Isle of Wight · England
Regrouting in Branstone, Isle of Wight
Regrouting across Branstone and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- A grout colour that no longer suits the room
- Cracked grout along the bath or tray
- Discoloured grout on otherwise sound tiles
Honest limits
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Water coming from plumbing rather than grout
- Tiles that are chipped or split
- A leaking wet room membrane
If you are not sure, just phone 0345 464 0079 or email us and we will give you a straight answer before you book.
What we seal
- Bathroom wall tiles
- Wet rooms
- Tiled floors
- Shower walls
- Bathroom floors
- Kitchen splashbacks
Regrouting for homes and businesses in Branstone
We check the tiles before any grout comes out. Loose or hollow tiles are pointed out first, since new grout cannot fix a problem underneath. Where the tiles are sound, regrouting gives the area a new lease of life. Common call-outs are for good tiles let down by tired grout and cracked or crumbling grout lines, on wet rooms, bathroom wall tiles and bathroom floors.
Homes around Branstone are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
You get a one-year guarantee, the same in Branstone as everywhere else we work.
- Place
- Branstone (PO36)
- Region
- Isle of Wight
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Branstone
Other services in Branstone
Elsewhere in the Isle of Wight
Regrouting in all 125 places in the Isle of Wight
Our services in the Isle of Wight
Every area we cover
About regrouting
Why deal with it now?
With regrouting, your tiles stay where they are. Retiling is a much bigger job: stripping, making good, new tiles and new grout, and often a few days without a shower. When the tiles are fine, it’s the sensible first step. In a small place like Branstone, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, ring 0345 464 0079 or email us for an honest opinion and a quote.
Why Branstone clients choose us
- An ARBOMaster approved applicator
- Anti-fungal sanitary silicone in wet areas
- We leave the area clean and tidy
- Trusted Arbo and Everbuild sealants
Read how sealant jobs are priced and customer reviews.
Aftercare tips
Looking after new joints is easy:
- Keep an eye on the silicone along the edges
- Use gentle cleaners on grout
- Use a soft brush rather than a wire one
- Use a squeegee on the tiles after showering
Before we leave, you will know when the shower can be used. Please follow it, and go gently on the grout at first.
Cracked grout does not stay cracked for long. Water gets behind the tiles, and they can begin to come away and early regrouting can avoid a much bigger job.
Landlord and commercial work in Branstone
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
If you manage several properties in or around Branstone, several properties can be quoted together. Just tell us the addresses and what each one needs.
How we quote for regrouting
The quote reflects the job in front of us. We look at:
- How much old sealant there is and how hard it is to remove
- Access and height
- Mould in or behind the old joints
- Working hours on commercial sites
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
There’s no need for technical detail. It helps if you can tell us:
- How many joints, rooms or windows are involved
- Any previous sealing or DIY work
- The problem you’ve noticed
- Whether it’s a home or a business
Every job is quoted individually, so start by telling us what you need. Just ring 0345 464 0079 or drop us an email with the details and send pictures if you have them.
The process
On the day, we look over the joints with you first. We protect the surfaces around the joints before any work begins. The work usually takes a few hours for a shower enclosure, longer for a whole room. In a small place like Branstone, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We check the tiles are sound and flag any that are loose or hollow.
- The old grout comes out to a consistent depth, without damaging the tiles.
- We vacuum the joints and clean out the dust.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- The corners and edges get new silicone, because grout there would crack.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Let us know if you’ve seen damp or leaks
- Move anything stored near the joints
How to get a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or send us an email.
Read more
Branstone homes and their sealant
Branstone is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Shanklin station, stained grout drags a rental down, and regrouting between lets puts that right. For site and facilities teams at buildings such as Newchurch Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. If you live in an older home near All Saints' Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Branstone is about 5 miles south-east of Newport, in the Isle of Wight. Branstone gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 125 places across the Isle of Wight. For nearby work, see our Portsmouth page, about 12 miles away.
We work across PO36 for regrouting and the streets around it. We cover properties on Branstone Farm Lane and Stockmans Close and the roads around them. Nearby, we also carry out regrouting in Winford (1 mile east), Apse Heath (1 mile south-east), Princelett (1 mile south), Hale Common (1 mile west) and Newchurch (1 mile north). Further out, we also cover Newport (5 miles north-west), Ryde (5 miles north-east), Cowes (8 miles north-west), Ventnor (4 miles south), East Cowes (8 miles north-west) and Oakfield (5 miles north-east). If you are somewhere remote, the job takes a little more planning.
Local landmarks in Branstone
In Branstone, that means homes and buildings near Sandown Bay Academy, among other places. The nearest railway station is Shanklin station, about 1.9 miles south-east of the centre. Other landmarks nearby include Wight Aviation Museum (1.3 miles east) and Arthur Webster Memorial Hospital for Children (1.8 miles south-east). Green spaces nearby include Alverstone Mead and Stenbury Down.
Your questions about regrouting in Branstone
Do you work for landlords with property near Shanklin station?
Yes. We work for letting agents and landlords as well as householders. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Is Branstone within the area you cover?
Yes. Branstone is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is it OK to seal over old sealant?
No, and we never do. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.
Is resealing included with regrouting?
We generally do. New grout beside old sealant wouldn’t look right and wouldn’t keep water out.
Can you work on commercial sites?
Yes. We work in offices, washrooms, hotels and other commercial premises. We can talk about working times when we quote.
Will you leave a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
When can I use the shower again?
The wait depends on the materials and how warm the room is. We will tell you exactly how long when the job is done.
Do you guarantee regrouting?
Our one-year guarantee applies to all our work. We’re also fully insured.
What the job involves on each surface
Bathroom wall tiles
Walls outside the shower get less water but still stain and crack. Regrouting brings them back in line.
Kitchen splashbacks
A splashback can be regrouted without touching the worktop. The joint along the worktop is resealed with silicone.