Kent · England
Window Mastic in Ridgeway
Window and door frames in Ridgeway need attention? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Cracked internal joints between frame and plaster
- Rushed sealant from a window installation
- Rain getting in at the frame or under the sill
Window mastic in Ridgeway
A cold draught around a closed window often comes from the frame edge. Resealing that joint can make a room feel noticeably less draughty. Where the air is getting in through the window itself, we’ll say so. If you’re dealing with cracked or shrunken mastic around the frame and whistling draughts around closed windows, we can put it right, whatever the surface.
In a village or hamlet like Ridgeway, older cottages and farmhouses often have timber windows set in stone or brick. Not every older frame suits a modern silicone bead, so the sealant has to be chosen to suit the building.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Place
- Ridgeway (TN25)
- Region
- Kent
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
How to look after the new joints
After the cure time, these simple habits help:
- Make sure the drainage slots are not blocked
- Keep timber frames painted
- Walk round the house once a year and look at the joints
- Don’t use solvent cleaners on the joint
Silicone can’t normally be painted, so if you’re planning to paint the frames or walls, tell us beforehand. There are paintable sealants for joints that need it.
Signs to watch for: split or missing mastic, gaps, damp patches inside or black mould on the reveal. If you notice one, it’s time to get the joint looked at.
How we quote for window mastic
Your quote is based on your job. We take into account:
- The size of the job
- How much old sealant there is and how hard it is to remove
- Mould in or behind the old joints
- When we can work, for business premises
The cost reflects the work involved, not guesswork. That’s why we ask about the job first and agree the price before starting.
Helping us quote
To make quoting easier, please include:
- Where the property is
- The problem you’ve noticed
- Any previous sealing or DIY work
- If it’s domestic, commercial or a hotel
To get a quote, phone 0345 464 0079 or email us with the location and a short description of the problem. You will have a clear quote before any work starts.
Nearby places to Ridgeway
What else we do in Ridgeway
Frames and glazing around Ridgeway
With historic houses such as Westenhanger Castle (about 3.6 miles south-east) nearby, there’s older building stock in the area around Ridgeway as well as newer homes. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Rented homes near Westenhanger station change hands often, and renewing tired window mastic between tenants heads off draught and damp complaints. Homes close to Church of St Mary include some older properties, and the joint between an old wall and a newer frame is normally the first place rain gets in. For site and facilities teams at buildings such as Smeeth Community Primary School, the mastic around its windows and doors needs looking after like any other building’s.
Ridgeway is about 4 miles east of Ashford, in Kent. Anywhere in TN25, our applicators can take on window mastic. Ridgeway is one of 922 towns and villages in Kent we cover for window mastic. For nearby work, see our Chelmsford page (47 miles or so).
Work in TN25 works the same way as everywhere else we cover. We also cover Smeeth (1 mile east), Brabourne Lees (1 mile east), Lilyvale (1 mile east), Bircholt Forstal (1 mile north-east) and Mersham (1 mile west). Larger places within reach include Ashford (4 miles west), Canterbury (12 miles north-east), Dover (15 miles east), Folkestone (9 miles east), Faversham (14 miles north) and Hythe (6 miles south-east).
Local landmarks in Ridgeway
The closest station to Ridgeway is Westenhanger station, about 3.9 miles south-east of the centre. Well-known places in the area include William Harvey Hospital (2.4 miles north-west) and Lympne Castle (4.4 miles south-east). The countryside around Ridgeway includes Hatch Park.
For landlords and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
FAQs for Ridgeway
Will you come out to Ridgeway?
Yes, Ridgeway is covered. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you do window mastic in Ridgeway?
Yes, Ridgeway is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job, and we will give you a clear price.
Do you seal inside as well as outside?
Yes. Draughts often come through the inside gap too, so it can be worth sealing both.
Is the new sealant paintable?
It depends on the sealant. Some hybrid sealants can be painted; silicone can’t. Tell us if you’re decorating and we will choose accordingly.
How long will my window job take?
The work takes most of a day for a typical house, less for a few frames. Access and the amount of old mastic make the biggest difference.
Do you have sealant for grey or black windows?
Usually, yes. Tell us the frame colour when you get in touch and we will match it as closely as we can.
Do I have to be there?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Can you seal over the old sealant?
No, because it fails. The old sealant always comes out first.
The process
On the day, we start by going over the job with you. We protect the surfaces around the joints before any work starts. Most jobs take most of a day for a typical house, less for a few frames. For a village or hamlet like Ridgeway, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Each frame is looked over and we agree which ones need resealing.
- The old mastic is cut out and scraped back to clean surfaces.
- Where the gap is deep, backing rod goes in first.
- A flexible exterior sealant is applied in a colour to suit the frame.
- We tool each bead neatly and check every joint is closed.
Preparing for the visit
- Let us know about parking restrictions
- Clear items away from the joints we are working on
- Mention if the joints have been sealed before
How to get a quote
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we will take it from there.
Read more
Why deal with it now?
Running fresh sealant over the old joint is tempting, but new sealant can’t bond to old, crumbling mastic. It soon lifts and the leak carries on behind it. Proper resealing starts with removing the old joint. In a small place like Ridgeway, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
The cost depends on how much there is to do, how much old material has to come out and access to the work. You will have a clear quote before any work starts, so you know where you stand.
Why book with us
- Full insurance on every job
- Arbo and Everbuild products
- Tidy, careful work
- 4.9 on Google from 180+ five-star reviews
See our cost guide and our reviews.
Honest limits
Before you book, it’s worth knowing the limits:
- A sash or casement that won’t close properly
- Soft or decayed wood in the frame
- Penetrating damp from a failed cavity tray or render
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
Joints and surfaces we work on
- uPVC windows
- Composite doors
- Timber windows & doors
- Aluminium frames
- Patio & French doors
- Window sills