Highland · Scotland
Nethy Bridge New Build Mastic
Plot mastic for developers and snagging failed sealant in new homes for homes and businesses in Nethy Bridge and across Highland. Fully insured, ARBOMaster approved and guaranteed for a year.
- New-build shower sealant that has already split
- Plot mastic for developers ahead of handover
- Sealant that never bonded to the surface
How we handle new build mastic in Nethy Bridge
A new build should have a neat, sound bead at every joint. When the finish is smeared, patchy or already cracking, it’s worth putting right early, before water gets into the floor or walls. If you have messy sealant that spoils new finishes and internal frame sealant that has split, we can help, whatever the surface.
For a place like Nethy Bridge, the journey and access are planned in advance. Inside work goes ahead in any weather; outside mastic needs a dry day.
You are covered for a year from the day we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.
- Where
- Nethy Bridge (PH25)
- Region
- Highland
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026

The process
Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for most snagging lists, longer for a run of plots. Outdoor work around Nethy Bridge depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors is not affected.
- First, the list of joints is agreed from your snagging sheet or plot schedule.
- Every bit of the old builder’s sealant is cut out down to clean surfaces.
- Joints are vacuumed and cleaned of building dust.
- We prime where needed and apply a sealant suited to each joint.
- Each bead is tooled and the cure times explained.
Before we arrive
- For business premises, tell us about site rules or sign-in
- For indoor joints, keep the area dry beforehand if you can
- Mention if the joints have been sealed before
How to get a quote
Getting a quote is simple: let us know what needs doing and where. Photos by email help us understand the job, and we’ll come back to you with a quote.
Read more
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. A few tips:
- Get a leaking seal dealt with right away
- Raise failed sealant with the developer while you are covered
- Record problems with dated pictures
- Check bath and shower seals every few months as the house settles
Don’t stand on the bath edge or the lip of the tray in the first few weeks. Report any movement in a bath or tray.
A seal that splits early is often a sign of movement. Getting it resealed properly, and any movement checked, stops it recurring.
New build mastic in Nethy Bridge: local notes
Timber frame is common in newer Scottish homes, so skirting and sealant joints can open up as the building settles.
In and around Nethy Bridge, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Nethy Bridge is about 24 miles south of Nairn, in Highland. Jobs in Nethy Bridge get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Highland, we cover 253 places, and Nethy Bridge is one of them. For nearby work, see our Aberdeen page (57 miles or so).
All of PH25 is within our area for new build mastic. You’ll find streets such as Station Road, Dirdhu Court and Dorback Place, all of which we cover. Neighbouring places we cover for new build mastic include Skye of Curr (2 miles north-west), Dulnain Bridge (3 miles north), Boat of Garten (4 miles west), Grantown-on-Spey (5 miles north) and Duthil (5 miles north-west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Near you in Nethy Bridge
Typical jobs here are in homes near Abernethy Old Kirk and the streets around them. Other landmarks nearby include Ian Charles Community Hospital (5.2 miles north) and Castle Roy (0.9 miles north). Not far away are Loch Garten.
Landlords, agents and businesses in Nethy Bridge
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
What we can’t put right
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- Broken tiles or a split tray
- Settlement cracks that need a surveyor
- Deciding who is responsible under a builder’s warranty
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think before you book.
Joints and surfaces we work on
- Windows & doors
- Skirting & floors
- Show homes
- Bathrooms & en suites
- Plot handovers
- Kitchens
Should I try it myself first?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Nearby places to Nethy Bridge
Other services in Nethy Bridge
How we quote for new build mastic
Call for a quick quote. What matters most is:
- The product the joint needs
- Whether old sealant or filler has to be cut out
- Mould in or behind the old joints
- How many areas need sealing
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
Photos help, but a description is a good start. Try to tell us:
- Photos by email, if that’s easy
- If it’s domestic, commercial or a hotel
- The rough size of the job
- Any access issues, like height or stairs
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work before giving you a price.
Common problems we fix in Nethy Bridge
When the heating goes on in the first winter, the house dries fast. Skirting, frames and worktops pull away slightly and cracked sealant shows up.
People generally contact us after spotting one of these:
- Untidy sealant flagged on a snagging list
- Sealant work across a run of new homes
- Cracked caulk along new skirting
- Gaps opening as the house dries out and settles
For jobs in and around Nethy Bridge, choosing the right material for each joint is as important as a tidy finish.
Comparing quotes
- Whether they seal over old material or remove it
- How the joint is cleaned and prepared
- Who does the work, and how experienced they are
- Which colour the sealant will be
Nethy Bridge questions
Is Nethy Bridge in your area for new build mastic?
Yes, Nethy Bridge is within the area we cover. Our work covers the whole of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing.
Do you cover smaller places like Nethy Bridge?
Yes. Nethy Bridge is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We’ll tell you what we are using and why.
Are you fully insured?
Yes. We’re fully insured, and we have been doing sealant work for more than 20 years.
Will there be a smell?
Possibly a little. Any smell clears as the sealant cures.
What colour sealant will you use?
Most bathroom joints are white or clear, but other colours are available. We choose one to suit the room before we begin.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Can tenants book the work?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
