Windsor and Maidenhead · England
Clewer Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors in Clewer, with a one-year guarantee on every job. Ask us for a quote.
- Grout in corners that has cracked
- Cracked or crumbling grout lines
- Kitchen splashback grout stained by grease
Common problems we fix in Clewer
Some grout fails because it was mixed or laid badly. Grout that was too wet, not packed in or cleaned off too hard tends to wash out early.
Any of these means the joints need attention:
- A grout colour that no longer suits the room
- Cracked or crumbling grout lines
- Grout that makes sound tiles look old
- Gaps where the shower grout has gone
If you let a flat or house near Windsor & Eton Central station, a regrout while the flat is empty is quicker than working around a tenant.
What your quote should include
- What preparation is included
- Is the old sealant removed completely?
- Whether you can choose the colour
- What insurance they hold
Regrouting in Clewer
Our applicators rake out the old grout to an even depth, taking care not to chip the tile edges. The joints are then vacuumed, regrouted and cleaned off, with silicone renewed in the corners. We work on shower walls, wet rooms and kitchen splashbacks, and people most often call us about cracked grout along the bath or tray and grout stained black or orange that won’t clean.
In and around Clewer, older properties sit alongside newer ones. Older homes can move a little with the seasons, which is hard on tired sealant and rigid grout.
There’s a 12-month guarantee on every job, large or small.
- Where
- Clewer (SL4)
- Wider area
- Windsor and Maidenhead
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Regrouting around Clewer
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in. There are hotels and other places to stay in and around Clewer. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
For an older house near a landmark such as Church of St Andrew, walls and floors in older homes can move, and sealant and grout show it first. If you look after a building such as St Edward's Catholic First School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Clewer is about 1 mile north of Windsor, in Windsor and Maidenhead. Every kind of property in Clewer is covered for regrouting. The work is guaranteed for a year. 57 places in Windsor and Maidenhead are on our list. You can also see our page for Reading, about 15 miles away.
We work across SL4 for regrouting and the streets around it. Local streets include Oak Lane, Vale Road and Mill Lane, all of which we cover. Clewer is on the A308 and A332, so it’s easy for us to get to with everything needed for regrouting. If you are just outside Clewer, we cover Windsor (1 mile south), Eton (1 mile north-east), Eton Wick (1 mile north-west), Boveney (1 mile west) and Dedworth (1 mile south-west). Within a short drive, we also cover Maidenhead (5 miles north-west), Boyn Hill (5 miles west), North Ascot (5 miles south-west), Cookham (7 miles north-west), Furze Platt (6 miles north-west) and Broomhall (6 miles south).
Around Clewer
In Clewer, that means homes and buildings near The Windsor Boys' School, The Windsor Boys' School and The Vansittart Arms, among other places. The closest station to Clewer is Windsor & Eton Central station, about 0.7 miles east of the centre. Well-known places in the area include Museum of Antiquities (0.7 miles north-east) and King Edward VII Hospital (1 mile south-east). For a walk, there’s Taplow Lake and Bray Pit.
When it isn’t the sealant
Before booking, it’s worth knowing the limits too:
- A floor or wall that keeps moving
- Waterproofing that has failed below the tiling
- Water coming from plumbing rather than grout
Not sure which it is? You can ring 0345 464 0079 or send us an email and we will tell you honestly before you book.
Surfaces we seal
- Wet rooms
- Shower walls
- Tiled floors
- Bathroom floors
- Bathroom wall tiles
- Kitchen splashbacks
What else we do in Clewer
Common questions in Clewer
Do you work in hotels near Clewer?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Will you come out to Clewer?
Yes. Clewer is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can tenants book the work?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
Is it possible to regrout only the shower area?
Yes, we often do. Shower grout tends to go before the rest, so many people regrout just that part.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Which products do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Is regrouting a chance to pick a new grout colour?
Yes, regrouting is the time to do it. Mention the colour you have in mind when you ring 0345 464 0079 or email us.
Surface by surface
Shower walls
The grout in a shower takes the brunt of the water. We rake it out and regrout, and reseal the corners.
Wet rooms
In a wet room, the whole floor gets wet, so sound grout really matters. We check the tiles first.
The process
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a few hours for a shower enclosure, longer for a whole room. For a job in Clewer, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- First, we check for loose or hollow tiles and point out any we find.
- Old grout is raked out to a consistent depth without chipping the tiles.
- The joints are vacuumed and cleaned.
- New grout is worked into the joints and cleaned off the tile faces.
- The corners and edges get new silicone, because grout there would crack.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Mention any sign-in or site rules at work premises
- Clear items away from the joints we’re working on
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.
Advice
Should I try it myself first?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
What happens if it’s left?
Cracked grout lets water behind the tiles. Leave it, and the adhesive or the wall behind can suffer, which turns a regrout into a retile. Sorting it early keeps the job simple. Around Clewer, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
The cost depends on how much there is to do, how much old material has to come out and access to the work. We give a clear quote before we start.
Why Clewer customers choose us
- 4.9 on Google from 180+ five-star reviews
- We never seal over old sealant
- Fully insured
- 12-month guarantee on every job
Read our cost guide and our reviews.
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. We suggest:
- Clean with a soft brush, not anything metal
- Use gentle cleaners on grout
- Look at the sealant in the corners now and then
- Do not ignore a tile that feels loose
If a tile starts to feel loose, get it looked at early. A loose tile cracks the grout around it and open a path for water.
Tiles can come away if failed grout is left. Once that happens, regrouting will not fix it, so it’s worth acting early.