Hertfordshire · England
Regrouting in Bricket Wood
Professional regrouting in and around Bricket Wood, with every bit of old sealant taken out first and a 12-month guarantee.
- Grout that makes sound tiles look old
- Gaps where the shower grout has gone
- Floor grout that won’t come clean
How we handle regrouting in Bricket Wood
Grout fills the gaps between tiles, while sealant goes where tiles meet a bath, tray or worktop. When grout cracks or washes out, water can get in behind the tiles. Our job is to rake it out and put new grout in and renew the silicone at the edges. Common call-outs are for grout washed out of a shower and stained grout that cleaning won’t shift, across tiled floors, shower walls and bathroom floors.
Smaller places like Bricket Wood still have plenty of bathrooms that work hard every day. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: all the old material out, the joint cleaned and dried, then new sealant or grout.
There’s a 12-month guarantee on every job.
- Place
- Bricket Wood (AL2)
- Region
- Hertfordshire
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Surface by surface
Bathroom wall tiles
Tiles away from the shower stay drier but grout there still discolours. New grout freshens them up.
Corners and edges
We reseal edges at the same time as regrouting, so the whole area is finished together.
Bathrooms and kitchens in Bricket Wood
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Rented homes near Bricket Wood station change hands often, and clean grout and fresh sealant between tenancies make a bathroom look cared for again. Homes close to Church of All Saints include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant. Schools such as Mount Pleasant Lane Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Bricket Wood is about 3 miles north-east of Watford, in Hertfordshire. For regrouting in and around Bricket Wood, please call 0345 464 0079 or drop us an email for a quick quote. We are based in Crawley and cover Hertfordshire, Bricket Wood included. Our Hertfordshire coverage runs to 381 places, and Bricket Wood is one of them. Our London page covers work nearby (19 miles or so).
Postcode districts we cover here for regrouting: AL2. Regrouting is available to properties on Station Road, Brackendene and Moss Side and the roads around them. With the A405 close by, Bricket Wood is easy for our applicators to reach for regrouting. We also cover the places around Bricket Wood: Waterdale (1 mile west), How Wood (1 mile north-east), Chiswell Green (1 mile north), Frogmore (2 miles north-east) and Park Street (2 miles north-east). Further out, we also cover Watford (3 miles south-west), Hemel Hempstead (5 miles north-west), St Albans (4 miles north-east), Welwyn Garden City (10 miles north-east), Harpenden (8 miles north) and Hoddesdon (15 miles east).
What’s near Bricket Wood
We work in homes and buildings around Garston Park, The Black Boy Public House and Saint Michael's Catholic High School and the streets around them. The nearest railway station is Bricket Wood station, about 0.5 miles east. Other landmarks nearby include Radlett and District Museum (3 miles south-east) and Hilfield Castle (4 miles south). Green spaces nearby include Longspring Wood and Verulamium Lake.
Also near Bricket Wood
Other services in Bricket Wood
Why act early in Bricket Wood
If tiles are loose, regrouting alone is not the answer. We’ll tell you before any work starts, so you can decide what to do. On sound tiles, regrouting avoids the upheaval of a retile. In an older home around Bricket Wood, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we will explain what it covers.
Why us?
- Every job guaranteed for a year
- Approved under the ARBOMaster scheme
- Sanitary silicone with an anti-fungal additive in wet areas
- Trusted Arbo and Everbuild sealants
Read how sealant jobs are priced or our reviews.
Your questions about regrouting in Bricket Wood
Do you work for landlords with property near Bricket Wood station?
Yes, we work for landlords and agents. You can ring 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
Is Bricket Wood in your area for regrouting?
Yes, Bricket Wood is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or drop us an email and tell us what needs doing.
Should corners be grouted or sealed?
We seal corners with silicone. They flex and grout can’t take that movement.
Can you regrout if a few tiles are loose?
Loose or hollow tiles are a sign of a problem behind them. Grout on its own will not fix that and we will say so before going ahead.
Can you seal over the old sealant?
No, because it fails. The old sealant always comes out first, so the new joint bonds to clean surfaces.
What does regrouting cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we’ll talk you through it.
Where is Mr Mastic based?
We are a Crawley-based firm, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Do you regrout part of a bathroom, like the shower?
Yes. We will check the other tiled areas as well and let you know if more needs doing.
Landlord and commercial work in Bricket Wood
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Looking after it afterwards
Joint life depends on how it’s used and looked after. We suggest:
- Give the walls a quick rinse after use
- Wipe or squeegee the shower walls
- Clean with a soft brush, not anything metal
- Look at the sealant in the corners now and then
A squeegee or cloth over the tiles after use keeps water off the grout. Ventilate the room well so the grout dries between uses.
Cracked grout doesn’t stay cracked for long. Water gets in behind and the tiles can start to loosen, so regrouting early can save a retile.
What sealant work cannot fix
We’d rather tell you now than do work that will not last, so here’s what sealant can’t put right:
- Water coming from plumbing rather than grout
- Waterproofing that has failed below the tiling
- Tiles that are loose or hollow behind
If in doubt, ring 0345 464 0079 or email us and we will say what we think before booking.
What we seal
- Kitchen splashbacks
- Bathroom floors
- Wet rooms
- Bathroom wall tiles
- Shower walls
- Tiled floors
What affects the cost of regrouting
Every job gets its own quote. These are the things that affect it:
- Access and height
- When we can work, for business premises
- How much old sealant there is and how hard it is to remove
- The type of sealant required
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.
Asking for a quote
When you call or email, these details help:
- A few pictures by email, if you can
- Whether it’s a home or a business
- How we’d reach the joints
- Whether it has been sealed before
Want a quote for regrouting? Please ring 0345 464 0079 or email us and tell us about the job. We’ll explain what we’d do and send you a clear quote before work begins.
How it works
All our tools and materials come with us in the van, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a few hours, or longer for a fully tiled room. For a job in Bricket Wood, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- We finish with silicone in the moving joints.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Let us know about parking restrictions
- Mention any tricky access
Ask for a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand.