Medway · England
New-build mastic & snagging in Peters Village, Medway
Problem with your new-build sealant joints in Peters Village? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.
- Sealant that never bonded to the surface
- Sealant work across a run of new homes
- Internal frame sealant that has split
How we handle new build mastic in Peters Village
Building dust is behind a lot of failed new-build sealant. We clean every joint thoroughly and prime where the surface and product need it, so the sealant actually sticks instead of bonding to the dust. Typical jobs include leaking shower tray seals in a new home and frame joints opening as the plaster dries, across plot handovers, skirting & floors and show homes.
For a new home in or near Peters Village, it’s worth checking the sealant early. Gaps at skirtings, shower seals pulling away and missing mastic around frames are common snags.
We stand behind the work with a one-year guarantee, so you are covered after we have gone.
- Location
- Peters Village (ME1)
- Wider area
- Medway
- Cover
- One year on every job
- Price
- A clear price before we start
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026

How it works
There’s no need to move everything out before we come, only the area right around the joints. Everything nearby is protected, and the work takes a few hours in a single home in most cases. Parking around Peters Village is usually easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We start by agreeing which joints are on the list, from the snagging sheet or plot schedule.
- The old bead comes out in full, with no layer left behind.
- We clean off dust from the build and prime the surfaces where the product needs it.
- New sealant suited to each joint is applied and tooled neatly.
- We check every joint and tell you how long each needs to cure.
Preparing for the visit
- On commercial sites, let us know about site rules
- Let us know about stairs, lifts or work at height
- Let us know about earlier repairs to the joints
Get a quote
There’s no standard price list. Instead, we give you a clear quote for your job. To get started, ring 0345 464 0079 or drop us an email.
Related advice
What sealant work can’t fix
To be straight with you, there are a few things sealant won’t fix:
- Broken tiles or a split tray
- Structural cracks in walls or ceilings
- Disputes or warranty claims with your builder
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we’ll tell you honestly before booking.
Where we work in Peters Village
- Show homes
- Kitchens
- Skirting & floors
- Bathrooms & en suites
- Plot handovers
- Windows & doors
Surface by surface
Plot handovers
Plot mastic is carried out to the developer’s schedule. Joints are prepared properly before sealing.
Show homes
Tired or marked sealant in a show home can be renewed. We cut it out and reseal neatly.
Common problems we fix in Peters Village
Baths and trays settle under load once the home is lived in. If a bath wasn’t filled when it was sealed, the bead is stretched the first time it’s used and the sealant may split.
People usually contact us after spotting one of these:
- Beads laid onto grit and dust from the build
- Cracked sealant around new window and door frames
- Leaking shower tray seals in a new home
- Untidy sealant flagged on a snagging list
In and around Peters Village, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
What to look for in a quote
- Whether all the old sealant comes out first
- What happens if they find a problem under the old sealant
- Whether they’re fully insured
- Is VAT in the price?
Landlord and commercial work in Peters Village
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll quote.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Also near Peters Village
More services for Peters Village
Keeping the joints in good condition
Good habits help new joints last longer. A few tips:
- Look at the sealant regularly in the first couple of years
- Ventilate bathrooms well, especially in the first year
- Do not wait for the house to settle if water is getting through
- Clean sealant with mild detergent, not abrasives
Clean the sealant with a mild detergent and a soft cloth. Avoid abrasive pads and strong solvents.
Lifting sealant traps moisture and mould behind it. Dealing with it before it goes black saves a harder job later.
New build mastic around Peters Village
Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
For new homes near Snodland station, it’s worth checking the sealant early, while snags are still fresh.
Peters Village is about 3 miles west of Chatham, in Medway. From the centre of Peters Village to the outskirts, we cover new build mastic for every kind of property, from flats and houses to offices and hotels. Across Medway, we cover 68 places, and Peters Village is one of them. There’s also a page for London, about 26 miles away.
Postcode districts we cover here for new build mastic: ME1. You will find streets such as Greystone Square, Burners Walk and Tusk Walk. If you are just outside Peters Village, we cover Scarborough (1 mile east), Wouldham (1 mile north), Holborough (1 mile west), Burham (1 mile south-east) and Halling (1 mile north-west). Further out, we also cover Gillingham (5 miles north-east), Chatham (3 miles east), Rochester (4 miles north-east), Rainham (6 miles east), Strood (4 miles north) and Luton (4 miles north-east).
Landmarks near Peters Village
Locally, jobs take us to homes and businesses close to The Five Bells pub, Holborough Marshes and The Holmesdale School. For rail, the closest station is Snodland station, about 1 mile south-west. A little further out are Medway megaliths (2.3 miles south-east) and Pentagon Shopping Centre (4 miles north-east). Green spaces nearby include Burham Down and Blue Bell Hill.
Why act early in Peters Village
If you are still in the builder’s snagging or warranty period, ask them to put it right first. If it’s slow, or the same joint keeps failing, a proper reseal from a specialist is the next step. In a smaller place like Peters Village, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
Why Peters Village clients choose us
- Every job guaranteed for a year
- Colour picked to suit the job
- Neat joints and a tidy finish
- Domestic, commercial and hotel work
Questions from Peters Village
Can you help a landlord with a rental near Snodland station?
Yes, we work for landlords and letting agents. Just ring 0345 464 0079 or email us and tell us about the property, and we will give you a clear quote.
Is Peters Village in your area for new build mastic?
Yes, Peters Village is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear price.
Where are you based?
Mr Mastic is based in Crawley. Our applicators cover Peters Village, along with the rest of our area.
How long should I leave it?
That depends on the sealant used, so please follow the time we give you when we finish.
Should I try DIY first?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
How much does new build mastic cost in Peters Village?
Size, access and the old material all affect the cost. Ask us for a quote and we will talk you through it.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Do you work for developers?
Yes. We work through plots to your schedule. Tell us the plots and the joints involved and we will quote.
