floors and kitchen splashbacks alike.
Around Coombe, it’s houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Big or small, you get the same 12-month guarantee in Coombe and across Buckinghamshire.
- Where
- Coombe (HP17)
- Wider area
- Buckinghamshire
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Coombe
More services for Coombe
Work for landlords, hotels and businesses
Letting agents and landlords in Coombe can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for.
If you manage several properties in or around Coombe, several properties can be quoted together. Send us the addresses and the work at each.
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Regrouting in Coombe: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Managing a site like Great Kimble Church of England School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. For landlords with property near Little Kimble station, a regrout while the flat is empty is quicker than working around a tenant. If you live in an older home near Church of St Peter and St Paul, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Coombe is about 5 miles south of Aylesbury, in Buckinghamshire. Every kind of property in Coombe is covered for regrouting, old or new, large or small. Every job comes with our 12-month guarantee. Our Buckinghamshire coverage runs to 263 places, Coombe among them. There’s also a page for Oxford, about 19 miles away.
We work across the HP17 postcode area for regrouting. Other places close to Coombe include Butler's Cross (1 mile north), Ellesborough (1 mile north-west), Chalkshire (1 mile north), Terrick (1 mile north) and Nash Lee (1 mile north). Further out, we also cover Aylesbury (5 miles north), High Wycombe (8 miles south), Chesham (8 miles east), Marlow (12 miles south), Amersham (9 miles south-east) and Beaconsfield (11 miles south-east).
Around Coombe
Locally, jobs take us to homes and businesses close to John Colet School and The Russell Arms, among other places. The closest station to Coombe is Little Kimble station, roughly 1.3 miles west. Other landmarks nearby include Little Kimble Motte (1 mile west) and Trenchard Museum (3.1 miles north-east). For a walk, there’s Brush Hill Local Nature Reserve and Coombe Hill.
Your questions about regrouting in Coombe
Can you do regrouting in Coombe?
Yes. We work across London and the South East, and Coombe is part of that. You can ring 0345 464 0079 or drop us an email and tell us what needs doing, and we will give you a clear price.
Can you help a landlord with a rental near Little Kimble station?
Yes. We work for landlords and agents as well as homeowners, and several properties can be quoted together. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear price.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
What do you put in the joint?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Are you insured?
Yes, we’re fully insured.
Are you an approved applicator?
Yes. We’re an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Can you change the grout colour?
Yes. Because the old grout is raked out, the new colour goes all the way into the joint rather than sitting on top.
What guarantee comes with the work?
All our work carries a one-year guarantee, and we’re fully insured.
Surface by surface
Kitchen splashbacks
Grout behind the hob and sink works hard. We renew the grout and the worktop sealant.
Bathroom wall tiles
We can regroute all the walls in a bathroom, depending on size. You can change the colour at the same time.
Why it’s worth doing now in Coombe
Bleach can lighten stained grout for a while, but mould that has got into grout usually comes back. New grout, with silicone in the corners, deals with the cause. Around Coombe, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What you pay reflects the work, not guesswork. That is why we ask about the job first and give you a clear quote before any work starts.
Why book with us
- Arbo and Everbuild products
- Sanitary silicone with an anti-fungal additive in wet areas
- More than 20 years in sealant work
- 180+ five-star Google reviews
See our cost guide or what customers say.
Keeping the joints in good condition
After the cure time, these simple habits help:
- Have loose tiles looked at early
- Check the corner silicone every few months
- Use gentle cleaners on grout
- Skip wire brushes and scourers
Leave the area unused for as long as we advise, so it cures fully. After that, rinse the tiles after showering and let the room air.
If grout in the shower is washing out, act soon. Each shower drives water into the open joints, and that water can reach the wall or the floor below.
What happens on the day
The work is kept neat and contained to the joints we are treating, so you can carry on as normal. The job normally takes anything from a few hours to a full day, depending on the area, and we tell you how long to leave it before we go. Somewhere as small as Coombe, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- The joints are vacuumed clean.
- New grout is pressed into the joints and the tiles are cleaned.
- We finish with silicone in the moving joints.
How to prepare
- Let us know about stairs, lifts or work at height
- Keep pets and children clear of the area while we work
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. Whenever you are ready, phone 0345 464 0079 or email us.