Aberdeenshire · Scotland
Tarves New Build Mastic
We cover Tarves for plot mastic for developers and snagging failed sealant in new homes. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Untidy sealant flagged on a snagging list
- Gaps behind new kitchen upstands
- Gaps opening as the house dries out and settles
For landlords and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
New build mastic for homes and businesses in Tarves
Some new-home owners let the house settle before resealing. For small cosmetic gaps, that is reasonable, but a failed shower or bath seal shouldn’t wait. We work on windows & doors, show homes and skirting & floors, and the jobs we see most are second-fix sealing on new plots and sealant that never bonded to the surface.
Timber frame is common in newer Scottish homes, and it settles over the first years, which shows as gaps at skirtings and floor joints. Older stone-built homes, meanwhile, often have timber floors that move with the seasons.
Your job is guaranteed for a year, as with all our work.
- Location
- Tarves (AB41)
- Wider area
- Aberdeenshire
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What we do, step by step
When we arrive, we start by going over the job with you. We protect the surfaces around the joints before work begins. Most jobs take anything from a few hours to several days, depending on the number of plots. Somewhere like Tarves may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start by agreeing which joints are on the list, from the snagging sheet or plot schedule.
- Failed or untidy sealant is cut out completely.
- Surfaces are cleaned of building dust and primed where needed.
- A sealant chosen for each area goes in and is tooled smooth.
- Finally, each room is checked and you’re given the cure time.
Preparing for the visit
- Tell us if parking is tricky
- Mention if the joints have been sealed before
- Try not to wet indoor joints just before the visit
Get a quote
Asking for a quote is easy: let us know what needs doing and where. Photos by email help us understand the job.
Read more
Do you need new build mastic in Tarves?
The first winter with the heating on dries a new home quickly. Gaps open along skirting, frames and worktops and cracked sealant shows up.
The problems people normally mention when they call include:
- Messy sealant that spoils new finishes
- Worktop and upstand sealant coming away
- Cracks appearing as a new home settles
- Gaps between new skirting and floors
Whether the job is in Tarves itself or nearby, the right material for each joint matters as much as a neat finish.
What your quote should include
- Whether VAT is included
- Who does the work, and how experienced they are
- What happens if they find a problem under the old sealant
- What preparation is included
New homes and floors in Tarves
Many new homes in Scotland are timber-framed, so skirting and sealant joints can open up as the building settles.
In and around Tarves, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Tarves is about 8 miles north-east of Inverurie, in Aberdeenshire. Whether you’re in the middle of Tarves or further out, we cover new build mastic for every kind of property, from flats and houses to offices and hotels. Tarves is one of 161 towns and villages in Aberdeenshire where we work. For nearby work, see our Aberdeen page, about 15 miles away.
Here we cover the AB41 postcode area for new build mastic. If you need new build mastic at a property on Stuart Crescent, Duthie Road and Braiklay Avenue or a nearby road, we can help. We also cover the places around Tarves: Pitmedden (3 miles south-east), Udny Green (3 miles south), Methlick (4 miles north), Oldmeldrum (4 miles south-west) and Hattoncrook (4 miles south). Further out, we also cover Inverurie (8 miles south-west), Westhill (15 miles south), Ellon (6 miles east), Turriff (15 miles north-west), Garioch (8 miles south-west) and Kemnay (12 miles south-west).
Near you in Tarves
Other landmarks nearby include Old School Museum (within half a mile north-east) and Tillyhilt Castle (0.8 miles north-west). Open spaces near Tarves include Upper Lake.
Tarves: your questions answered
Will you come out to Tarves?
Yes, we do. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is there a guarantee on new build mastic in Tarves?
All our work, in Tarves and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Do you use white or clear sealant?
The colour is chosen to suit the tiles, worktop or frame. Tell us what you’d like when you get a quote.
Do you work for landlords and businesses?
Yes, we do. We work in homes, commercial premises and hotels.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is there any odour?
That depends on the sealant. Some smell for a while, some hardly at all.
Can new sealant go on top of the old bead?
No. New silicone will not bond to old silicone, so sealing over the top fails quickly. We cut the old bead out completely.
What happens if it’s left?
The builder is normally the first port of call while the snagging or warranty period runs. If it’s slow, or the same joint keeps failing, a proper reseal from a specialist is the next step. Around Tarves, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.
Why Tarves clients choose us
- Old sealant always removed completely
- We agree the colour with you first
- 20+ years of sealant experience
- A 12-month guarantee on all work
See our cost guide and our reviews.
What we can’t put right
It helps to know what we cannot do too:
- Damaged fittings that need replacing
- Deciding who is responsible under a builder’s warranty
- Leaks from pipes, valves or wastes, which need a plumber
If you are not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer.
Joints and surfaces we work on
- Show homes
- Kitchens
- Windows & doors
- Plot handovers
- Bathrooms & en suites
- Skirting & floors
How we quote for new build mastic
You will get a clear quote before work begins. It takes into account:
- Whether old sealant or filler has to be cut out
- The number of rooms or windows
- Mould in or behind the old joints
- Any working-time requirements on site
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Asking for a quote
Before you ask for a quote, have a think about:
- If someone has resealed it before
- Any access issues, like height or stairs
- The problem you’ve noticed
- The address or postcode of the job
To get a quote, drop us a line at info@mrmastic.co.uk with the location and a short description of the problem. You’ll have a clear quote before we start.
Places near Tarves
What else we do in Tarves
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.