Kent · England
New Build Mastic in Ridgeway
Problem with your new-build sealant joints in Ridgeway? We remove the old material, prepare the joints and seal them properly.
- Internal frame sealant that has split
- Untidy sealant flagged on a snagging list
- Cracked caulk along new skirting
How we handle new build mastic in Ridgeway
We carry out plot mastic and second-fix sealing for builders, and snagging reseals for new-home owners. In both, preparation makes the difference since hurried prep is behind a lot of new-build failures. We work on show homes, kitchens and plot handovers, and people most often call us about cracked caulk along new skirting and messy sealant that spoils new finishes.
Older homes in small places like Ridgeway often have timber floors that move with the seasons, which is why skirting and threshold joints need a flexible sealant, not filler.
The work is covered for a year after we finish. If anything is not right with it, call 0345 464 0079 or drop us an email.
- Where
- Ridgeway (TN25)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Resist patching a failed seal with a tube from the DIY shop
- Avoid scourers and strong chemicals on sealant
- Watch for new gaps as the house dries out
- Record problems with dated photos
Clean the sealant with a mild detergent and a soft cloth. Keep scourers and harsh chemicals off it, which can damage the surface.
A failed seal in a new home lets water into joists, plasterboard and ceilings. Catching it early keeps the fix to the sealant and the new finishes intact.
New build mastic in Ridgeway: local notes
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you’ve bought a new home near Westenhanger station, the sealant around baths, showers and frames is worth checking in the first year or two.
Ridgeway is about 4 miles east of Ashford, in Kent. From the centre of Ridgeway to the outskirts, we cover new build mastic for every kind of property. Ridgeway is one of 922 towns and villages in Kent where we work. You can also see our page for Chelmsford, roughly 47 miles from Ridgeway.
Here we cover the TN25 postcode area for new build mastic. Nearby, we also carry out new build mastic in Smeeth (1 mile east), Brabourne Lees (1 mile east), Lilyvale (1 mile east), Bircholt Forstal (1 mile north-east) and Mersham (1 mile west). Within a short drive, we also cover Ashford (4 miles west), Canterbury (12 miles north-east), Dover (15 miles east), Folkestone (9 miles east), Faversham (14 miles north) and Hythe (6 miles south-east).
Near you in Ridgeway
The closest station to Ridgeway is Westenhanger station, roughly 3.9 miles south-east. Well-known places in the area include William Harvey Hospital (2.4 miles north-west) and Lympne Castle (4.4 miles south-east). Green spaces nearby include Hatch Park.
Also near Ridgeway
What else we do in Ridgeway
Work for landlords, hotels and businesses
Letting agents and landlords in Ridgeway can book us as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
Housing providers, facilities teams and property managers book us too in Ridgeway and across Kent. We can quote a run of properties together.
Common questions in Ridgeway
Do you cover Ridgeway for new build mastic?
Yes. Our work covers London and the South East, and Ridgeway is part of that. You can phone 0345 464 0079 or email us and let us know what needs doing, and we will send you a clear quote.
I let a flat near Westenhanger station. Can you help?
Yes, we work for letting agents and landlords. Just ring 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.
Will you just run a new bead over the existing one?
No. The old sealant is cut out fully, the joint cleaned and primed where needed, and a new bead applied.
Do you work for developers?
Yes. We seal plots to the developer’s programme ready for handover. Tell us the plots and the joints involved and we’ll quote.
Is it normal for sealant to crack in a new home?
Lots of new homes see sealant crack early. Poor preparation at handover adds to it.
Should I go to my builder first?
If you are still within the builder’s snagging or warranty period, report it to them first. If they’re slow or the fix does not last, we can help.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us, and we are fully insured.
Do you guarantee your work?
Yes: twelve months. If there’s a problem with our work in that time, tell us and we’ll put it right.
Why it’s worth doing now in Ridgeway
For developers, getting the sealant right first time saves return visits. Every return visit for a failed seal takes time, and they’re avoidable with good preparation. In a small place like Ridgeway, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or drop us an email and we will talk you through it.
Why Ridgeway clients choose us
- ARBOMaster approved applicator
- Sealant colour chosen to suit
- 20+ years of sealant experience
- 180+ five-star Google reviews
Different surfaces, different methods
Windows and doors
Draughts around new frames are often a sealant gap. We look at the joints and reseal where needed.
Skirting and floors
Wet-area floor joints need a flexible seal. They get a flexible, water-resistant sealant.
What happens on the day
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for most snagging lists, longer for a run of plots, and the area is left clean. In a small place like Ridgeway, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Each joint is checked for movement before any work starts.
- Old sealant is cut out and the joints cleaned.
- We make sure the joints are dry and prime them if needed.
- New sealant goes in, with baths filled first so they’re at their heaviest.
- We check every joint and leave you with the cure times.
How to prepare
- Try not to wet indoor joints just before the visit
- Mention if the joints have been sealed before
- Tell us about access, such as stairs, a lift or high-level joints
Ask for a quote
Getting a quote is simple: let us know what needs doing and where. Photos by email help us understand the job, and we will come back to you with a quote.
Related advice
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
When to call us in Ridgeway
New homes are full of moisture from plaster, screed and concrete, which takes a year or two to dry out. As it does, timber shrinks and joints open and the sealant has to cope with the movement.
The problems people generally mention when they call include:
- Messy sealant that spoils new finishes
- Sealant work across a run of new homes
- New-build shower sealant that has already split
- Beads laid onto grit and dust from the build
Around Ridgeway, as everywhere, new build mastic is only as good as the preparation behind it.
Before you book anyone
- What guarantee comes with the work
- How the colour is chosen
- How hidden problems are handled
- When the joint can take water or movement