Aberdeen · Scotland
New-build mastic & snagging in Potterton, Aberdeen
Plot mastic for developers and snagging failed sealant in new homes for Potterton, backed by a one-year guarantee. Ask us for a quote.
- Shower seals failing in the first year or two
- Frame joints opening as the plaster dries
- Messy sealant that spoils new finishes
New build mastic in Potterton, done properly
Developers send us the plot schedule and we work through it. We seal bathrooms, kitchens, windows, doors and skirting so plots are ready to hand over using the right product for each joint. If you have gaps between new skirting and floors and cracks appearing as a new home settles, we can put it right.
Around smaller Scottish places like Potterton, new homes tend to be single plots or small developments. Each needs its sealant and floor joints finished as carefully as on a big site.
All our work is covered by our one-year guarantee, wherever you are in Aberdeen.
- Place
- Potterton (AB23)
- Region
- Aberdeen
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Surface by surface
Kitchens
Worktop, upstand and sink joints in new kitchens often get a hurried bead. We remove it and reseal with a kitchen-suitable sealant.
Plot handovers
We work through plots to your schedule, sealing each room ready for handover. Each joint is cleaned and primed where needed.
Looking after it afterwards
After the cure time, these simple habits help:
- Open a window or run the fan after bathing
- Do not seal over failed sealant yourself
- Keep water off fresh sealant until it has cured
- Avoid scourers and strong chemicals on sealant
Clean the sealant with a mild detergent and a soft cloth. Keep scourers and harsh chemicals off it as they wear the bead.
A seal that splits early is often a sign of movement. Have it resealed, and the tray or bath checked, before it gets worse.
Nearby places to Potterton
More services for Potterton
What we do, step by step
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take anything from a few hours to several days, depending on the number of plots. In smaller Scottish places, parking is normally less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- Each joint is checked for movement before work begins.
- Old sealant is cut out and the joints cleaned.
- Joints are dried and primed where the product calls for it.
- New sealant goes in, with baths filled first so they’re at their heaviest.
- The finished joints are checked and the cure times given.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Mention any leaks or damp you’ve noticed
- Keep children and pets away from the work area
Get a quote
There’s no standard price list, because every job is different. Instead, we give you a clear quote for your job. To arrange one, drop us a line at info@mrmastic.co.uk.
Related advice
Joints and finishes in Potterton homes
Potterton is close to the coast. New homes near the sea put their outside mastic to work from day one, so it’s worth checking at snagging. Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.
If you’ve bought a new home near Dyce station, the sealant around baths, showers and frames is worth checking in the first year or two.
Potterton is about 5 miles north of Aberdeen, in Aberdeen. Jobs in Potterton get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Potterton is one of 63 places in Aberdeen where we work.
Work in AB23 is quoted and booked the same way as anywhere else. You’ll find streets such as Church Road, Panmure Gardens and Kirkhill Gardens, all of which we cover. Other places close to Potterton include Belhelvie (1 mile north), Blackdog (1 mile south-east), Balmedie (2 miles north-east), Hill of Keir (2 miles north) and Whitecairns (2 miles north-west). Larger places within reach include Aberdeen (5 miles south), Rosemount (6 miles south), Berryden (5 miles south), Ferryhill (7 miles south), New Aberdeen (6 miles south) and Dyce (4 miles south-west).
Landmarks near Potterton
The nearest railway station is Dyce station, roughly 4 miles south-west. Other landmarks nearby include Kingseat Hospital (3.2 miles north-west). For a walk, there’s Corby Loch and Perwinnes Hill.
When to call us in Potterton
New homes are full of moisture from plaster, screed and concrete, which takes a year or two to dry out. Drying timber shrinks and pulls joints apart, and sealant that can’t keep up splits.
The most common problems we see are:
- Gaps behind new kitchen upstands
- Sealant that never bonded to the surface
- Untidy sealant flagged on a snagging list
- Cracked caulk along new skirting
Around Potterton, as everywhere, new build mastic is only as good as the preparation behind it.
What your quote should include
- When the joint can take water or movement
- The length of the guarantee
- How the colour is chosen
- Whether VAT is included
What sealant work cannot fix
Honest advice matters more to us than a booking, so here’s what new sealant will not do:
- A tray or bath that is not properly supported, until it’s fixed
- Broken tiles or a split tray
- Deciding who is responsible under a builder’s warranty
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly before booking.
Where we work in Potterton
- Bathrooms & en suites
- Show homes
- Plot handovers
- Skirting & floors
- Windows & doors
- Kitchens
FAQs for Potterton
Can you help a landlord with a rental near Dyce station?
Yes. We work for landlords and agents as well as homeowners, and several properties can go on one quote. You can email us at info@mrmastic.co.uk with the details for a clear quote.
Do you cover Potterton for new build mastic?
Yes, Potterton is within the area we cover. Our work covers the whole of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.
Why has my new-build shower seal failed already?
A new house dries and settles for a year or two, and sealant is often rushed onto dusty, unprimed surfaces. Both lead to early failure.
How much does new build mastic cost in Potterton?
Every job is different, so each one gets its own quote. For a quick quote, drop us a line at info@mrmastic.co.uk with a short description of the job.
Should I go to my builder first?
While the snagging or warranty period runs, the builder should be your first contact. If they’re slow or the fix doesn’t last, we can help.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Do you work for developers?
Yes. We work through plots to your schedule. Get in touch with the number of plots and the scope for a clear quote.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Landlords, agents and businesses in Potterton
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.