Kent · England
Regrouting in Biddenden
Specialist regrouting for Biddenden: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Corners filled with grout instead of silicone
- Grout in a colour the owner wants to change
- Greasy, stained grout behind the hob
Why act early in Biddenden
Colouring the surface of old grout is a quick cosmetic fix. They do not fill cracks or stop water and stains often come back through. A proper regrout puts new grout in the joint. In a small place like Biddenden, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first.
Why book with us
- Approved under the ARBOMaster scheme
- Rated 4.9 stars on Google
- Over 20 years’ experience
- Anti-fungal sanitary silicone in wet areas
See what affects the cost and customer reviews.
How we handle regrouting in Biddenden
We take the old grout out to a consistent depth, taking care not to chip the tile edges. After vacuuming, new grout goes in and the tiles are wiped clean, and the corners get fresh silicone. We work on tiled floors, bathroom floors and wet rooms, and people most often call us about cracked grout along the bath or tray and stained grout that cleaning won’t shift.
Around Biddenden, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
Every job is covered by our one-year guarantee.
- Place
- Biddenden (TN27)
- Wider area
- Kent
- Cover
- One year on every job
- Quote
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Honest limits
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant will not put right:
- A leaking wet room membrane
- Movement in a stud wall or floor
- Tiles that have come away from the wall
If you are not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer before you book.
Surfaces we seal
- Bathroom wall tiles
- Tiled floors
- Bathroom floors
- Wet rooms
- Shower walls
- Kitchen splashbacks
FAQs for Biddenden
Will you come out to Biddenden?
Yes. Biddenden is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do regrouting in Biddenden?
Yes. We work across London and the South East, and Biddenden is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.
How long will you be here?
As a guide, most jobs take a few hours for a shower enclosure, longer for a whole room. Bigger jobs take longer, and we’ll tell you how long to expect.
Will there be a smell?
Possibly a little. It fades as the sealant cures.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Can you change the grout colour?
Yes, regrouting is the time to do it. Tell us the colour you’d like when you ask for a quote.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
When can I use the shower again?
Before we leave, we’ll tell you how long to wait. Both the grout and the silicone need time to cure before the shower is used.
What the job involves on each surface
Bathroom floors
Floor grout takes foot traffic as well as water. It gets worn and dirty.
Wet rooms
Wet room grout and sealant need to be in good order. We renew both.
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
What regrouting looks like in Biddenden
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Managing a site like John Mayne Church of England Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For an older house near a landmark such as Parish Church of All Saints, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Rented homes near Headcorn station change hands often, and stained grout drags a rental down, and regrouting between lets puts that right.
Biddenden is about 10 miles west of Ashford, in Kent. We provide regrouting to homes and businesses in Biddenden. Across Kent, we cover 922 places, and Biddenden is one of them. For nearby work, see our Crawley page, about 36 miles away.
Work in TN27 works the same way as everywhere else we cover. If you need regrouting at a property on High Street, The Meadows and Cloth Hall Gardens or anywhere close by, we can help. If you’re just outside Biddenden, we cover Curteis' Corner (1 mile north-east), Woolpack Corner (1 mile south-east), Standen (1 mile north-east), Hareplain (1 mile north-west) and Stede Quarter (1 mile east). We also work in nearby towns such as Maidstone (11 miles north-west), Ashford (10 miles east), Kings Hill (15 miles north-west), Foley Park (12 miles north-west), Paddock Wood (12 miles west) and Tenterden (4 miles south-east).
Around Biddenden
Around Biddenden, our work takes us to homes and buildings near The Red Lion Inn, among other places. For rail, the closest station is Headcorn station, about 3.5 miles north. A little further out are Benenden Hospital (2.3 miles south-west) and Sissinghurst Castle (2.6 miles west).
How we quote for regrouting
You will get a clear quote before work begins. It’s based on:
- The product the joint needs
- How many rooms, windows or areas are involved
- How much old sealant there is and how hard it is to remove
- Any mould that needs treating
Doing several joints on one visit is normally more efficient than separate visits. You’ll get one clear quote for the whole job.
Asking for a quote
To help us quote quickly, please include:
- Access, such as stairs, a lift or height
- If it’s domestic, commercial or a hotel
- The rough size of the job
- Whether it has been sealed before
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
How the visit works
On the day, we look over the joints with you first, so you know exactly what we’re doing. We protect the surfaces around the joints before any work begins. The work usually takes a few hours, or longer for a fully tiled room. In a small place like Biddenden, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We check the tiles for any that are hollow or loose.
- We rake out the grout evenly, protecting the tile edges.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- We finish with silicone in the moving joints.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Keep pets and children clear of the area while we work
- Tell us about access, such as stairs, a lift or high-level joints
Getting a quote
There’s no standard price list. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.
Read more
Towns and villages near Biddenden
More services for Biddenden
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Get any tile that moves checked promptly
- Keep an eye on the silicone along the edges
- Open a window or run the fan to clear steam
- Clean grout with a mild bathroom cleaner
Use a gentle cleaner on the grout with a soft brush. Keep harsh bleach and acid limescale removers away from it because they wear grout away.
If grout in the shower is washing out, act soon. Each shower drives water into the open joints, and that water can reach the wall or the floor below.