Hertfordshire · England
Regrouting in Cholesbury
Raking out old, cracked or stained grout and regrouting tiled walls and floors for Cholesbury, backed by a 12-month guarantee. Call for a quick quote.
- Dirty, worn grout on a tiled floor
- Shower grout that has worn away
- Splashback grout that has darkened
Common questions in Cholesbury
Do you cover smaller places like Cholesbury?
Yes. Cholesbury is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you cover Cholesbury for regrouting?
Yes. Our work covers London and the South East, and Cholesbury is part of that. You can phone 0345 464 0079 or drop us an email and let us know what needs doing.
How long will you be here?
That depends on the amount of work, but most jobs take a few hours, or longer for a fully tiled room. We will tell you when we quote.
How long should I wait before showering?
We’ll tell you on the day. The wait depends on the products and conditions, so follow the time we give you.
Which products do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Is regrouting a chance to pick a new grout colour?
It can. Because the old grout is raked out, the new colour goes all the way into the joint rather than sitting on top.
How much does regrouting cost in Cholesbury?
It depends on the job, so we quote each one individually. To get one, call 0345 464 0079 or drop us an email with a short description of the job.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Regrouting in Cholesbury, done properly
We check the tiles before any grout comes out. Loose or hollow tiles are pointed out first, because regrouting won’t fix what’s behind them. Where the tiles are sound, regrouting gives the area a new lease of life. If you’re dealing with grout that makes sound tiles look old and cracked or crumbling grout lines, we can put it right, whatever the surface.
In a village or hamlet like Cholesbury, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
A one-year guarantee comes as standard, so you’re covered after we’ve gone.

- Location
- Cholesbury (HP23)
- Region
- Hertfordshire
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What affects the cost of regrouting
The price is agreed before any work begins. It takes into account:
- How much old sealant there is and how hard it is to remove
- The amount of work
- How easy the joints are to reach
- How many areas need sealing
The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before we start.
What we need to know
Photos by email are helpful but not essential. Try to tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- Where the job is, and your postcode
- Photos by email, if that’s easy
- Any previous sealing or DIY work
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or email us.
What regrouting looks like in Cholesbury
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Tring station, stained grout drags a rental down, and regrouting between lets puts that right. If you live in an older home near Church of St Lawrence, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Managing a site like Hawridge and Cholesbury Church of England School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Cholesbury is about 3 miles west of Berkhamsted, in Hertfordshire. Wherever you are in the HP23 postcode area, our applicators can take on regrouting. Cholesbury is one of 381 places in Hertfordshire where we work. You can also see our page for Reading, roughly 25 miles from Cholesbury.
Work in HP23 works the same way as everywhere else we cover. Local streets include Cholesbury Lane and Cholesbury Road. Other places close to Cholesbury include Buckland Common (1 mile west), Hawridge (1 mile east), St Leonards (1 mile west), Bellingdon (1 mile south-east) and Heath End (1 mile east). Within a short drive, we also cover Watford (13 miles south-east), Hemel Hempstead (8 miles east), St Albans (14 miles east), Harpenden (14 miles east), Berkhamsted (3 miles east) and Bushey (15 miles south-east).
Landmarks near Cholesbury
We work in homes and buildings around Full Moon Public House and the streets around them. Cholesbury’s nearest station is Tring station, about 3.4 miles north of the centre. Nearby you’ll also find Trenchard Museum (3.3 miles north-west) and Chiltern Hospital (4.8 miles south). The countryside around Cholesbury includes Pavis Wood and Dancersend.
Different surfaces, different methods
Corners and edges
Where tiles meet a bath, tray or worktop, the joint is sealed. Grout in that joint wouldn’t last.
Kitchen splashbacks
Kitchen grout collects grease and food splashes. Once it’s stained, new grout is often the only fix.
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Landlords, agents and businesses in Cholesbury
For anyone letting property in or around Cholesbury, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
What we do, step by step
Most of a good job is in the preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a few hours, or longer for a fully tiled room. Somewhere like Cholesbury needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- Every tile area is checked for hollow or loose tiles first.
- We rake out the grout evenly, protecting the tile edges.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- We finish with silicone in the moving joints.
Preparing for the visit
- For business premises, tell us about site rules or sign-in
- Tell us about any water getting in
- Move anything stored near the joints
Getting a quote
For regrouting in Cholesbury, call 0345 464 0079 or email us. Tell us what the problem is and where, and you’ll get a clear quote before work begins.
Related advice
What happens if it’s left?
New grout smeared over the old does not bond well. It sits thinly on top and soon flakes away, taking any repair with it. Removing the old grout to an even depth lets the new grout key in properly. Around Cholesbury, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
Why us?
- Anti-fungal silicone where joints get wet
- More than 20 years in sealant work
- We never seal over old sealant
- 180+ five-star Google reviews
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Do not use strong acidic cleaners on grout
- Use gentle cleaners on grout
- Clean with a soft brush, not anything metal
- Rinse soap off the tiles after each shower
A squeegee or cloth over the tiles after use keeps water off the grout. Ventilate the room well to help it dry out.
Grout that’s washing out of a shower shouldn’t be left. Every shower pushes more water into the gaps, and that water can reach the wall or the floor below.
